SPECIAL REPAIR TO SINGLE SAILORS ACCOMMODATION P 58 AT INHS ASVINI UNDER AGE I ASVINI COLABA MUMBAI

Amount

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat) and removing rubbish off MoD premises complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

Material and labour Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) on ceiling ,pins,facia and chajjas in CM 1:3 complete all as specified and directed.

Taking down GI steel tubing and connections including cleaning for removal 15mm bore complete all as specified and directed.

All as per item No. 5 above but 20mm bore

All as per item No. 5 above but 25mm bore

All as per item No. 5 above but 32mm bore

All as per item No. 5 above but 40mm bore

All as per item No. 5 above but but 50mm bore

Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided for and removing rubbish off MD premises

Demolition of Lime concrete of any description and in any position not otherwise specifically provided for and removing rubbish off MoD premises complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:3 or concrete surface or brick surface finished fair and even with using extra cement to sunken floor with WPC complete all as specified and directed. Note :-WPC shall be measured and paid separately.

Material and labour Bitumen blown 85/25 grade, applied hot , two coats to concrete surface at the rate of 1.5 kg per Sqm per coat complete all as specified and directed.

Material and labour for Lime concrete 1:2 in mass filling in sunken portion with brick aggregate complete all as specified and directed.

Material and labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and directed.

Material and labour 40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

Material and labour Non skid ceramic white joint free tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm screed bed or bedding layer in CM 1:4 complete with water proofing compound complete all as specified and directed.

Supply and fix Coloured Glazed ceramic tiles in vertical surface 300x450x7mm thick set & jointed in neat cement slurry & pointed in white or coloured cement to match over and incl 15mm thick plaster in CM(1:4) complete with water proofing compound complete all as specified and directed.

Material and labour Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete and including 20mm thick screed bed in CM(1:4) complete all as specified and directed.

Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:6) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Material and labour Marble tiles (markhana white) in any size 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types and including 20mm thick screed bed in CM(1:6) complete all as specified and directed.

Material and labour Marble work (Baroda Green) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade other than white and black over 15 mm thick Screed in CM (1:4) complete all as specified and directed.

Supply and fix GI tube, 15mm bore, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No. 24 above but 20mm bore

All as per item No. 24 above but 25mm bore

All as per item No. 24 above but 32mm bore

All as per item No. 24 above but 40mm bore

All as per item No. 24 above but 50mm bore

Supply and fix vitreaous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) with 'S' trap, front or back inlet etc. including connection to trap and to flushing pipe and provision of lime concrete bedding complete all as specified and as directed

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and as directed

Supply & fixing in repair Low Level flushing, cistern valve less Symphonic action type 10 Litre Cap with inlet valve, float and handle including bracket in repair complete all as specified & directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm fixed in repairs complete all as specified and directed.

Supply and fix in repairs bib tap chromium plated brass fancy type 15mm with erutch or butter fly handle complete all as specified and as directed

Supply and fix in repairs CP Pillar taps 15 mm bore, cast copper alloy, chromium plated fancy type complete all as specified and directed.

Supply and fix Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) complete all as specified and directed.

Supply and fix 125mm size, Brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

Supply and fix Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

Supply and fix soap dish fixed with and including CP brass screws complete all as specified and as directed

Supply and fix PVC waste pipe 32mm dia, 800mm long fixed with waste coupling all as directed

Supply and fix in repair Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) complete all as specified and directed.

Supply and fix in repairs CI Nahani trap plain with grating including jointing to waste pipe fixing in cement concrete type B1(1:2:4) complete all as specified and as directed

PVC (SWR) floor trap plain with grating 75mm dia outlet including jointing with solvent cement to waste pipe all as specified and directed

Material and labour PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed

Supply and fix PVC (SWR) pipes in repairs 75mm bore double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

Supply and fix PVC (SWR) pipes in repairs 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

Supply and fix PVC (SWR) bends any radius 75mm dia complete all as specified and directed

Supply and fix PVC (SWR) bends any radius 110mm dia complete all as specified and directed

Supply and fix PVC (SWR) branch piece, double ( double Y) equal or unequal 110mm dia complete all as specified and directed

Supply and fix PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed

Material and labour complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted surface on wall or ceiling complete all as specified and directed

Material and labour applying 2 coat of primer, and two coats of oil bound distemper on plastered/unplastered surfaces of wall complete all as specified and directed

Material and labour applying three coats of white wash on plastered/unplastered surfaces of ceiling complete all as specified and directed

Material and labour preparation of old undecorated surfaces of walls, soffitSupply and fixacias of beam, chajjas etc and applying one coat of weather proof Acrylic based paint (100% acrylic) exterior grade complete all as per manufacturers instructions including scaffolding, ladder upto 25 mtr height etc and all as per manufacturers instructions all as specified & directed all as specified & directed

Dismantling water tanks any pattern or positions & removing to store exc 250 & n exc 500 litres complete all as specified and directed

Dismantling water tanks any pattern or positions & removing to store exc 1000 & n exc 2000 litres complete all as specified and directed

Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 2000 Ltrs Capacity complete all as specified and directed

Supply and fix Sintex loft tank 250 Ltr capacity in a position, complete all as specified and directed

Dismantling Mild Steel of any description complete all as specified and directed

Supply and fix Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed

Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified

Supply and fix Mild steel, plain black sheet 1.60mm thick in wall cladding, steel gates & similar work, cut to size etc. complete all as specified and directed

Material and labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed

Material and labour for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

Supply and fix in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

Taking down shutters incl frames (without taking off shutters from the frames) are not exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutters incl frames (without taking off shutters from the frames) are exc. 1.5 sq. m each but n exc 4 Sqm Each complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified and directed.

Supply and fix in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fix in repairs Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix Plain, framed, panelled shutters 30mm thick any number of panels) with panesl of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chawkats complete all as specified and directed.

Supply and fix Aluminium, anodised, barrel tower bolts 125 mm long of extruded section complete all as specified and directed

Supply and fix Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed

Supply and fix Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionSupply and fixixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

All as per item above but 125mm size complete all as specified and directed

Supply and fix Aluminium handles 125mm size, cast type, anodised complete all as specified and directed

All as per item above but 150 mm size complete all as specified and directed

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed

Supply and fix powder coated aluminium sections of various sizes required of sliding or fixed type for frame and shutters of doors, windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading,rubber packing, screws and all other fittings like locking arrangement for shutters, handles, tower bolts hinges etc. all as specified and directed Note :- (i) Glazing and aluminium wire mesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight.

Supply and fix Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

Supply and fix in repair aluminium anodised DECO grill 10mm thk, DG-104 fixed with necessery U/F/H channel, including cutting for handles tower bolts etc and providing U clip conceal the rough edges etc complete all as directed by Engr-in-charge.

Material and labour for 4.8 mm thick sheet glass ordinary quality and glazing with oil putti in square in n exe 0.50 Sqm in each pane

Supply and fix in repairs Aluminium alloy wire cloth , 0.56 mm nominal dia of wire and average width of aperture 1.40mm complete fixed with aluminium wire staples and beads etc all as specified & directed .

Supplying only Integral waterproofing compound ISI marked.

Taking down APP tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

Material and labour for 10mm thick screed bed or bedding layers in cement mortar (1:4) mixing with water proofing compound , in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. NOTE : Polymeric membrane and WPC shall be measured and paid separately.

Material and labour PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound in top layer @ 3% by weight of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. Note: Water proofing compound shall be measured and paid perarately.

Material and labour for water proofing treatrment to non accesible RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (Note :- Bituminuous primer shall be "TANK MASTIC" manufactured by M/S IWL Limited or "EMUFALTE" manufactured by M/s Texsa India Ltd.) (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 4mm thick weight not less than 3.5 Kgs/Sqm. The APP membrane shall be taken to minimum 200mm on vertical surfaces The edge of the membrane shall be fixed with termination bar and fasteners and end shall prperly sealed with sealant. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. The laying of membrane shall be got done through and authorised applicator of manufacturer of the membrane (ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of bituminous aluminium paint over APP membrane.

Taking down unserviceable copper/ aluminum point wiring of light/ fan/ sockets complete, removing materials from site and making good to disturbed surface of walls, floors etccomplete all as specified and directed.

Material and labour point wiring with 1.5 sq mm copper conductor (multistranded), fire retardent, single core PVC insulated, unsheathed, 1100 Volt grade cable conforming to IS-694 part I in and incl PVC casing and capping with all accessories and terminated in PVC modulded box with plate of suitable size, duly earthed with PVC insulated 1.5 sq mm copper conductor cable in green colour for earth continuity conductor to earth dolly complete as specified for one light/ fan point/ bell point controlled by on switch complete all as specified and directed.

All as per item No. 93 above but one 3 pin 5 amp socket on same board complete all as specified and directed.

All as per item No. 93 above but 5 A Switch socket combition on independent board complete all as specified and directed.

Material and labour point wiring with 2.5 sq mm copper conductor (multistranded), single core PVC insulated, unsheathed, 1100 volt grade cable conforming to IS-694 part I in and incl PVC casing and capping with all accessories and terminated in PVC moulded modular box with duly earthed with PVC insulated 2.5 sq mm copper conductor cable in green colour for earth continuity conductor to earth dolly complete as specified for on 6 pin 5/15 Amps switch cosket combination on independent board complete all as specified and directed.

Supply and fix Switch flush and modular type, single pole one way 5 Amps complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite 65/50mm, two to three terminal complete all as specified and directed.

Supply and fix switch socket combination modular type 2 in 1, 6 pin/ 16 amp flush type 3 module complete all as specified and directed.

Supply and fix socket modular 2 in 1, 6 pin 6 amp flush type complete all as specified and directed.

Supply and fix switch and socket modular type 2 in 1, 6 pin 5 amp flush type universal complete all as specified and directed.

Taking down old unserviceable wall mounted LED light fitting any type complete all as specified and directed.

Supply & fix wall mounted LED light fitting 20watt model no BNO21C LED 20S PSU of make philips complete all as specified and directed.

Supply and fix wall mounted LED light fitting 20watt complete all as specified and directed. Make : Philips Cat Part No BNO21C LED 20S PSU or equivalent Bajaj/C&S/Havells

Taking down old unserviceable ceiling fan carefully and deposited in to MES store all as diected.

Supply and fix ceiling fan 5 star rating 230V 50 Hz including connecting wire 3 core 1.5 sq mm from ceiling rose to fan connector all as directed. Make : Bajaj/ Crompton/Usha

Taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose including refixing the same after painting with two coats synthetic enamel paints and writing MES No. all as directed by Engr-in-Charge.

Supply and fixing regulator electronic step and modular box type 230 V 50 hz Make Anchor.

Taking down and refixing exisiting hanging wires any type putting in to casing and capping of any size refixing by securing the same by suitable fixing Acessories all as directed. Note :- Many wires put in same casing patty will be measured as the one length of cassing patti.

Replacement of Sub main wiring with PVC insulated cable 2 single core 4 sqmm 1100 V grade with stranded copper conductor on and including rigid PVC casing capping (ISI marked) including all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor one single core 4 Sq mm for earth continuity all as directed. (Note : 2 runs of 4 Sqmm cable and 1run of 2.5 Sqmm earth wire shall be measured as one length.)

Supply and fix MCBDB TPN 8 way vertical load double door type sheet metal clad powder coated enclosure 415 V complete with bus bar, neutral links, blanking plates, prewired all as specified and directed. Note:- MCCB and MCBs has been considered & paid seperetely.

Supply and fix MCBDB SPN 8 way vertical load line double door type sheet metal clad powder coated enclosuer 230 V complete with bus bar, neutral links, blanking plates, all as directed. Note:- MCBs has been considered & paid separately.

Supply and fix MCB SP 240V, 50Hz, 10 KA 6-32 A complete all as specified and directed.

Supply and fix MCB SPN 240V, 50 Hz, 10 KA 20-32 A complete all as specified and directed.

Supply and fix MCB TPN isolator 35-60 Amps 415 Volts complete all as specified and directed.

Supply and fix MCCB 63 A 16 KA,415V,4 pole complete all as specified and directed.

SHREE JAGDISH FURNITURE CO.

Darpan Construction

Shetty Construction Co

ORIENT ELECTRIC CO

Idustrial products India

M/s JAYPEE ENTERPRISES