Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹50.0 L+₹1.3 L (2.75%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹50.2 L+₹1.5 L (3.13%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹50.5 L+₹1.8 L (3.80%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹51.5 L+₹2.9 L (5.92%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹48.1 L
EMD Value
₹96,180
Closing Date
3 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPECIAL REPAIR TO BLDG NO T98 OF CESR T20 OF GE 868 AND PROVN OF ROOM NEAR BLDG NO T129 SPEAR TOP UNDER AGE BR II AT RMS
2023_MES_609280_1
8559/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹96,180
12 Sept 2023
15 Jul 2023
5 Aug 2023
15 Jul 2023
3 Aug 2023
29 Jul 2023
15 Jul 2023 - 21 Jul 2023
Amount
Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering etc complete all as specified and as directed.
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, etc complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complate all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specifed and as directed
M&L for Second class clean sawn hardwood in scantling fixed in timber framed work complete all as specified
Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) etc complete all as specified and as directed.
Taking down door chowkats with shutter exc 1.5 but not exc 4 sqm each (without taking off shutters from the frame) etc complete all as specified and as directed.
Taking down door shutter exc 1 sqmtr but n exc 2 sqmtr each and removing to store etc complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc complete all as specified and as directed.
M&L for Cement concrete type B-1 (1:2:4), as in levelling course (using 20 mm graded stone aggregate), 40 mm thick etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.
M&L for dark shade Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15 mm thick in CM 1:6 etc complete all as specified and as directed.
All as per Item No-17 here-in-above but in vertical surfaces such as skirting over and including backing coat of 10 mm thick in CM 1:4 etc complete all as specified and as directed.
S&F size of frame 125 x 60mm Pressed steel frames (1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
S&F Anodised aluminium ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F Plain, solid straight chowkat and frames, wrought, frmed rebated on the solid, rounded or chamfred put together with glue pinned at joints , supplied and fixed in 2nd class hard wood etc complete all as specified and as directed.
M&L for 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed.
S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F Powder Coating aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.
S&F for providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh will be paid seperately etc complete all as specified and as directed.
M&L for Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
all as per Item No-27 above but one coat on old wooden surfaces etc complete all as specified and as directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.
S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and as directed.
S&F Aluminium bow handles, cast type, anodised 150 mm long etc complete all as specified and as directed.
S&F Aluminium bow handles, cast type, anodised 125 mm long etc complete all as specified and as directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed.
M&L for Brickwork with subclass ‘B’ bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed etc complete all as specified and as directed.
All as per Item No- 34 here-in-above but half brick walls built in CM (1:4), etc complete all as specified and as directed.
All as per item 34 above but using old bricks retrieved from demolition including cleaning and removal of mortar from old bricks etc complete all as specified and as directed.
Supply and fixing 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste complete all as specified and as directed.
Material and labour for rendering 15 mm thick plaster in CM (1:4) using water proofing compund on one side of lathing finished even and smooth with out using extra cement etc complete all as specified and as directed.NOTE:-WPC will be measured and paid separately.
Material and labour for rendering 12mm thick plaster in CM (1:6) other than fair face side one side of lathing finished even and smooth with out using extra cement etc complete all as specified and as directed.
M&L for Rendering 15mm thick cement plaster in CM (1:6) on brick work/concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM (1:4) on brick work/concrete surfaces finished even and fair with WPC @ 3% by weight of cement content and without using extra cement complete all as specified and directed. NOTE:-WPC will be measured and paid separately.
M&L for Complete removal of existing treatment and applying two coats of oil bound distemper white or tinted on walls over a coat of alkali resistant primer over and including 2mm thick wall care putty etc complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall applying two coats OBD white or tinted on walls over a coat of alkali resistant primer over and including 2 mm thick wall care putty of approved shade all as specified and as directed.
M&L for preparation of old surfaces of walls applying one coat of cement base paint complete all as specified and as directed.
M&L for preparation of new surfaces of walls & applying two coats cement base paint over a coat of primer complete all as specified and directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed.
S&F for Joist,channel ,angle,or tee sections,fixed independently, without connecting plates ,etc (cut to ordinary length ie within 20mm of the length indicated Fe -410-W(Gde-E-250 qaulity-B) etc complete all as specified and as directed.
S&F Plates (plain or chequered) channels,square cut or notched (ordinary and counter shunk forming holes,without any attachement etc complete all as specified and as directed.
S&F Wind ties for roof including securing bolts ,posts and struts including all necessary drilling bolt or riveting etc. and similar work confirming to FE-290 Gde-165 etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile steel sheet 0.50mm (TCT) any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. Profile sheets complete all as specifed in particular specification etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick on ridge any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws etc complete all as specified and as directed.
M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer of any description,over 10cm width or girth,not other wise described etc complete all as specified and as directed.
M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over one coat of pink primer of any description,over 10cm width or girth,not other wise described all etc complete all as specified and as directed.
S&F 16 to 20mm dia Mild steel screws bolts(Machine made)with hexagonal or square heads at one end and screwed both ends ,each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n.exc 15cm long. with washers etc complete all as specified and as directed.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia etc complete all as specified and as directed.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut exc 30cm long and dia 25mm etc complete all as specified and as directed.
M&L for Preparation of old painted surfaces of steel & Iron of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and as directed.
M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 80mm thick Coloured (Yellow & red) interlocking (M-35) cement concrete tiles of approved design & pattern with grey cement and pigment laid over and including 25 mm thick layer of sand cushioning, etc complete all as specified and as directed.
M&L for 25mm Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and as directed.
M & L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate) 100 mm thick as floor finishing cement concrete surface even and smooth without using extra cement including fixing of plastic dividing strips etc complete all as specified and as directed. Note:- plastic dividing strips measured and paid seperetely.
Supply only plastic dividing strips, 1.5mm thick and width 28mm etc complete all as specified and as directed.
M&L for75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed on grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre etc complete all as specified and as directed.
Supply and fix stainless steel wire cloth 0.36 nominal dia of wire and average width apperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutter etc complete all as specified and as directed.
Supply only waterproofing compound etc complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed.
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
M & L for 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards etc complete all as specified and as directed.
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm etc complete all as specified and as directed.
S&F in repairs mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil etc complete all as specified and as directed.
M&L for Plain Cement concrete type B-2, (1:2:4) (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
S&F steel work in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
S&F steel work in pillars trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
M&L for preparation for newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
S&F 300 x 300 x 15mm thick rubber tiles laid over green concrete etc complete all as specified and as directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed.
S&F 4 levers brass mortices lock, vertical type, size 100mm etc complete all as specified and as directed.
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work etc complete all as specified and as directed.
M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil etc complete all as specified and as directed.
M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and well rammed to a true surface etc complete all as specified and as directed.
M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of Soil etc complete all as specified and as directed.
Returning, filling in soil incl watering, well ramming, etc complete all as specified and as directed.
M&L for Toughned glass 10mm thick as in hinged doors, parttitions automatic doors and similar work including cutting to shape, drilling holes required incl handles and connecting fitting complete all as specified and as directed
Removing excavated soil to a dist n.exc.50m and depositing where directed at a level n. exc 1.50m above the starting points etc complete all as specified and as directed.
S&F venetian blinds of approved shade and size, mounted on aluminium rail pannels of size 40mm x 25mm, 100mm wide strips and height as per window, made up of fabric wire cloth, jointed to main panels with pivot 180 degree tiling of strips and sliding arrangement to the length of window etc complete all as specified and as directed
S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufactures etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface etc complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No 96.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
All as per item No 96.00 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed etc complete all as specified and as directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length.
Taking down S&F for , LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed.
M&L in replacement for Decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and as directed.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed. Note : MCB TPN/SPN/SP shall be measured and paid seperately under relevant items.Make : Legrand/Havells/Siemens
Supply and fixing MCB TPN 40-100 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed.
M&L for MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/Havells/Siemens
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make : Legrand/Havells/Siemens
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken etc complete all as specified and as directed.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm etc complete all as specified and as directed.
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing etc complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable.
Material and labour for (concelaed Type) point wiring including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing etc complete all as specified and as directed. Note: A. Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. B. The Rate of point wiring includes the following :- (i) Copper wire (ii) PVC Conduit with accessoreis (iii) Chase cutting (iv) other accessories such as modular GI box, modular inner plate and modular Cover plate etc
(a) One light/fan/Call bell controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 122.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed. Make : Havells/Anchor/Legrand
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.Make : Havells/Anchor/Legrand
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.Make : Havells/Anchor/Legrand
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.Make : Havells/Anchor/Legrand
M&L for sub main wiring (concelaed Type) two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.Make : Havells/RR Kabel/Finolex
M&L for sub main wiring four run 6.0 Sq mm and two run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC conduit pipe /Casing caping complete all as specified and as directed. NOTE:- four runs of 6.0 Sq mm +two run of 6.0 Sq mm and two run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.Make : Havells/RR Kabel/Finolex
Supply and fixing LED luminaire (2' x 2') 600 mm x 600 mm, 40/42 watt, (Warm) AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing for Bed side light 3 Watt LED light reading in bed just got easier with this colletion of adjustable LED bedside lights complete all as specified and as directed. e : Philips Cat Part No 48042/Bajaj/Havells
Supply and fixing for LED 12 watt Picture light/Mirror light complete all as specified and as directed. Make : Philips/Havells/Bajaj
Supply and fixing for 10 Watt LED Spike light suitable for outdoor environment with IP65 that beautify transforms the beauty of your space warm/white complete all as specified and as directed. Make : Philips/Havells/Bajaj
Supply and fixing for Gate light in aluminum die cast with modern artistic design and white PC diffuser for retrofit LED lamps complete all as specified and as directed.Make : Havells/Philips/Bajaj
Supply and fixing for Downlight aluminium power coated ceiling mount complete all as specified and as directed.Make : Havells/Philips/Bajaj
M&L for modular white cover plate with frame 3 module etc complete all as specified and as directed.
M&L for modular white cover plate with frame 6 module etc complete all as specified and as directed.
M&L for modular white cover plate with frame 8 module etc complete all as specified and as directed.
M&L for MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series etc complete all as specified and as directed.
M&L for Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB TP 32 Amps etc complete all as specified and as directed.
Supply and install vertical pack type Tower Air conditioner units indoor/outdoor complete, rating 5 star with cordless remote control and with inbuilt air ioniser and Plasma filter for better indoor air quality with twin rotary compresser three phase units 220 volts to 415 volts 50 Hz of capacity 2.0 TR. Make:- Voltas/ Hitachi/ Blue star/ LG
Rameshwar Prasad
Shri Atoshe Tuccu
VIHUTO YEPTHO
Shri H Kivigho Zhimo
Shri B K Ukil
Ms ARENKOKLA CONTRUCTION
commercial enterprises
M/S SANGITA TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .