Construction of Walkway and Cycle Track, Jogging Track within TMC limit in Owala-Majiwada Constituent Assembly.

Amount

Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.

Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.

Cutting down trees including trunks and branches with girths above 90cm to 180cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.

Cutting down trees including trunks and branches with girths above 180cm to 270cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any.

Transplantation of existing trees of girth of all dia. including uprooting and shifting of the tree and placing in pits of suitable size and after transplanting, removal of excavated earth to desired location, filling the pit with red earth, manure, watering etc. complete with all leads, lifts, including maintenance for 3 years. The item also includes back filling of the trench taken for exposing the root system of the tree proposed to be transplanted etc. complete as directed by Engineer-in-charge.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

miiling upto 120 mm depth Asphaltic surface by using milling machine include…

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of Item No. 1000 metres, stacking serviceable and unserviceable materials separately etc. complete.

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed. Spec. No.: As directed by Engineer in charge

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge

Transportation of excavated material including loading and unloading etc. complete. e) lead up to 10 km

f) lead up to 15 km

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec. No.: Bd.A. 12 Page No. 19

Providing and casting in situ cement concrete 1:2:4 of trap / granite / quartzite / gneiss metal for foundation & bedding including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete, without Formwork Without SCADA with concrete mixer with hopper Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 70

Providing and laying concrete pipes of I.S.NP. class of --------- diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 625 a) 150mm dia.

b) 225mm dia.

c) 300mm dia.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and casting in situ cement concrete M-25 specified of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including plywood/steel centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). Without SCADA with concrete mixer with hopper Spec. No.: Bd.F.8 Page No. 93

Dewatering using 5 to 9 H.P. pumps for all drain C.D. and road construction work including diversion of stream, providing coffer dam bund etc. as directed etc. complete

Providing and casting in situ cement concrete of M-20 grade of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks andsuch other items including bailing out water formwork, compacting, roughening, them if special finish is to be provided and curing and finishing ifrequired complete, Without SCADA with concrete mixer with hopper Spec. No.: Bd.E.4 Page No. 72 and B-7, Page No.38 .

Providing and laying wedge shear elemental layer (WSEL) by using rubble stone of size 15 to 20 cm thick in single layer of 230 mm including packing the same with 20 mm to 40 mm thick aggregates ( normal size) and using stone powder of 40 mm to 50 mm thick on surface and watering & compacting by vibratory roller confirming layer thickness of minimum 200 mm and as directed by Engineer - in - charge etc complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam for grading II by manuals means specification including spreading in uniform thickness, hand packing rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density to protect edges, lighting, guarding, barricading and maintenance of diversion etc. complete. ..... as per techenical specification Cl. No. 405A

Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.

a) Extra over above for mixing polypropylene fibers 300 e3 Multi- Dimensional Graded Fibrillated 100% Vergin as per ASTM C 1116 III Type 4.1.3 Std. at the rate of 125 gms.per bag of 50 Kgs.of cement etc.

b) Extra over above for mixing Microsilica mineral admixture

Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/ contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60 mm in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing and Placing 5mm thick Thermocole in dummy and construction joints immdtly after cutting of joints and removing the same before dressing of dummy and construction joint as directed etc. complt.

Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and maintaining the same throughout 7 days curing period and removing the same material as directed.

Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal joints with hot rubberised sealing compound confirming to IS 1834-1984 after proper cleaning with compressed air, applying required primer & providing a layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse & longitudinal joints

Providing and lyaing of hot applied themoplastic compound 2.5mm thick Yellow / White including reflectorising glass beads @250 gms.per sqm area,thickness of 2.5mm is exclusive of surface applied glass bead as per IRC 35. The finished surface to be level, uniform and free from streaks and holes etc.complete with 3 years gruantee Spec. No.: MORTH CI.803 Page 388/2012 a ) White

b ) Yellow

Providing and laying in situ cement concrete M20 grade for road pavement supplying all materials, providing steel form work,compaction by plate vibrator, providing joints at everythirty meters internal and filling the joints withbitumen,curing etc.complete. (Excluding cost of reinforcement) (Newly laid concrete shall be covered bygunny bag/plastic sheet/tarpaulin etc. for curing periodcomplete.) Spec. No.: As directed by Engineer-in-charge

Supply of excavator cum loader machine (like JCB machine) etc complete

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesn etc. as per detailed designs and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting & erecting fixing in position with connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No.: Bd.C.2 Page No. 49

P/F precast M-25 grade concrete water table size 50 cm X30cm X 10cm etc. complete.

Providing & fixing kerb stones 30 cm to 40 cm long, 15cm wide, 38cm deep medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15cm thick & 25cm wide M-100 (1:3:6) C. C. bed including filling the joints with 1:2 C. M. pointing, curing etc. complete.(in M-25 grade)

Removing and resetting kerb stones in 1:2 C.M., on new M100 (1:3:6) c.c. bed, 15 cm, thick and 25 cm wide including filling in the joints with C.M. 1:2 pointing, curing etc. complete

Removing & resetting water tables 30 cm wide on a new M100 (1:3:6) cement concrete bed 15 cm. thick including filling in the joints with C.M. 1:2 and cement pointing, curing including removing the old cement bed, curing etc. complete

Providing and fixing cast in situ parabolic central divider of M-25 grade and applying 2 coats of flat oil paint etc. complete.

Providing , supplying and fixing Precast parabolic central divider of M-25 grade and applying 2 coats of flat oil paint etc. complete.

Providing and laying in trenches ---------- dia........... grade Galvanised iron pipes having embossed I.S.I. mark on it, of jindal/Tata/Zenith or equivalant make of .......... kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 596 a) 15 mm dia

b) 25 mm dia

c) 40 mm dia

d) 50 mm dia

Providing and laying in trenches …... mm dia. CPVC pipe of Prince / Sudhakar / Kishan / Supreme or equivalent make including necessary excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 596 and as directed by Engineer in charge a) 15 mm dia

b) 25 mm dia

c) 40 mm dia

P/L Bituminous tack coat of 60/70 grade on W.B.M surface, by manual / mechanical sprayer & applying bitumen @ 75 kg per 100 sq.m

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with mechanical broom

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)

P/L,mastic asphalt 40mm thick with 10/20 grade bitumen including producing the same at computerised batch mix plant,transporting the same to site by means of mastic cookers, laying the same with masticpaver and including all necessary tools, labours & barricading, spreading of aggregates as antiskid measures by means over newly laid mastic asphalt as per prevailing MCGM specification clause no.365 of 'Roadworks' as directed by Engineer in incharge (Note:The material specifications /gradation &content shall be as specified in the revelantI.S.Codes.)

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc.completed as directed by Engineer-in-charge (20 tonnes capacity) d)90X60 mm

Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 3mm aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square meter made out of 4mm aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class C ( Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.7 Page No. 409

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No.: As di

Providing & fixing Bollards of GI pipe of 80 mm dia of Ht 1.3 m with 300 X300X 10 mm base plate with anchor bar & 4 No

Providing and applying synthetic acryclic latex coating as per following specification Applying 2 coats of resurfacer coats, 1 coat of colour base coat, 2 coat of colour top coat total thickness of around 2-2.5 mm … including all material , labour etc.complete,.

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.

Providing,Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @ 5 kg per sqm,including texturing and covering with plastic sheet (min 200 micron thickness) and also applying tow coats of UV-stable,30% solids protecting from falling dust,dirt,etc complete as per the specifications and diretions of Engineer -in-charge or landscape architech

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

supplying & laying a solvent free. DECKSHIELD PU traffic Desk C Driverway & Parking Beys, walk ways

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and Fixing Fabricated Iron Spray Painted Bench of 24 Length of Approved Quality including all fixtures Finishing etc complete R.A 1.41

ProvidingI fabricating structure framework of 2 thickness using angle,tees as per detailed drawing fixing composite aluminium frame both side and 18 panel with decorative flex of required design and messages over it using necessary fittings and fixtures etc complete ( ACP PANELING FOR NAME BOARD & KATTA ETC WORK)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

SS Dust Bin two sides for extra strength during oscillating movement. Oscillating arrangement for easy unloading of Garbage. Area :0.765 Sqm , Capacity In Litres 42 Ltrs, Height : 0.92m

Repair & Paint of steel railing to bring it to original shape cleaning and repainting as per drawing etc. complete

Designing, Conceptualization & painting of 3D artistic on any surface at all height and location as directed. The paint should be used for the artistic painting is high quality acrylic paint. painting should be coated with weather proof warnish.

Providing Applying Scaling,Streching Decorative Wall Painting Including Priming Coat & finishing etc

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The hEight, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and hEight not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a Two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing Illuminated LED Kerbstones. size of Kerbstone will be (500mm, 150mm,150mm), Kerb Angle- 45 Degree,. Material Body- HDPE. Connectors Rating - IP67, Tested - ISO-IEC 60529, IRC 86-193, Madhur OMG, IS0694, LM 80, VLC, HLC,. Thermal Stablility - -40' to 120' celcious. Input voltage -230v AC, Output Voltage 36 V DC. Frequency 50hz. LED Operational life-10000Hrs.

TEST- Concrete Mix Design (with all tests on basic materials

Compressive Strength OF C.C. Cube 1 Test 600.00

Supply , Installation, Testing and commissioning of 3660mm height Pole made of circular mild steel pipe of two section (grade YST 210) Bottom section 139.7mm Dia x 3.6mm thick with 1000mm Height & Top section 76.1mm Dia x 2.6mm thick with 2648mm Height with arm length 850mm. Pole section welded by certified welders using high end Magnesium Inert Gas welding processes. Pressure Die Cast aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The bottom of the door is loacted at a height of 500 mm from its base plate.The control gear tray is prewired with single core 2.5 Sq.mm PVC wire, 6A SP MCB of Approved make and 32A stud type 4 way terminal block for loop-in / loop-out arrangement and to be connected with lugs and has a 5amp, 2 way terminal connector for luminiare and a provision for earthing. Mild steel mounting plate (Base Plate) 200mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at center to center 140mm. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is to be shot blasted (Inhouse). After shot blasting the pole is to be coated with Epoxy zinc rich phosphate primer and subsequently finished with pure polyester powder coating or using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.Light Fixture details : The Light fixture are with a build-in 24W LED module. High Brightness, LED Light source do not pose any environment risks. Die-cast aluminium heat sink of excellent thermal management. High efficiency polycarbonate optical lens. IP65 Ingress protection. IK08 impact protection. Colour rendering index (Ra) >80. Colour temperature shall be 3000K / 4000K / 5700K as per TMC Engineer and as per application. Lifespan of the luminaire is 60,000 operating hours, Operating ambient temperature range is from -15°C to +50°C. Driver shall be a Fixed constant current driver with an output current of 900 ma dc, 30Vdc , 27W. Driver efficiency > 80%, power factor > 0.95, THD < 10%, internal Surge Protection 4KV of the driver. Input Rated Voltage is 240V, 50-60 Hz. Input operating voltage range of 110-300 Vac. The driver shall have short circuit protection, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia or Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External Surge Protection Devices of 10KV shall be provided along with the fixture. Driver shall be of approved make.

Supply , Installation, Testing and commissioning of 3660mm height pole made of circular mild steel pipe (grade YST 210) 88.9mm Dia x 2.9mm thick with 2178mm Height. Decorative base made of Gravity Die-cast aluminium (245mm Dia x 206mm Height) in gold or black finish. The single arm bracket is a split constructed type, bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a Gravity Die cast mid section Aluminium embellishment in gold or black finish of 60mm with a clear height of 1150mm crowned at top from the collar and with a cast Iron decorative finial of 260mm clear height. The artistically curved single arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with leafy embellishment at Center in gold or black finsh , is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at the one ends and other end facilitates the fitment of luminaire at 624mm from the vertical axis of the bracket stem. Pole section welded by certified welders using high end Magnesium Inert Gas welding processes. Pressure Die Cast aluminium service door 348mm height x 80mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The bottom of the door is loacted at a height of 500mm from its base plate. The control gear tray is prewired with single Core 2.5 Sq.mm PVC wire, 6A SP MCB of approved make and with 32A stud type 4 way terminal block to take incoming cables with loop-in / loop-out arrangement and to be connected with lugs and has a 5 amp, 2 way terminal connector for luminiare and a provision for earthing. Any other internal cables and connections shall be covered in the contractors scope. Mild steel mounting plate (Base Plate) 230mm Dia x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at Pitch Center Distance 180mm. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension and are within +/- 5% tolerance. After fabrication, entire pole should be shot blasted (Inhouse). After shot Blasting the pole should be coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.

Supply , Installation, Testing and commissioning of 3660mm height Pole made of circular mild steel pipe of two section (grade YST 210) Bottom section 139.7mm Dia x 3.6mm thick with 1000mm Height & Top section 76.1mm Dia x 2.6mm thick with 2648mm Height. Pole section welded by certified welders using high end Magnesium Inert Gas welding processes. Pressure Die Cast aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The bottom of the door is loacted at a height of 500 mm from its base plate.The control gear tray is prewired with single core 2.5 Sq.mm PVC wire, 6A SP MCB of Approved make and 32A stud type 4 way terminal block for loop-in / loop-out arrangement and to be connected with lugs and has a 5amp, 2 way terminal connector for luminiare and a provision for earthing. Mild steel mounting plate (Base Plate) 200mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at center to center 140mm. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is to be shot blasted (Inhouse). After shot blasting the pole is to be coated with Epoxy zinc rich phosphate primer and subsequently finished with pure polyester powder coating or using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.

Supply, Installation, Testting and commissioning 3m Pole made of square mild steel pipe (grade YST 210). It has two section, Bottom section of the pole 100mm Square x 2.9mm thick with 1000mm height & Top section of the pole 60mm Square x 2.5mm thick with 1685mm height. Decorative Diecast Aluminium cone (124mm x 124mm x 80mm Height) covered on the both section joint area in the pole. The split constructed Single arm bracket made of MS pipe 60mm square x 2.5mm thick having 600mm arm length and 300mm height inclined at 10 degree. Single arm bracket contains build-in 24W LED module. Pole section welded by certified welders using high end Magnesium Inert Gas welding processes. Pressure Die Cast aluminium service door 330mm height x 75mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB of Approved make and 32A stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall be covered in the contractors scope. Mild steel mounting plate 200mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 300mm bolts of grade 4.6 at Center to Center 140mm. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension and weight are within +/- 5% tolerance. After fabrication entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options.Luminaire details : 24W LED Module with expected service life of at least 60,000 operating hours, High Brightness, LED Light source do not pose any environment risks. Excellent thermal management heat sink. High efficiency polycarbonate optical lens. IP65 Ingress protection. IK08 impact protection. Colour rendering index(Ra) >80. Available colour temperature 3000K / 4000K / 5700K. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency > 80%, power factor > 0.95, THD < 10%, Surge Protection 4KV. Driver is a Fixed constant current driver with an output current of 600mA, 50Vdc, 30W. Input Rated Voltage is 240V,50-60 Hz. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia or Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. BIS Certificate for Luminaire.

Supply installation testing and commissioning of Tier drop Luminaire of 40/50W. Decorative pendant / Hanging mounted compact street light. Type IV (Asymmetrical light distribution). Decorative luminaire made of specially contoured spun aluminium body of high corrosion resistance with a neck design for unique and better aesthetics and non corrosive stainless steel fasteners. Clear polycarbonate diffuser. The luminaire have extruded aluminium heatsink for thermal management with vertical fin design for longerlife of the LEDs. The mounting arrangement nipple, coupling & Hex nut made of Stainless steel 304 suitablefor mounting to internally threaded pipe of designation M30. Protection class IP65. Mechanical resistance IK09 (Polycarbonate diffuser). Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 5700K as per TMC Engineer and as per application. Colour rendering index (CRI)>70. Standard Deviation colour matching 3 MacAdam. Led module with expected service life of at least 72,000 operating hours. Driver shall be of approved make and are a Fixed constant current driver with an output current of 1200 MA, 48Vdc ,58W. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency > 85%, power factor > 0.95, THD < 10%, internal Surge Protection 6KV of the driver. Input Rated Voltage is 240V,50-60 Hz. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia / Lumiled/ cree or Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External SPD of 10KV shall be provided along with the fixture. Luminaire dimension : 425mm diameter x height 407 mm / 437mm. BIS Certified for Luminaire.

Supply Installation testing and commissioning of 50W Post Top Luminaire Technical Description : Post top luminaire with Symmetrical light distribution. Luminaire made of gravity die cast aluminium top cover with decorative knob on top, gravity die cast aluminium housing integrated with decorative base leg and base. Die-cast aluminium base suitable for mounting Ø60mm OD pole. Translucent UV stabilised acrylic diffuser formed from non-yellowing acrylic sheet. All external screws are made of stainless steel. Protection class IP65. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Input Rated Voltage is 240V,50-60 Hz. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia / lumiled/Cree Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External SPD of 10KV shall be provided along with the fixture. Luminaire dimension : 480mm length x 417mm width x 850mm height. BIS Certified for Luminaire.

Supply Installation testing and commissioning of 60W Post Top Luminaire Technical Description : Post top luminaire with Symmetrical light distribution. Luminaire made of spun aluminium, integrated with extruded aluminium pipe along with die cast aluminium base through supporting arms made fo gravity die cast aluminium and non corrosive stainless steel fasteners. Diffuser placed into the provision formed on the periphery of the bottom cover. Translucent UV stabilised acrylic diffuser. Die cast aluminium base suitable for mounting on Ø60mm OD pipe. Protection class IP65. Mechanical resistance IK07. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. SDCM-3 MacAdam.LED module with expected service life of at least 60,000 operating hours. Driver shall be K-lite/ Philips / Inventronics Driver is a Fixed constant current driver with an output current of 1050mA, 54Vdc ,58W. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Input Rated Voltage is 240V,50-60 Hz. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia / lumiled/Cree Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External SPD of 10KV shall be provided along with the fixture. Luminaire dimension : 600mm diameter x 443mm height. BIS Certified for Luminaire.

Supply Installation testing and commissioning of 50W Post Top Luminaire Technical Description : Post top luminaire with TypeIII (Asymmetrical light distribution). Gravity die-cast aluminium top cover with gravity die-cast aluminium decorative knob on top, Gravity Die- cast aluminium supporting arm integrated with die-cast aluminium base suitable for mounting Ø50mm OD pipe. All external screws are made of stainless steel. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)>70. LED module with expected service life of at least 72,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >88%, Power factor >0.95, THD <10%, Surge protection 6KV. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia / lumiled/Cree Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External SPD of 10KV shall be provided along with the fixture. Luminaire dimension : 325mm square x 545mm height. BIS Certified for Luminiare.

Supply Installation testing and commissioning of 60W Post Top Luminaire Technical Description : Post top luminaire with Symmetrical light distribution. Luminaire made of spun aluminium, integrated with extruded aluminium pipe along with die cast aluminium base through supporting arms made fo gravity die cast aluminium and non corrosive stainless steel fasteners. Diffuser placed into the provision formed on the periphery of the bottom cover. Translucent UV stabilised acrylic diffuser. Die cast aluminium base suitable for mounting on Ø60mm OD pipe. Protection class IP65. Mechanical resistance IK07. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. SDCM-3 MacAdam.LED module with expected service life of at least 60,000 operating hours. Driver shall be K-lite/ Philips / Inventronics Driver is a Fixed constant current driver with an output current of 1050mA, 54Vdc ,58W. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Input Rated Voltage is 240V,50-60 Hz. Input operating voltage range of 100-300 Vac. The driver shall have short circuit protection with automatic restart, Overvoltage Protection, thermal protection and No load protection. Led Source shall be of Nichia / lumiled/Cree Equivalent Make and shall be of standard deviation colour matching to 3 Step Mcadam. External SPD of 10KV shall be provided along with the fixture. Luminaire dimension : 600mm diameter x 443mm height. BIS Certified for Luminaire.

Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, dulyplastered as per design complete (for 3 to 5m octagonal/ conical GI pole).

Supplying and erecting pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. strip complete with all materials as per specification no. EA-EP

Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW SWR/MC

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided onduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing M20 concrete for resurfacing the road.

SITC of street light control panel inclusive of all electrical accessories mentioned in tender document with quartz electronic time switch

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

MSEDCL Charges

N A CONSTRUCTION PVT. LTD.