SPECIAL REPAIR TO STREET LIGHTS/SECURITY LIGHTS AT ZONE D AREA, OMC,3RPD AND ADJOINING AREA UNDER GE(E) MATHURA

Taking down unserviceable LED street/security/Building security/flood light fittings of any type / wattage / make etc fitted on LT poles, High Mast light poles, building etc for replacement with new one complete all as specified and directed. Notes- (i). Cost of taking down carefully from existing position after disconnecting electric connections, sealing cable ends, bringing to MES store yard, is deemed to be included in this item quoted rates. (iv) Contractor shall be responsible for all necessary required Tools, Plant & vehicle for replacement of security lights in the station without any any extra cost.

Supply and fixing in replacement of sheet moulding compound junction box shock and rust proof, termite resistant, tamper proof , front openable type for single phase, two wire rating of size 250x200x105mm complete with one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole / wall complete. Make - Sintex or equivalent in Hensel/ABB / Power System & Controls.

Supply and fix in replacement single phase of 5KW of automatic street light switch using Infrared Sensor based NATURAL SWITCH for automatic switching of street lights. nature switch operation should be based on Natural Light Lux level, required illuminance level for switching ON is ≤ 30 Lux and for switching off ≥ 10 Lux. The sensor should have part night operation facility of min 4 hrs to max 12 hrs. The sensor along with suitable power contractor of 20 to 25 Amps current rating. incoming MCB and outgoing MCBs of 20-25 Amps and auto- manual (sensor By pass), size of circuit should be multistranded FRLS min size of 10 Sqmm, selection operation should be enclosed in a pole/wall mounted enclosure made of rust proof, electric shock proof termite proof and FR grade special mounting compound (Sintex made SMC junction box) conforming to IP 54. complete all as specified

Supply & fixing in replacement multifunctional digital timer switch with inbuilt function for switching on/off street lights according to the rising/setting of the sun with combination function according to astronomical time and / or fixed preset times complete with all connection to existing panel as per directed & complete testing.Make-Legrand as per Cat Part No 4126 54 or equivalent L&T / C&S / Havells

Supply & fixing Automatic Security light control panel having sheet steel enclosure power coated CRCA sheet suitable for three phase,6 KW rating, outdoor installation,floor mounted, IP 54 protected including making all connections and grouted in PCC of type B-1 (1:2:4) with foundation should be 100mm above ground level complete with comprising of the following switch gears.- (i) MCB TPN 40Amp rating -01No (ii) Multifunctional Digital Timer Switch - 01 Nos (ii) Contactor with nominal current rating 32Amp TP (iii) Outgoing MCB SP with Suitable rating - 03 Nos (iv) Auto/manual switch (v) Incoming and outgoing terminal suitable for three phase supply.

M&L for scraping, stretching, cleaning the old paint, preparation of the surface for repainting. Painting LT 9 Mtr long PCC pole in Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint, writing pole Nos. & applying one coat of snowcem on PCC muff & remaining portion of the pole all as directed by Engr-In-Charge.

M&L for street light bracket made out of 40mm dia medium grade GI pipe of 1.2m length bent to required shape suitable for fixing street light / security light fitting on Steel tubular pole / RCC pole / including two Nos of clamps, nuts & bolts etc and two coats of aluminium paint over a coating of red oxide primer and Taking down of existing unserviceable rusted street light brackets with clamps, nuts and bolts etc, complete all as directed.

M&L for dismantaling of old cracked / unserviceable PCC poles / steel tubular pole struts any type and any size.

Supply and fixing in replacement of steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note: Earth work and PCC in foundation shall be measured separately.

Supply and fix in replacement steel tubular swan nacked pole with cast iron base plate, finial taper plug, bolts, nuts & washers made out of mild steel tubing, type 410 SP -31 (9 Mtr long) including marking pole No on pole including painting of poles with one coat of red oxide primer and two coat of aluminum paint (one coat before fixing and one coat of aluminum paint after fixing) over exposed surface and two coats of bituminous paint over embedded portion & the portion above coping shall be painted in Alternative bands of black and yellow colour starting with white colour (each band of 30cm wide) by two coats of super enameled paint upto 1.5m height complete all as specified and directed by Engr in Charge. Note: Earth work and PCC in foundation shall be measured separately.