PROVN OF VEGETABLE, FRUIT SORTING OUT SHED AND CERTAIN MINOR WORKS AT JANGLOT UNDER GE BASOLI.

Amount

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed.

Removing excavated material (soil) to a distance n exc 50 metres and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and as directed.

M&L Hard core of broken stone or boulders, gauge n exc. 63mm depositing, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 75mm thick using (40mm graded crushed stone Agg) as in sub base , complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 Grade with grey cement and pigment, complete all as specified and as directed.

M&L for cement concrete M-15 Nominal mix in coping benching/PCC drain and the like including weathering ,slightly rounded or chamfered angles as directed including form work and finished all exposed surfaces complete all as specifed and as directed.

Excavation in trenches n.exc 1.5m deep and n exc 1.5 m in width in any type of soil and getting out complete all as specified and as directed.

Returning, filling in, soil including spreading, levelling, watering, and well ramming in layers n.exc 25cm in thickness, complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D-2 (Nominal mix) using 40mm graded crushed stone aggregate in foundation filling and mass concrete, sub base of floor, complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, lintel over span 1.5 mtr etc. complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs, supported on walls beams and columns in floors, roofs, landings, balcony, canopies, deck slabs and in salves and like, complete all as specified and as directed.

Form work to sides and soffits of piller, post, column, floor or roof beams beam launchings, girders, bressumers etc with rough finished, complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs landing and similar works not exc 200mm thick with rough finished, complete all as specified and as directed.

Form work to faces of walls, staircase railing and similar work with rough finished, complete all as specified and as directed.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.

M&L for TMT Bars 6mm dia and over upto and including 10mm dia in stirrups and spacers, complete all as specified and as directed.

M&L for Brick work with old size brick curved or straight on plan exceeding 6m area radius built in CM 1:4 brick crushing strength not less than 75 kg/sqcm, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection finished even and fair without using extra cement floor shall be laid alternate panels inluding necessary form work etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair face of brick work or concrete surfaces, in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surface in CM 1:4 finshed even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surface in CM 1:3 as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame shall be covered with heat moulded wood grain printed 5mm thick PVC sheet x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading with solvent cement for stiles and PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for rail & bottom rail, panelling of wood drained PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement including 100 mm size PTMT hinges, supplying & fixing in the frame at site as per specification & drawing

S&F alumunium anodised barrel tower bolt of extruded section and complete of size 150mm long complete all as specified

S&F aluminium handle cast type anodised of size 150mm complete all as specified

M&L for applying three coats of white wash on walls including preparation of new or untreated surfaces, complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including preparation of new or untreated surfaces, complete all as specified and as directed.

M&L for applying two coats of cement base paint over concrete or newly plastered surface incl preparing of newly plastered surfaces, complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4, complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile, complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x300X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade of tile over and including 10 mm thick cement plaster in C.M 1: 4 , complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges steel peg set stay, complete all as specified and as directed.

S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and as directed.

M&L for painting to new steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint, complete all as specified and as directed.

S&F for 10 ltrs discharge capacity PVC flushing cistern low level ,including 32 mm PVC flush pipe, with inlet ball valve etc , complete all as specified and as directed.

S&F vitreous china squating pan, orissa pattern size 580 x 440mm and making good, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed. Make : Hind ware, Cera, Paryware.

S&F Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore, complete all as specified and as directed.

S&F bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated as complete all as specified and as directed.

S&F 15 mm fancy type chromium plated stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe, complete all as specified and as directed.

S&F steel water tubing medium grade 20mm bore galvanished with all fitting to walls etc. complete all as specified and as directed.

S&F steel water tubing medium grade 15mm bore galvanished with all fitting to walls etc.complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats, (as sample kept in GE Office)complete all as specified and as directed.

M&L for best quality Towel ring of PTMT fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed.

S & F CI sand cast pipe , waste and vent pipe duly BIS marked of approved make in any length with or without ears with cement joint of 75 mm bore fixed in trenches or floor, complete all as specified and as directed.

S & F CI sand cast pipe , waste and vent pipe duly BIS marked of approved make in any length with or without ears with cement joint of 75 mm bore fixed on walls, complete all as specified and as directed.

S & F CI sand cast pipe , waste and vent pipe duly BIS marked of approved make in any length with or without ears with cement joint of 100 mm bore fixed in trenches or floor, complete all as specified and as directed.

S&F CI bends duly BIS marked of approved make of (any radius) with duck’s foot or heel rest of 75 mm bore, complete all as specified and as directed.

S&F CI bends duly BIS marked of approved make of (any radius) with duck’s foot or heel rest of 100 mm bore, complete all as specified and as directed.

S&F branch pieces, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parralel branches 100mm dia with oval access doors.

S&F Cast Iron cowl of 75 mm bore, complete all as specified and as directed.

S&F Cast iron floor trap with grating including jointing to waste pipe fixed with cement concrete type B-1 (1:2:4 ) , 75 mm dia, complete all as specified and as directed.

S&F water tank with rotational moulded polythene water storage tank (cylindrical vertical with closed top) of 500 Ltr capacity hoisted and fixed in position all as specified in SSR Part I.

S&F Gun-metal Globe or gate valves 20 mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed all complete all as specified and as directed.

S&F Ball valve high pressure PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, 20 mm dia, complete all as specified and as directed.

M&L concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe all as specified

M&L Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete including testing all as specified (Concrete to be measured and paid for separately).

Supply only integral water proofing compound, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone agg) as in coping including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified.

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 complete all as specified and directed including necessary form work. Note: Steel reinforcement shall be measured and paid for separately under respective items

M&L for Construction of septic tank with cover slab RCC M-25(Design mix) for 10 users brick work in CM 1:4 (with top of slab at ground level) including necessary excavation and earth work in any type of soil and disposal of surplus soil a directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.

M&L for construction of soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber, brick work in CM, RCC cover slab in M-25/RR masonary/filling with brick bats, complete of size 1.2m dia x 3.0 m deep, all as shown on drawing and as directed.

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bsaes of columns etc basement slabs, under-reamed piles and mass concrete

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in columns, pillars ,piers,posts and struts

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams ,chhaja,cantilevers, bressummers, lintels over 1.5 mtr span

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like.

M&L brick work with sub class "B" bricks, stright or curved on plan exc6m mean radius built in cement mortar 1:6, complete all as specified and as directed.

S&F Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for rough finished flat surfaces of concrete complete all as specified.

M&L Rendering 10mm thick on fair faces of concrete surfaces with 1:3 CM on ceiling surfaces etc., finishing the surfaces even & smooth w/o using extra cement.

M&L for Preparation of new plastered surfaces and applying two coats exterior acrylic emulsion paint (Appx) on walls over a coat of primer complete all as directed.

S&F steel window factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

S&F Pressed steel frame for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate size of frame 125X60mm, complete all as specified and as directed.

PCC 1:3:6 type C-1 using 20 mm graded stone agg as filling in the pressed steel door frames /hold fast complete all as specified.

S&F 35 mm thick plain framed factory made shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed.

S&F Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a), complete all as specified and as directed.

S&F Mild steel barrel tower bolts of stove enamelled black, with bright bolt of size 150mm, complete all as specified and as directed.

S&F Mild steel pressed handles,oval type, stove emameled black of size 125mm, complete all as specified and as directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.

S&F Mild steel sliding door bolts of size300 mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section.

M&L Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.

M&L for cement concrete type B-0 1:2:4 using (12.5 mm graded stone aggregates) 25 mm thick in flooring, complete all as specified and as directed.

M&L for Spreading and levelling in layers n exc. 25 cm thick and watering and well ramming under floor complete all as specified and directed.

M&L Anti-termite treatment to backfilling in contact with foundation at the rate of 7.5 ltr of emulsion per sqm on vertical surface, complete all as specified and as directed.

M&L Anti-termite treatment to the top surface of filled earth at the rate of 5 Ltr per sqm of surface, complete all as specified and as directed.

M&L Anti-termite treatment to the under plinth at the rate of 5 Ltr per sqm of surface, complete all as specified and as directed.

M&L for roof treatment with the following specicification - (a)20mm thick rendering in CM 1:4 with WPC @3% by weight of cement (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (e) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with granular finish. The overlap shall be minimum 150mm on transverse direction and 100mm on longitudinal direction and sealing overlap by torch application .

M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of average thickness 50mm in two layers with chicken mesh in between the layers, top surface of plain concrete padding shall be finished even & smooth w/o using extra cement (wire net shall be measured and paid separately)

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4, all complete and as specified.

S&F water tank with rotational moulded polythene water storage tank (cylindrical vertical with closed top) of 1000 Ltr capacity hoisted and fixed in position with 20mm PTMT ball valve all as specified in SSR Part I.

S&F Gun-metal Globe or gate valves 20 mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed all complete all as specified and as directed.

S&F 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type, complete all as specified and as directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 95 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 95 but for one 3 pin 5 Amp socket outlet on same board.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified. .

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type. Make :-SSK/Anchor/Bajaj

Supplying & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as specified and directed. Make:- SSK/Anchor/Bajaj

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed. Make :-SSK/Anchor/Bajaj

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and as directed.

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F in replacement LED tube light fitting 1x20w,230v Industrial box tpye, including LED tube rod with polycarbonate diffuser , 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F LED bulkhead fittings luminaires with opel diffuser including( LED lamp type 10 W LED 6000K) lamp holder etc, complete all as specified and as directed. Make Philiphs/ Havells/ CG/Halonix.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral SPN 8 VTPN way having provision of one number incomming MCB DP and outgoing MCB,s SP AC 230V, 50Hz AC supply having protection IP 43, IK-09 with copper bus bar rated 200 Amps, neutral link, earth bar complete all as specified.

S&F MCB SPN 32 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F MCB SP 6 to 32 Amps with 10 KA Breakiing capacity of C series in distribution boards all as specified and dirrected.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service valu 6.00 BEE. Five Star rated with brushless direct current motor (BLDC) all as specified and directed.

S&F metal body exhaust fan 300mm sweep, 230 V, single phase including fixing in position and making connections, complete all as specified.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 16 sqmm 4core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area are as under of Make- polycab/KEI/RPG

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed. Make -Trupati /Equivalent

Supply and laying in trenches GI tube medium grade 40mm bore with all fittings, complete all as specified and as directed.

Supply and laying in trenches GI tube medium grade 25mm bore with all fittings, complete all as specified and as directed.

Cutting and screwing existing steel tubing 40/50mm for alteration / additions in positions without taking down including insertion of GI Tee to provide new connection, complete all as specified and as directed.

S&F Gun metal Gate valve 25mm dia confirming ti IS with iron wheel head screwed both ends for Irin pipe, complete all as specified and directed.

Ashoka Engineers

M/s. Jaswant Singh Govt Contractor

MANOTRA BUILDER

Standard engineers