Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹38.3 L+₹55,356.38 (1.47%)Rejected-Finance SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹43.1 L+₹5.4 L (14.2%)Rejected-Finance | L3 | Rejected-Finance Not L1 |
Tender Value
Refer Docs
EMD Value
₹77,000
Closing Date
11 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(South) Bangalore
GE(South) Bangalore
ADDITIONAL ALTERATION TO BLDG NO P-43 AT RMS BENGALURU UNDER GE(SOUTH) BANGALORE.
2022_MES_557756_1
8639/E8
Open Tender
Civil Works
Item Rate
180 days
Bangalore
As per tender document
6 documents required · 6 mandatory
₹500
GE(South) Bangalore
₹77,000
Yes
14 Dec 2022
14 Oct 2022
14 Nov 2022
14 Oct 2022
11 Nov 2022
28 Oct 2022
Amount
Taking down Chowkhats or frames exc. 1.5 sq. m but n. exc 4 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified & directed by Engineer-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints with grooves on both sides for fixing panelled shutter and wire mesh door shutter complete all as specified and directed by Engineer-in-Charge.
S&F 40 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, both sides is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
Forming Jambs, etc to openings (to foregoing items), including cutting, toothing and properly bonding in old work also facing jointing and pointing to match existing work in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge.
Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismantled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required complete all as specified and as directed.
S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and as directed.
S&F Stainless steel mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanized wire staples fixing ‘in repair’ complete all as specified and as directed.
M & L for second class hardwood Plain scantling, fillets exc 13 sqcm and n.exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.
S & F for 18/ 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative type with screws confirming to IS 12823-1990 complete all as specified and as directed.
S & F 200mm size MS barrel tower bolts ostove enamelled black complete all as specified and as directed.
S & F 150mm size Mild steel pressed handles, oval type, stove enamelled complete all as specified and as directed.
S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.
S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified and as directed.
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
BLANK
S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified and as directed.
S&F 4.00 mm thick sheet glass and glazing with aluminium beading & rubber gasket in square n exc 0.50 sqm in each panes complete all as specified and as directed.
S&F 4 mm thick figured glass pin headed type with aluminium beading & rubber gasket in square in each panes complete all as specified & directed.
M&L for preparation old steel surfaces exceeding 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.
M & L for Providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in Cement mortar 1:6, complete, in walls complete all as specified and as directed.
Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc including removing the debris out side the MD land complete all as specified and as directed.
M&L rendering 5mm thick in CM (1 :4) with WPC of 3% over 10 mm thick CM (1:6) on fair faces of brick work or concrete surfaces finshed even and smooth without using extra cement complete all as specified and as directed.
Supply only Integral water proofing compound complete all as specified and as directed.
M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and directed.
M & L for applying two coats of oil bound distemper on newly plastered wall surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .
M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M & L for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L preparation of old distempered surfaces of walls and applying two coat of Oil bound distemper over and including a coat of 1mm wall care of putty complete all as specified and as directed.
Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.
S&F non-skid coloured ceramic tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and included screed of 15mm thick in CM 1:6 etc complete all as specified and as directed..
S&F coloured glazed ceramic tile digital series in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick CM 1:4 backing coat complete all as specified and as directed.
M&L for 20 mm thick Granite Telephonic black including round cutting work for wash hand basin / sink (table rubbed and polished) as in cooking platforms , steps, jambs, pillars, window cills, and like in 10 mm thick cement mortar (1:6) incl pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite and like complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.
S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (concealed type) complete all as specified and as directed.
S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.
S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.
S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.
S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.
S&F PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC complete all as specified.
S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.
S&F vitreous china, oval shaped low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specifed and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make: parryware/hindware/prayag)
S&F vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make of Cera or Equivalent in parryware/hindware)
S&F waste pipe for WHB complete all as specified and as directed
S&F brass CP 15 mm bore two way bib cock, quarter turn with wall flange and aerator, complete all as specified and as directed.
S&F 75mm dia PVC (SWR) floor/Nahani trap, plain with SS grating including solvent cement complete all as specified and as directed.
S&F Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm bore pipe all as specified.
S&F 15mm dia fancy type chromium plated angle valve screwed both end for iron pipe or for unions , high pressure with long shank & cup (concealed type) having crutch handle complete all as specified and as directed by Engineer-in-Charge.
S & F PVC connections 15mm size with PTMT nuts of length 450mm all as specified.
S&F bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed.
S&F SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S&F tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.
S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.
S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.
S&F PVC bends any radius 75mm dia complete all as specified and as directed.
S&F PVC bends any radius 110mm dia complete all as specified and as directed.
S&F PVC bends any radius 110 mm dia with access door complete all as specified and as directed.
S&F PVC bends any radius 75 mm dia with access door complete all as specified and as directed.
S&F PVC Single T any radius 110 mm dia with access door complete all as specified and as directed.
S&F PVC (SWR) 75 mm vent cowl complete all as specified and as directed.
S&F PVC (SWR) 110 mm vent cowl complete all as specified and as directed.
Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area not exc 150 Sqcm complete all as specified and as dircted.
M & L 75 mm thick PCC (1:3:6) type C1 using as in plinth protections with joint cutting and joint filling with Bitumen grade 'B' etc complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)
S&F Factory Made Solid PVC Moulded Door Shutter, With Particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S & F aluminium anodised alloy barrel tower bolt 200mm size complete all as specified and as directed.
S & F extruded aluminium alloy handles, fabricated type anodised 150mm size complete all as specified and as directed.
S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth; for foundation etc & getting out in hard/dense soil complete all as specified and as directed.
M&L cement concrete 1:4:8 type E2 using 40mm graded stone aggregate as in foundation, filing & mass concrete complete all as specified and as directed.
M&L formwork to sides and soffits of lintel beams rough finished complete all as specified.
M&L for RCC 1:2:4 type B-1 (Nominal mix) as in plinth beam, lintle band and lintles over 1.5M complete all as specified.
M&L for RCC 1:2:4 type B-1 (Nominal mix) (using 20mm graded stone aggregate) as in roof beam, complete all as specified.
M&L formwork to edges of concrete flat, treads RCC/PCC band etc. exceeding 10cm but not exc. 20cm wide complete all as specified.
M&L form work to sides of roof beam etc complete all as specified.
M&L RCC 1:2:4 type B-1 (Nominal mix) as in slabs, suported on walls, complete all as specified.
M&L formwork to soffits of suspended slab such as roof slabs, complete all as specified.
M & L Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
All as per item no 89 above but 10mm dia complete all as specified and as directed.
M&L Rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.
M&L for preparing new plastered surfaces of any description and applying two coats of cement base paint over a coat of alkali resistant priming paint etc complete all as specified.
Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of CPVC Brass Elbow 20mm dia
Supplying and laying of CPVC Brass Tee 20mm dia
Supplying and laying of CPVC Union 20mm dia
Supplying and laying of CPVC ball valve 20mm dia
Supplying and laying of CPVC reducer brass tee 20mm dia
Supplying and laying of CPVC Tank adaptor 20mm dia
S& F in repairs of gun matel gate valve 20mm bore of with iron wheel head for iron pipe and fixed complete all as specified.
S&F of 75mm bore PVC (SWR) waste and vent pipes in any length with rubber ring joints with laid in floors complete all as specified.
M & L Hardcore of gauge n.exc 63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified.
M&L 75 mm thick cement concrete 1:4:8 type D-2 as in sub base etc complete all as specified.
40 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra cement.
Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25 cm thick in soft/loose soil, complete all as specified.
Removing excavated material not exceeding 50m & depositing where directed at a level not exceeding 1.5m above the staring point complete all as specified.
S & F Rotational moulded polyethylene water storage tanks 5000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F anodised aluminium frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified.
S & F anodised aluminium window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron) , sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, roller ,locking arrangements etc. complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M&L point wiring with1. 5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC casing capping incl modular type steel sheet pressed terminal box (surface mounted ) with 2mm hylium thick sheet incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire .
(a) One light point controlled by one switch
(b) One fan point controlled by one switch
(c) One socket oulet 5Amps on same board
(d) One socket oulet 5Amps on indepndent board
All as per item No 112 here in before but for socket outlet 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 4 sqmm. Make- Polycab/Finolex/Havells
S&F Modular Switch 1 way 6 Amps 1 Mopdule Make : Anchor /Havells/ Kinjal.
S&F Modular Socket 16 Amps 2/3 pin combined 2 Module Make : Anchor /Havells/ Kinjal.
S&F Fan Regulator step type 120W all as specified and as directed.
S&F metal flush box 1 Module all as specified and as directed.
S&F metal flush box 3 Module all as specified and as directed.
S&F metal flush box 4 Module all as specified and as directed.
S&F metal flush box 5 Module all as specified and as directed.
S&F metal flush box 6 Module all as specified and as directed.
S&F white cover plate with frame 1 Module all as specified and as directed.
S&F white cover plate with frame 3 Module all as specified and as directed.
S&F white cover plate with frame 4 Module all as specified and as directed.
S&F white cover plate with frame 5 Module all as specified and as directed.
S&F white cover plate with frame 6 Module all as specified and as directed.
S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block all as specified and as directed.
M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
M & L for sub main wiring (surface) complete with Two single core 06 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable & one single core of 4mm FRLS PVC insulated (drawn through in and including 20 mm dia PVC conduit pipe accessories including elbow , tee )one single run of 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as specified and directed by EIC. Make- Polycab/Finolex/Anchor
S&F Sheet metal enclosure TPN for DB's when MCB's to be used with 200 amps bus bar double door 4 way all as specified and as directed.
S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 8 way all as specified and as directed.
S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 4 way all as specified and as directed.
S&F MCB TPN 63Amp all as specified and as directed.
S&F MCB SPN 63 Amp all as specified and as directed.
S&F MCB DP 32Amps all as specified and as directed.
S&F MCB SP 5 to 20Amps all as specified and as directed.
M & L Earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.
S&F Bed lamp for mounting accent luminarie with extruded chrome body Rotational 90 degree angle adjustment light fititng round type incl LED Bulb 7Watt warm colour 385 Lumen Make- Philips cat part No 581919 or equivalent of WIPRO/ Panasonic
Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 24 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. Make- Bajaj cat part No-BCLSB 20 WH or equivalant of Wipro/Philips
Supply and fixing LED recess mounting 2x2 fittings full fit luminarie with glare free uniform illumination with longer life and less maintainance 36 Watt Make- Bajaj cat part No BZRSQL 36W GZiWH or equivalent of Wipro/Philips
Supply and fix of ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM1200,340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one deposit to AGE E/M Store yard complete. Make - Bajaj Kassels 50 ISI Product code 250468 or equivalent make of Havells/CG
10 .Supply and PVC Body sound proof Exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall or exsinting windo grill cutting and 12mm plywood suitable size of exaust fan make hole and fixing the window nutr bolt washers and after finishing work distrubed surface of wall complete all as specified and directed by Engr-in - Charge Make- Bajaj Product code 70049 or equivalant to Havells/CGUsha /Baja/CG
Supply and fix water heater storage type electric capacity 25 ltrs, BEE 5 star rated and pre-wired and including connecting up with three core copper conductor cable with 15Amps plug top including dismatling old one deposit to AGE E/M Store yard complete. (Make - Bajaj Calenta Product code 150801 or equivalent make of Crompton/Havells)
Excavation in trenches in soft loose soil not exceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables and LT Panel board foundation etc and getting out complete all as specified and as directed.
Taking up cast iron water mains including all fittings, with spigot and socket ends and lead joints including burning out joints of size of 80 mm dia.
Dismantling the existing unserviceable GI tubing complete and S & L new GI tubing medium grade galvanised with all fitting laid in trenches/wall all as directed of following sizes of make Appollo/ Jindal/Prakash
(a) Bore of pipe 20 mm
(b) Bore of pipe 25 mm
(c) Bore of pipe 80 mm
S & F gun metal gate valve in repairs with inner wheel head, screwed both ends in iron pipe and fixed in the following sizes of make Neta/Zolota/Leader
(a) 20 mm dia
(b) 25 mm dia
(c) 80 mm dia
S&F float valves complete brass fitting with rod and plastic ball of the following sizes
(a) 20 mm dia
M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness.
Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium sonductor of size 35 Sqmm x 3.5 Core including taking down unserviceable UG cable complete all as specified and directed. (Make- Plaza/ Havells/ Finolex)
All as per Item No 151 but of size 25 Sqmm x 3.5 Core
supply,installation,testing and commisioning factory made,CPRI Approved LT Panel board outdoor type, of size not less than 900xpowder coated made of 2.0mm thick CRCA Sheet,weather and vermin proof with double stud hinged door front and back open with internally locking arrangement and externally locking arrangement with drop bolt,shutter type windows at both sides of top and bottom duly internally secured with wire mesh,GI earthing strip stud at both bottom side,removable gland plate with compartmentalised cubical with 1.6mm thick CRCA sheet front opened double stud hinged door, all switch gears and changeover switch suitable to accomadate comprising of the following:
Incoming
(i) MCCB 100 amps,35kA, 415 Volt,50Hz, 4P With thermal based release-1no. (Make Indoasian /Hvaless/Legrand
(iv) LED cluster indication lamp(R Y B) set of 3-1set
Busbar : Copper busbar 3 phase 4 wire of 400 to 630 Amps supported with ebonite insulation at 20cm interval -1set
Outgoing
(i) MCCB 63 amps,35KA, 415 Volt,50Hz, 3P With thermal magnetic release - 02 Nos. (Make- Indoasian/havells/Legrand
M & L for Concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, complete all as specified and directed.
M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.
M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:4
M&L providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, setting in cement mortar 1:4 complete all as specified and directed.
M&L for PCC (1:2:4) type B1 in surface channels and drains complete all as specified and directed by Engineer-in-Charge.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends etc
M&L providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs setting with cement mortar 1:6 complete all as specified and directed.
B5BUILDING SOLUTIONS
Varsha Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .