CONSTRUCTION / EXTENSION OF A ROOM OF THE RABBIT HOUSE, AT RABBIT FARM, INSTITUTE OF VETERINARY BIOLOGICAL CAMPUS, KHANAPARA, GUWAHATI-22 IN KAMRUP(M) DIST. UNDER SOPD-G SCHEME.

2.8 :- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual mean foundation or drains (not exceeding 1.5m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. 2.8.1 : All kinds of soil

4.1 :- Providing and laying in position cement concrete of specified Grade excluding cost of centering and shuttering all works upto plinth level. 4.1.3 : 1:2:4 (1 cement : 2 coarse sand (Zone – III) derived from Natural source : 4 graded stone aggregate 20mm nominal size derived from natural source

5.2 :- Reinforced cement concrete in walls (any thickness) including attached plasters, buttresses, plinth and string courses, filters, columns, pillars, piers, abutments, posts and struts etc. above plinth upto floor five level excluding the cost of centering, huttering, finishing and reinforcement. 5.2.2 : 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived

6.1 :- Brick wall with common burnt clay modular bricks of class Designation 7.5 in foundation and plinth in. 6.1.1 : Cement mortar 1:4 (1 cement : 4 sand)

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS 2222 in superstructiure above plinth level up to 1st floor levelin cement mortar 1:6 ( 1 cement : 6 coarse sand)

Brick on edge flooring with bricks of class designation 7.5 on bed of 12mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks.

4.10 :- Providing and laying damp proof course with cement concrete in prop, 1:2:4 (1 cement : 2 coarse sand (Zone – II) derived from natural source : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources)

5.9 :- Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.1: Foundation, footings, bases of column etc. for mass concrete.

5.9 :- Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.5 : Lintel, Plinth beam, girders, bressumers and cantilever

5.9 :- Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.6 : Column, Pillars, peirs, abutments posts and struts

5.9 :- Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proofing ply 12mm thick.

5.22 :- Steel reinforcement for RCC work including straightening, cutting, bending, placing in position binding all complete upto plinth level. 5.22 A.6 : Thermo Mechanically treated

15mm cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with afloating coat of neat cement on the rough side of single or half brick

62 mm thick cement concrete flooring with concrete hardner topping under layer 50mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1;@ (1 cement hardener mix : 2 graded stone sgg. 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacture specification.

Cement plaster skirting up to 30cm hright, with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete. 12.24.1Natural colour insulating board. 12.24.1.1:- 12mm thick

Structural steel works riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L. hooks, bolts and nuts8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete.12.1.3:- 0.63mm thick with zinc coating not less than 275 gm/m2

Providing and fixing pressed steel door frames conforming to IS : 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Enguneer-in- charge.

Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick for windows etc. including 62x19 mm beadinf of II nd class teak wood and priming coat with approved steel primer all complete.

Applying one coat of water thinable cement primer of approved brand manufacture on wall surface

Finishing walls with water proofing cement paint of required shade.

Finishing with Deluxe Multi surface paint system for interior and exterior using primer as per manufactures specification. 13.48.3:- Painting Steel work with Deluxe Multi surface paint to give an even shade. Two or more coat applied @ 0.90ltr/10 sqm over an under coat of primer applied @ 0.80ltr/10sqm of approved brand and manufacture.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

13.50.3:- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

13.50.1:- With ready mixed pink or Grey primer of approved brand and manufacture on wood works

Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make , in all colour s and shades---------------etc. complete. 11.41A.3:- glazed Vitrified tules Matt/Antiskid finish of size 11.41A.3.5:- Size of Tile 1200x1200mm

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete

Supplying and fitting fixing of Cage for Rabbit made of GI wire. (LS Rs. 50000)

18.50:- Providing and fixing C.P. brass long bib cock of approved quality conforming to IS : 8931. 18.50.1 : 15mm nominal bore

18.52:- Providing and fixing C.P. brass stop cock of standard design and approved quality conforming to IS : 8931. 18.52.1 : 15mm nominal bore

18.7:- Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step COVC solvent cement and testing of joints complete.Internal work – Exposed on wall 18.7.1 : 15mm nominal dia pipes

18.9:- Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step COVC solvent cement and testing of joints complete. External work 18.9.3 : 25mm nominal dia pipes

18.9:- Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step COVC solvent cement and testing of joints complete. External work 18.9.4 : 32mm nominal dia pipes

18.9:- Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step COVC solvent cement and testing of joints complete. External work 18.9.5 : 40mm nominal dia pipes

Please Enable Macros to View BoQ information