Civil and Interior Furnishing work of Computer Lab and Library

Amount

Civil and Interior work of 35 seater computer lab of size 522 sqft

Computer Desk(21 Seats)- PROVIDING AND FIXING AT SITE 600 MM DEEP 3 SEATER COMPUTER DESK TO BE MADE UP OF 19 MM. BWP PLY (710). THE REAR PARTITION IS TO BE COVERED WITH 12.0MM THICK PLY.HEIGHT OF THE DESK WILL BE 750MM & WIDTH WILL BE 7.5FT. ARE TO BE FINISHED WITH APPROVED SHADE OF 1.0MM THICK LAMINATED FINISH ON ALL THE SIDES, ALL THE EXPOSED EDGES TO HAVE 1MM THICK LAMINATE BEADINGS, TO BE FINISHED WITH APPROVED SHADE OF MELAMINE POLISH, THE COST SHALL INCLUDE ALL MATERIALS, LABOUR, ALL ACCESSORIES, SUCH AS HANDLES, CATCHERS, ETC. THE MEASUREMENTS SHALL BE GIVEN FOR ONLY THE FRONT PORTION OF THE CUPBOARD.

Computer Desk(14 Seats)- PROVIDING AND FIXING AT SITE 600 MM DEEP 2 SEATER COMPUTER DESK TO BE MADE UP OF 19 MM. BWP PLY (710). THE REAR PARTITION IS TO BE COVERED WITH 12.0MM THICK PLY.HEIGHT OF THE DESK WILL BE 750MM & WIDTH WILL BE 5FT. ARE TO BE FINISHED WITH APPROVED SHADE OF 1.0MM THICK LAMINATED FINISH ON ALL THE SIDES, ALL THE EXPOSED EDGES TO HAVE 1MM THICK LAMINATE BEADINGS, TO BE FINISHED WITH APPROVED SHADE OF MELAMINE POLISH, THE COST SHALL INCLUDE ALL MATERIALS, LABOUR, ALL ACCESSORIES, SUCH AS HANDLES, CATCHERS, ETC. THE MEASUREMENTS SHALL BE GIVEN FOR ONLY THE FRONT PORTION OF THE CUPBOARD.

Seating Bench (21Seats)- PROVIDING & FIXING 7.5 FT LONG & 1 FT WIDTH SEATING BENCH MADE UP WITH 2MM THICK MS HOLLOW TUBE OF 1” WITH MEDIUM BACK. THE SEATING AREA & BACK WILL BE MADE UP OF 19MM PLY (710) WITH BOTH SIDE LAMINATE OF 1 MM. WITH ALL FITTING, ACCESSORIES, LABOURS AS PER DRAWING AND DESIGN, ALL LABOUR, MATERIALS, ETC COMPLETE

Seating Bench(14 Seats)- PROVIDING & FIXING 5 FT LONG & 1 FT WIDTH SEATING BENCH MADE UP WITH 2MM THICK MS HOLLOW TUBE OF 1” WITH MEDIUM BACK. THE SEATING AREA & BACK WILL BE MADE UP OF 19MM PLY (710) WITH BOTH SIDE LAMINATE OF 1 MM. WITH ALL FITTING, ACCESSORIES, LABOURS AS PER DRAWING AND DESIGN, ALL LABOUR, MATERIALS, ETC COMPLETEMANUSCRIPTS AS WELL AS THE LEGEND’S ACCESSORIES AND WRITINGS.

Electrical Arrangement- THE LAB SHOULD BE WELLY EQUIPPED WITH DOUBLE LED TUBE LIGHTS AND FAN AND PROPER SWITCH & SOCKET ARRANGEMENT AT EVERY COMPUTER DESK SET UP. EVERY MATERIALS SHOULD BE WITH STANDARD MANUFACTURING ONLY,(HAVELLS/PHENOLEX/PHILIPS OR SUCH)

Networking- PROVIDING STANDARD CAT 6 CABLE TO CONNECT THE COMPUTERS THROUGH INTERNET

Painting- ONE COAT PUTTY AND TWO COAT COLOUR AT THE LAB WITH ASIAN PAINTS/BERGER OR BRANDS ONLY

Civil Work- FLOOR CUTTING WITH EXPERTS FOR ELECTRICAL AS WELL AS LAN WORK UNER THE FLOOR AND FINISH THE SAME AFTER COMPLETION OF WORK.

Interior Furnishing work of Library

FULL HEIGHT BOOK SHELF (LIBRARY)-PROVIDING AND FIXING AT SITE 600 MM DEEP BOOK SHELVES. CUPBOARD STRICTLY AS PER THE FINALISED DESIGN OR AS PER ADMINISTRATION GUIDELINE, TO BE MADE UP OF 19 MM. BWP PLY (710) WITH SHELVES AGAIN OF 19 MM. PLY. THE REAR PARTITION IS TO BE COVERED WITH 12.0MM THICK PLY.HEIGHT OF THE BOOK SHELF WILL BE 10FEET & WIDTH WILL BE 8FEET TOO. THE CUPBOARD SHALL HAVE OPEN RACKS, THE OPEN SHELVES ARE TO BE FINISHED WITH APPROVED SHADE OF 1.0MM THICK LAMINATED FINISH ON ALL THE SIDES, ALL THE EXPOSED EDGES TO HAVE 1MM THICK LAMINATE BEADINGS, TO BE FINISHED WITH APPROVED SHADE OF MELAMINE POLISH, THE COST SHALL INCLUDE ALL MATERIALS, LABOUR, ALL ACCESSORIES, SUCH AS HANDLES, CATCHERS, ETC. THE MEASUREMENTS SHALL BE GIVEN FOR ONLY THE FRONT PORTION OF THE CUPBOARD.

HALF HEIGHT BOOK STORAGE (LIBRARY)-PROVIDING AND FIXING AT SITE HALF HEIGHT STORAGE CABINET 6' HIGH FULLY COVERED FROM ALL SIDES AND 18" DEEP INCLUDING NECESSARY SHELVES AS PER THE DESIGN AND SPECIFICATIONS WITH OPENABLE SHUTTERS MADE UP OF 19MM (710) COMMERCIAL PLY, THE REAR PORTION IS TO BE CLOSED WITH 12.0MM PLY , THE CABINET IS TO BE FINISHED WITH 1.0MM THICK LAMINATED FINISH ON EXTERNAL SURFACES AND 0.8MM THICK LAMINATED FINISH ON INSIDE SURFACES. ALL THE EXPOSED EDGES TO BE FINISH WITH 1MM LAMINATE BEADINGS FINISHED WITH MELAMINE POLISH, THE COST SHALL INCLUDE ALL MATERIALS, ALL LABOR, ACCESSORIES ETC COMPLETE

GLASS MUSEUM GLASS COVERING-PROVIDING & FIXING TOUGHENED GLASS OF 12MM MADE STRICTLY AS PER THE GIVEN DESIGN & DRAWING. GLASS DOOR OF 2000 MM X 600 MM SHOULD BE FIXED AT THIS MUSEUM. THE MUSEAM SHOULD BE ACCOMMODATED WITH EXTRA LIGHT ARRANGEMENTS WITH ALL FITTING, ACCESSORIES, LABOURS AS PER DRAWING AND DESIGN, ALL LABOUR, MATERIALS, ETC COMPLETE

MUSEUM DISPLAY-WOODEN FRAMED & GLASS TOP 900MM(W) X 600MM(D) X 750MM(H) DISPLAY UNITS TO DISPLAY THE MANUSCRIPTS AS WELL AS THE LEGEND’S ACCESSORIES AND WRITINGS.

MUSEUM AREA LIGHT ARRANGEMENT-THE MUSEUM SHOULD BE WELLY EQUIPPED WITH DOUBLE LED TUBE LIGHTS AND LED HALOGEN FROM BOTTOM AT A REASONABLE DISTANCE TO HIGHLIGHT THE STATUE AND THE DISPLAY UNITS

STUDY UNIT (STUDENTS)-PROVIDING STANDARD STUDY UNITS FOR STUDENTS A STANDARD STUDYING PLACE OF 900 MM. BY WIDTH, BOTH SIDE PARTITION, TABLE HEIGHT OF 750 MM,500 MM DEPTH WITH 19 MM (710) PLY ,BOTH SIDE GLOSSY 1MM LAMINATE. EDGES WILL BE FINISHED WITH LAMINATE TOO

LIBRARIAN CABIN-MODULAR LIBRARIAN CABIN WITH L PATTERN EXECUTIVE TABLE & CHAIR. THE CABIN WILL INCLUDE A ALUMINUM HALF PARTITION BY HEIGHT OF 6 FT. TABLE WILL BE OF 19MM (710) ISI PLY ONLY, WITH STANDARD SIZE OF 1800MM X 600 MM X 750 MM FRONT & SIDE UNIT OF 300 MM X 600 MM X 750 MM. CHAIR WILL BE EXECUTIVE CHAIR ONLY

ASST. LIBRARIAN CABIN-MODULAR ASST. LIBRARIAN CABIN WITH L PATTERN EXECUTIVE TABLE & CHAIR. THE CABIN WILL INCLUDE A ALUMINUM HALF PARTITION BY HEIGHT OF 4 FT. TABLE WILL BE OF 19MM (710) ISI PLY ONLY WITH STANDARD SIZE OF 1800MM X 600 MM X 750 MM FRONT & SIDE UNIT OF 300 MM X 600 MM X 750 MM. WOODEN/EXECUTIVE CHAIR SHOULD BE PROVIDED.

BOOK ISSUE AND DISPATCH UNIT-PROVIDING & FIXING MODULAR TYPE BOOK DISPATCH UNITS WITH L PATTERN WORK STATION & CHAIR. APPROX. SIZE IS 1800MM X 600MM X 750 MM WITH 19 MM (710) PLY, BOTH SIDE GLOSSY 1MM LAMINATE. EDGES WILL BE FINISHED WITH LAMINATE TOO. ELECTRIC CONNECTION SHOULD BE PROVIDED TO THE UNITS AGAINST COMPUTER SET UP.

STAFF SITTING ZONE-PROVIDING & FIXING MODULAR TYPE STAFF SEATING & WORKING UNITS WITH STRAIGHT WORK STATION & CHAIR. APPROX. SIZE IS 1800MM X 600MM X 750 MM.THE UNITS INCLUDES A SIDE UNIT CONTAINING ONE DRAWER & ONE FLUSH DOOR AGAINST EACH SEAT. THE UNITS SHOULD BE MADE WITH 19 MM (710) PLY, BOTH SIDE GLOSSY 1MM LAMINATE. EDGES WILL BE FINISHED WITH LAMINATE TOO

REPAIRING & ADJUSTMENT OF EXISTING WOODEN BOOK SELF-FIXING AT SITE ALL EXISTING HALF & FULL HEIGHT WOODEN 150 MM DEEP, STRICTLY AS PER THE GIVEN DESIGN & DRAWING INCLUDING NECESSARY SHELVES AS PER THE DESIGN AND SPECIFICATIONS EXISTING WOODEN FURNITURE SHOULD BE MELAMINE POLISH & SERVICED BEFORE FINAL INSTALLATION. THE COST SHALL INCLUDE ALL MATERIALS, HANDLES, MAGNETIC CATCHERS, ALL LABOR, ACCESSORIES ETC COMPLETE.

REPAIRING & ADJUSTMENT OF EXISTING MS BOOK SELF-FIXING AT SITE ALL EXISTING HALF & FULL HEIGHT MS ALMIRAH TYPE BOOK STORAGE 150 MM DEEP, STRICTLY AS PER THE GIVEN DESIGN & DRAWING OR AS PER ADMIN GUIDELINE INCLUDING NECESSARY SHELVES AS PER THE DESIGN AND SPECIFICATIONS EXISTING MS FURNITURE SHOULD BE POWDER COATED IF REQUIRED & SERVICED BEFORE FINAL INSTALLATION. THE COST SHALL INCLUDE ALL MATERIALS, HANDLES, MAGNETIC CATCHERS, ALL LABOR, ACCESSORIES ETC COMPLETE

ALUMINIUM PARTITION WORK-ALUMINIUM PARTITION WORK FOR STAFF ROOM WITH LOCKERS MADE BY 19MM (710) PLYWOOD WITH BOTHSIDE 1MM LAMINATE.STAFF ROOM CONSISTS OF EXISTING CHAIR & TABLE

MODIFIED AREA LIGHT & FAN ARRANGEMENTS-THE EXTENDED PART OF LIBRARY SHOULD BE WELLY EQUIPPED WITH DOUBLE LED TUBE LIGHTS & FAN HANGING FROM TOP AT A REASONABLE HEIGHT TO GET THE LIGHT & AIR ON THE STUDY TABLES & CHAIRS.

VERTICAL BLINDS-PROVIDING AND FIXING AT SITE 100MM WIDE VERTICAL BLINDS OF APROVED SHADE & PATTERN ETC COMPLETE.

Civil work in Library

DEMOLISION OF EXISTING WALLS-DEMOLISH THE EXISTING 11 FT X 10 FT, 5 INCH BRICK WALL. THE DISPOSE MATERIALS SHOULD BE SHIFTED AS PER COLLEGE ADMINISTRATION GUIDELINE.

RENOVATION OF DEMOLISHED AREA-THE SITE AFTER DEMOLITION SHOULD BE FINISHED PROPERLY.

PAINTING-TWO COAT PAINT AT THE WHOLE LIBRARY

SUBHO CREATIONS (BID ID -5973504)

M.K ENTERPRISE (BID ID -5990509)