WCD@SC

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete, for Ordinary Soil-Manual Means-Upto 3 m depth.

Plain cement concrete (1:4:8) using 40mm metal with concrete mixing upto plinth level nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement sand coarse aggregate, water etc.,to site including seigniorage charges countryes & other taxes on all materials all operational incidental and labour charges such as mixing laying and ramming concrete in layers in position not exceeding 15cm finishing top surface (APSS No.402)

Supply and filling of gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges, and contractors profit & over heads but excluding seignorage charges and GST etc., complete.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and labour charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Columns Footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and labour charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Columns Plinth Beam

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and labour charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Columns

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and labour charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, Roof Slab 100mm thick

Plain cement concrete Grave M 20mm nominal mix using with 12mm, 6mm size graded machine crushed hard granite metal (coarse aggregate) approved quarry including cost and conveyance of all materials like cement sand coarse aggregate, water etc.,to site including seigniorage charges countryes & other taxes on all materials all operational incidental and labour charges such as mixing laying and ramming concrete in layers in position not exceeding 15cm finishing top surface (APSS No.402)

Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted Trap machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate coarse aggregate, water etc., to site and cost of all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc complete but excluding cost of steel and it’s fabrication charges for finished item of work but excluding seigniorage charges (APSS No. 402 & 403) For foundation, plinth, pedastals(below plinth)

Plain cement concrete (M15) rodinary grave (1:2.5:5) using 40,20 & 10mm metal with concrete mixture including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.,

Providing thremo mechanically treated (TMT)/(HYSD) reinforcement (Fe 500/550D grade as per IS 1786-2008) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including soverhead charges & Contractors profit but exlcuding GST and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Providing Brick work of 230mm thick in CM (1:6) prop using second class kiln burnt clay bricks of class as per Table-I of IS:1077-1992, Non-Modular or traditional including cost and conveyance of all materials and labour charges, centering & scafolding charges etc., completed APSS No.501

Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding VAT and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls.(50% Natural Sand+50% Manufactured Sand)

Supplying and fixing stainless steel hand railing, balustrade etc using 304 grade stainless steel pipes of 50 mm dia 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding drilling of 25mm dia holes with pneumatic

Supply and fixing of Door of WPC single shutter made with flush door of size 0.9x1.9 mts including fixing of 6 Nos of MS Hold fasts, 6 Nos of 125mm long stainless steel (PC) Butt Hinges, 2 Nos of 200mm long stainless steel tower bolts 2 Nos of 150mm long stainless steel Door

Supply and fixing of with of WPC single shutter made with flush door of size 0.75x1.9 mts including fixing of 6 Nos of MS Hold fasts, 6 Nos of 125mm long stainless steel (PC) Butt Hinges, 2 Nos of 200mm long stainless steel tower bolts 2 Nos of 150mm long stainless steel Door

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop.20mm thick mixed with water proofing compound at 1 Kg per one bag of cement, laid over roof slab when it is green, including cost and conveyance of all ma

Providing mild steel flats and bars for fabricating steel works like window grills, compound walls grills, Iron Doors, windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work

Supply and fixing of 2 track sliding window with aluminium frame of section 87x45x1.8 mm thickness stainless steel fly proof wire mesh of not less than 20 guage including cost and conveyance of all materials to work site and fixing in position etc., complete

Painting and lettering to name board with approved synthetic enamel paint including all charges

Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FR / FRLS PVC insulated flexible ISI mark copper cable ( 100V grade as perIS:694/1990 ) of KEI / Polycab / Havells / GM / Million / HPL / Gold Medal / Power Flex / RPG / Anchor / Great White / Sun Cab / Fortune Art make in existing pipe with 6A 1 Way flush type Swich of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega, Ceiling rose 3 Plate of makes Anchor / Gold Medal Olive / Million Zoom. and Supply of Decolam Board of Size 8" x 10" as switch control box including cost and conveyance of all material and all labour charges etc., complete for light, bell, fan and exhaust fan points including cost and conveyance of all material and labour charges .

Supply and fixing of 16A 3 pin and 6A 3pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6"x8"x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete

Supply of 2 run 2.5 sqmm WPSC (Weather Proof Single Core) ISI aluninium wire of make finolex/GM/Million/V-Guard/Payal/Nakoda/Gold Medal/HPL/RPG along with NO 10 SG GI bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains

Supply and Fixing and transportation of 20W+/10%,>/, 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per ISspecifications, minimum CRI>/80,.etc complete with 5 years warranty with BIs Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply, Transportation and fixing of 1200mm (48") sweep ISI mark ceiling fan as per IS 374-1979 and with double ball bearings but without regulator of makes crompton/bajaj kassels 50/usha atom make with all standard accessories but without regulator including all labour charges etc.,

Supplying and fixing of SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 110mm dia

Supplying and fixing of SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 160mm dia

Supplying and fixing of SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 75mm dia

Supply and Fixing of CPVC Pipes ( 28.60mm OD Pipe - SDR 13.5 )and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard including cost and conveyance of all material, labour charges, and over heads but excuding VAT.

Supply and Fixing of CPVC Pipes ( 22.20mm OD Pipe - SDR 13.5 )and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard including cost and conveyance of all material, labour charges, and over heads but excuding VAT.

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks

Supply and fixing of 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including cost and conveyance of all materials and labour charges etc., complete for All Floors. including cost and conveyance of all materials and all incidental and operational, labour charges, lift charges, but excluding seignorage charges and VAT etc., complete for finished item of work. (A.P.S.S. No. 1325).

Supplying and fixing single bowl stainless steel sink size 24"x18"x8" (609.6x457.2x203.2mm) 1mm thick with accessories 1st quality