Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC THE LOWEST TENDERER. | |
| 2 | L2₹15.2 L+₹54,002.80 (3.68%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 3 | L3₹16.1 L+₹1.4 L (9.84%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 4 | L4₹16.3 L+₹1.6 L (10.9%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 5 | L5₹17.8 L+₹3.1 L (21.4%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | JP ENTERPRISES L2 | Sunrise Traders L10 | visionenterprises L4 | S.R.M.K Enterprises L1 | ShreHari Civil Enginneering and Contractors L8 | AGREN ENTERPRISES L3 | A.S.ENTERPRISES L6 | M/S FJ ENTERPRISES L5 | BHARDWAJ ENTERPRISES L7 | A B S ENTERPRISES L11 | M/S SANDEEP CONSTRUCTION COMPANY L13 | Gruham Luxe Interiors L9 | BHABA CONSTRUCTION L12 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down existing water proofing treatment from RCC roof and stone slab including removal of plaster bed below felt / membrane and disposing of the same off the premises complete all as specified and directed. | 40 | 10 Sqm | 100 ₹4,000 | 100 ₹4,000 | 35 ₹1,400 Lowest | 400 ₹16,000 | 100 ₹4,000 | 95 ₹3,800 | 120 ₹4,800 | 300 ₹12,000 | 300 ₹12,000 | 150 ₹6,000 | 90 ₹3,600 | 550 ₹22,000 | 550 ₹22,000 |
| 2.00 | Material and Labour for providing water proofing plaster on slab average thickness 20mm in CM 1:3 mixing with liquid water proofing compound all as per manufactureres instructions, finished even and smooth without using extra cement complete all as specified and directed.
Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ. | 400 | Sqm | 120 ₹48,000 Lowest | 160 ₹64,000 | 120 ₹48,000 Lowest | 150 ₹60,000 | 190 ₹76,000 | 145 ₹58,000 | 240 ₹96,000 | 300 ₹1,20,000 | 200 ₹80,000 | 330 ₹1,32,000 | 250 ₹1,00,000 | 400 ₹1,60,000 | 225 ₹90,000 |
| 3.00 | Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE complete all as specified and directed. | 23.54 | Ltr | 50 ₹1,177.2 Lowest | 450 ₹10,594.8 | 250 ₹5,886 | 100 ₹2,354.4 | 150 ₹3,531.6 | 115 ₹2,707.56 | 180 ₹4,237.92 | 120 ₹2,825.28 | 120 ₹2,825.28 | 80 ₹1,883.52 | 500 ₹11,772 | 160 ₹3,767.04 | 155 ₹3,649.32 |
| 4.00 | Material and Labour for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof (An overlap of 100mm & 150mm shall be provided on sides and ends respectively) complete all as per manufacturers instructions. Finally, painting with a coat of bituminous aluminium paint @100gms / Sqm complete all as specified and directed. | 400 | Sqm | 500 ₹2,00,000 | 550 ₹2,20,000 | 350 ₹1,40,000 Lowest | 350 ₹1,40,000 Lowest | 450 ₹1,80,000 | 355 ₹1,42,000 | 480 ₹1,92,000 | 411 ₹1,64,400 | 440 ₹1,76,000 | 480 ₹1,92,000 | 420 ₹1,68,000 | 479 ₹1,91,600 | 410 ₹1,64,000 |
| 5.00 | Material and Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry in CM 1:3 complete all as specified and directed | 50 | RM | 30 ₹1,500 Lowest | 200 ₹10,000 | 200 ₹10,000 | 75 ₹3,750 | 150 ₹7,500 | 145 ₹7,250 | 90 ₹4,500 | 80 ₹4,000 | 250 ₹12,500 | 620 ₹31,000 | 700 ₹35,000 | 110 ₹5,500 | 150 ₹7,500 |
| 6.00 | Material and Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) complete all as specified and directed | 50 | RM | 30 ₹1,500 Lowest | 200 ₹10,000 | 70 ₹3,500 | 75 ₹3,750 | 150 ₹7,500 | 155 ₹7,750 | 250 ₹12,500 | 115 ₹5,750 | 250 ₹12,500 | 550 ₹27,500 | 700 ₹35,000 | 175 ₹8,750 | 150 ₹7,500 |
| 7.00 | Material and Labour for Hydraulically pressed burnt clay tile plain of size 200mm x 200mm x 19/20mm machine made laid over & including 20mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound and jointed, pointed in neat cement slurry mixed with 5% crude oil by weight of cement complete all as specified and directed.. | 50 | Sqm | 800 ₹40,000 | 1,300 ₹65,000 | 700 ₹35,000 | 1,200 ₹60,000 | 1,200 ₹60,000 | 355 ₹17,750 Lowest | 1,600 ₹80,000 | 890 ₹44,500 | 850 ₹42,500 | 550 ₹27,500 | 700 ₹35,000 | 1,200 ₹60,000 | 365 ₹18,250 |
| 8.00 | Making hole and Material and Labour for fixing nozzles in construction joints/whereas required and patching the joint with cement sand mortar and grouting or other equivalent with pressure pump 40 to 60 PSI in the nozzle thus fixed with cement slurry admixed with Non shrink polymeric grouting compound complete all as specified and directed.
Make : Pidilite or equivalent make as approved by GE. | 1,000 | Each | 300 ₹3,00,000 | 300 ₹3,00,000 | 100 ₹1,00,000 Lowest | 300 ₹3,00,000 | 500 ₹5,00,000 | 245 ₹2,45,000 | 250 ₹2,50,000 | 140 ₹1,40,000 | 100 ₹1,00,000 Lowest | 450 ₹4,50,000 | 400 ₹4,00,000 | 170 ₹1,70,000 | 595 ₹5,95,000 |
| 9.00 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 260 | Sqm | 10 ₹2,600 Lowest | 20 ₹5,200 | 40 ₹10,400 | 40 ₹10,400 | 25 ₹6,500 | 15 ₹3,900 | 20 ₹5,200 | 50 ₹13,000 | 20 ₹5,200 | 90 ₹23,400 | 80 ₹20,800 | 75 ₹19,500 | 75 ₹19,500 |
| 10.00 | Material and Labour for Coloured ceramic tiles in vertical surface 300mm x 200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. | 140 | Sqm | 650 ₹91,000 | 1,250 ₹1,75,000 | 1,000 ₹1,40,000 | 700 ₹98,000 | 900 ₹1,26,000 | 999 ₹1,39,860 | 720 ₹1,00,800 | 1,275 ₹1,78,500 | 1,200 ₹1,68,000 | 120 ₹16,800 Lowest | 1,000 ₹1,40,000 | 1,400 ₹1,96,000 | 1,100 ₹1,54,000 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
17 Jan 2026, 6:00 pmClosed
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
REPAIRS TO WATER PROOFING TREATMENT TO ROOF AND RELATED WORKS IN CERTAIN TECHNICAL BUILDINGS AND OTM ACCN AT MH KHADKI UNDER GE MH RH KHADKI
2025_MES_746227_1
8816/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹40,000
20 Feb 2026
26 Dec 2025
19 Jan 2026
26 Dec 2025
17 Jan 2026
10 Jan 2026
26 Dec 2025 - 17 Jan 2026
Taking down existing water proofing treatment from RCC roof and stone slab including removal of plaster bed below felt / membrane and disposing of the same off the premises complete all as specified and directed.
Material and Labour for providing water proofing plaster on slab average thickness 20mm in CM 1:3 mixing with liquid water proofing compound all as per manufactureres instructions, finished even and smooth without using extra cement complete all as specified and directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE complete all as specified and directed.
Material and Labour for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof (An overlap of 100mm & 150mm shall be provided on sides and ends respectively) complete all as per manufacturers instructions. Finally, painting with a coat of bituminous aluminium paint @100gms / Sqm complete all as specified and directed.
Material and Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry in CM 1:3 complete all as specified and directed
Material and Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) complete all as specified and directed
Material and Labour for Hydraulically pressed burnt clay tile plain of size 200mm x 200mm x 19/20mm machine made laid over & including 20mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound and jointed, pointed in neat cement slurry mixed with 5% crude oil by weight of cement complete all as specified and directed..
Making hole and Material and Labour for fixing nozzles in construction joints/whereas required and patching the joint with cement sand mortar and grouting or other equivalent with pressure pump 40 to 60 PSI in the nozzle thus fixed with cement slurry admixed with Non shrink polymeric grouting compound complete all as specified and directed. Make : Pidilite or equivalent make as approved by GE.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and Labour for Coloured ceramic tiles in vertical surface 300mm x 200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
Material and Labour for non-skid ceramic coloured tiles 7 mm to 8 mm thick (square/ rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.
Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for as in sunken floors and similar locations complete all as specified and directed.
Material and Labour for PCC M-5 grade (nominal mix) using 40mm graded stone aggregate as in mass concrete or as in sunken floor complete all as specified and directed.
Material and Labour for waterproofing treatment to RCC sunken slab as specified below complete all as specified and directed:- Make: PIDILITE or equivalent make as approved by GE.
(a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc.
b) Material and Labour for Making hole and fix 12mm dia GI Nozzle @0.5 mtr c/c on the entire area of sunken portions and applying chemical injection grouting through the nozzles with cement slurry admixture with dr fixit bath seal grouting or other equivalent with pressure pump in 40 PSI.seal off the nozzle and cutting the same after grout has set as specified and directed by engineer in charge
(c) Form angle fillet of size 40 mm x 40 mm thick cement sand mortar (1:3) admixed with diluted ("Dr Fixit" Pidicrete URP" or equivalent) as per manufacturer instruction.
(d) Wet the surfaces with water to make it saturated surface dry condition
(e) Sanitary pipes entering through walls and floor shall be sealed with " Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout " Dr Fixit Bathseal Grout" or eqvt .Nahani traps , etc to be fitted securely and the gaps around it to grouted in the same manner.
(f) Ponding test for water leakage will be carried as per IS 3370 part 1.
(g) Applying 20 mm thick plaster in C:M 1:3 mixed with water proofing compound 3% by weight of Cement or as per manufacturer instruction
(h) Plumbing works to be provided according to proper level&slope seal off the pipes and back fill the gap properly and provide 40mm Outer dia UPVC spout pipe at the lowest point with 300mm projection beyond the outer face of the wall.
Material and Labour for tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner again washing with fresh jet water, scratching the joints and filling the same with (white / matching colour) epoxy tile grout curing, cleaning the surface etc, complete all as specified and directed. Make : M/s Pidilite or equivalent make as approved by GE.
Supply and Fixing plain 145 gsm fibre glass mesh and apply one coat of Acrylic polymer modifed cementious slurry coating by brush and cover it with 100 mm overlap both ways after necessary preparation of surface when it is still wet complete all as per manufacturers instructions. Apply second coat of the same coating on the angle fillets and allow it to dry completely and turned upto 150mm from FFL at Bath/WC /Kitchen area's and all as per instruction complete all as specified and directed. Make : Dr Fixit Bathseal Plus or equivalent make as approved by GE.
Material and Labour for providing water proofing plaster at the junction of wall and slab at chajjas, lintels etc, of average thickness 20mm in CM 1:3 mixed with liquid WPC as per manufacturers instruction finishing the surface even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Material and Labour for applying two coats of fibre reinforced elastromeric liquid water proofing membrane coating over and including coat of prime seal on roof complete all as specified and directed. Make :Dr Fixit Prime seal or equivalent.
Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.
Material and Labour for 15 mm thick rendering on fair faces of brickwork / concrete surface on wall in CM 1:4 using WPC @ 3% by weight of cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Material and Labour for preparation of newly plastered surfaces and applying two coats of weather proof acrylic exterior grade paint (100%) Acrylic over and including one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed.
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Supplying & laying in trenches 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 conforming to IS 1239 (Part-2): 2011 complete all as specified and directed.
Supplying & laying in trenches 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 conforming to IS 1239 (Part-2): 2011 complete all as specified and directed.
Re-fixing 15mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete all as specified and directed. Note: Serviceable pipes obtained shall be re-used
Re-fixing 20mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete all as specified and directed. Note: Serviceable pipes obtained shall be re-used
Supply and Fixing in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed.
Supply and Fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed.
Supply and Fixing in repairs PVC low level flushing system 10 Ltr capacity with flush pipe complete as specified and directed.
Supply and Fixing in repairs stopvalves cast copper alloy screwed down high pressure withcrutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed.
Supply and Fixing in repairs two way bib tap 15mm chromium plated complete all as specified and directed.
Supply and Fixing Health faucet, Hand Shower, with 1mtr Long easy flex tube in chrome finish & wall hook complete all as specified and as directed.
Supply and Fixing in repairs grating square or circular 125mm dia of PTMT (minimum weight 100 gms, complete all as specified and directed.
Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
Supply and Fixing 110mm dia PVC (SWR) pipes Type 'A' single socketed, in any length with rubber ring joints fixed on wall complete all as specified and directed
Supply and Fixing 75mm dia PVC (SWR) pipes Type 'A' single socketed, in any length with rubber ring joints fixed on wall complete all as specified and directed
Supply and Fixing PVC (SWR) 110mm dia bends any radius complete all as specified and directed.
Supply and Fixing PVC (SWR) branch 110mm bore pieces, single (single Y) equal or unequal complete all as specified and directed.
Supply and Fixing PVC (SWR) 75 mm dia bends any radius complete all as specified and directed.
Supply and Fixing PVC (SWR) branch 75 mm bore pieces, single ( single Y ) equal or unequal complete all as specified and directed.
Supply and Fixing PVC (SWR) gully trap 125mm/110mm setting and jointing in solvent cement complete all as specified and directed.
Supply and Fixing 75 mm bore PVC Floor trap, with grating including jointing to waste pipe fixed in cement concrete1:2:4, type B-1 (20 mm graded stone aggregate) complete all as specified and directed.
Supply & Fixing in repairs viterious china wash basin white flat back size 550 mm x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and directed.
Supply and Fixing in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold Withlong screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and directed.
Supply and Fixing in repairs fancy type bib taps chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and directed.
Supply and Fixing of PVC connections 15mm size with brass nut on both end washers of length 450mm complete all as specified and directed.
Material and Labour for cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise n. exc 100 sq.cm complete all as specified and directed.
Material and Labour for cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise exc 100 sq.cm and n.exc 250 sq.cm complete all as specified and directed.
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
BOQ_835585.xls
BOQ • 0.30 MB
TENDER8816.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .