Upgradation and Modernization, Face Uplift, Internal Re-arrangement, Waterproofing, Plumbing Work for Existing VIP Guest House-I at JNPA

Amount

CIVIL WORKS

DISMENTALING

Dismantling and lowering down the debris generated from breaking of brick masonry / walls of any thickness at ground and first floor, stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.

Removing of existing Doors with door frame, windows , mild steel grill, railing, Ventilators, shaft door, false ceiling, partitions , etc as per Direction Engineer incharge and proposed Drawings, item includes lowering down debris at designated marked place which is surrounding covered with green hassian cloth , re usable scrap items to be kept at one place as per instructions engineer in charge.

Dismentaling of any kind of flooring / dado (Vitrified , mosaic, marble , granite wooden, linoleum, etc.) including mortor, stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.

Removing of existing wall plaster and stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.

Breaking of RCC / PCC / Brickbat / coba etc. as per proposed drawing with manual breaker and stacking the debris at designated area with in work premises. Contractor to use support props for beam and surround area before starting any breaking activities.stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.

Breaking of RCC as per proposed drawing with Diamond precision cutting, hammer breaker and stacking the debris at designated area with in work premises.Contractor to use support props for beam and surround area before starting any breaking activities.stacking generated debris at designated place upto 15 meter from the work premises, contractor has to created space to collect the debris for further disposal, area should be covered with green hassian cloth, item completes as per direction engineer in charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 10 metres lead.Contractor to use support props for beam and surround area before starting any breaking activities

Providing & Fixing of Temporary Barricading Work site and creating separate access for Guest House using mild steel frame and Colour galvanized sheets and hassian Cloth as per approved Plan, Contractor has to remove and handover used material to JNPA with inventory , item complete as per direction engineer incharge.

Pest control : Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313(Part-Ill) by purching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by fillingputty etc. complete.

Carting away of debris from work premises to dumping area with tractor trolley as directed by engineer in charge .

Structural Audit of building from certified structural consultant for building demolition and proposed structrual changes.

EXCAVATION AND FILLING

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreadingas directed,dewatering ,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means

Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter upto 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc. complete.

RCC Work

Providing and laying cast in situ / Ready mix cement concrete of M-15 Grade trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying / pumping, compacting roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum type mixer / Concrete batch mix plant (Pan Mixer) etc. complete with fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finishis to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsorasdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimumthicknesstogiveasmoothandevensurfaceorrougheningifspecialfinishistobeprovidedandcuringetc.complete,(Excludingreinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite / quartzite /gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork ,cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Corrosion Resistant Steel )

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Resistant Steel For Lintel & Copping)

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneissmetal for bed blocks, foundation blocks and such other items including bailing out water,Steel centering, formwork, laying/pumping, compacting, roughening them if special finishis to be provided, finishing unevenandh one combed surface and curing etc.complete.The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

BRICK WORK

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

Providing stone masonry work in cement mortar1:3 infoundation with watering complete as per drawings and technical specifications etc. complete. (random rubble masonry)

PLASTER & WATERPROOFING

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providinginternalcementplaster6mmthickinasinglecoatincementmortar1:4withoutneerufinishtoconcrete surface in all positions including scaffolding and curing etc. complete.

Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge)

Providing water proof bedding for flooring of Toilet 25 -35 mm thick in C.M. 1:3 including using approved water proofing compound of Sunanda / Pidilite / Kerakol or equivalent in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering etc. complete.

Providing waterproofing in Toilets including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing and laying water proofing treatment to terrace slab with Nnilobit,Dr.fixit or equivalent mm thick APP modified bitumen membrance with polyster reinforcement with over lapping of 75 mm along length and lOO mm along width including removing the existing tarfelt treatment particles including applying bitumne based primer at 0.20 litr/sm and laying 3 mm thick APP modified bitumen membrane coating with torching method and finishing the surface with heat reflective bitumen based silver paint at 0.10 Ltrs/Sq.M. etc complete as per manufacturer specification and as directed by the Engineer in charge. ( With 7 years guarantee period )

EXTERIOR ELEVATION

P&F ACP Cladding : Designing, providing, fabricating and installing Aluminium Composite panels cladding system on exterior façade (inclusive of exterior 3-6mm panels of 600 x 1200 or approved size) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), hot dip galvanized / non ferrous metal anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent approved). Work to include preparing and finishing of junctions with concrete, masonry, aluminum including us of flashing if any as approved by the Engineer in charge etc. all complete. Rate includes removing existing cladding material stacking the same at JNPT Store yard as directed by engineer in charge.

Providing and fixing metal Baffel panels powdercoating finished are fixed on to 50-100 x 25 -50mm deep (or as per approved shop Drawing) of galvanized steel with cut-outs to hold the panels in customize module. Carriers are suspended from the roof by 4mm dia. Galvanized steel rod hanger with special Hight adjustment spring steel suspension clip at max. 1mtr. C/C. Hangers are fixed to the roof by ceiling bracket. work will be done as per approved Design & Drawing or Direction by Engineer In-Charge.

Providing and fixing of Exterior grade Corian cladding to columns / wall etc as per approved design and drawing , finxing of corianto be done with required necessary framing and supports and all lead & Lifts , item to complete jointing the sheet as per OEM menthod and buffing for fine finishing of material to make it look like joint joint free surface, item to complete as per detail design and as per Direction by Engineer In-Charge. Make Durlax, Dupont or equivalent.

providing & fixing Spider Entrance canopy of Dorma make spider & Other hardware fixed on 250x250x8mm box section vertical and horizontal 200x100x8mm & supports 100x50x4mm box section duly one coat of red oxide and 2 coat of approved colour epoxy paint on it full welding with ms routel installation for ss spider 4way and 2 way as per the requirement glass shall be 6mm clear + 1.52 pvb +6mm clear glass both glass shall be toughened and ms tie rod shall be installed as per the requirement and complete installation of canopy and slope shall be towards front area as per approved drawing and design and as directed by engineer in charge

Providing and Fixing Structural Glazing : Designing, providing, fabricating and installing Structural glazing system (inclusive of vision, spandrel and openable panels) with back structure framing arrangement, as per approved design (based on concept architectural elevation drawings), Anodised Aluminium members like muliions, etc. in approved shade, including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal.anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent pproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of dorma or equivalent and Glass of Saint Gobain or equivalent) Rate includes removing existing shutters stacking the same at JNPT Store yard as directed by engineer incharge

Providing and Fixing of Laminated Glass Panelling , Partition as per detail design and drawing, Glass to be fixed on surcface with heavy duty fixtures of dorma or equivalent make , Glass overall thickness 13.5 includine laminated PVB Film or Direction by Engineer In-Charge.

MS FABRICATION

Providing and fixing mild steel grill gate as per the detailed drawing including hinges ,locking arrangements and painting in three coats of oil paint of approved colour and shade etc.complete.(weight18Kilogram. to 20 Kilogram. Per Sq.m.)Spec.Number: As directed by Engineer- in-charge.

Providing and fixing 900 mm highS.S.304GradeStainlesssteelrailingwith40mmdiameterand1.5mmthickattop,40mmdiameterand1.5mmthickverticalsupportsspacedat1.5mcentertocenterand8mmthicktoughenedglassincludingfabricating,fixtures,errecting,necessarywelding,grinding,finishing, buffing to stainless steel pipe etc. complete

Providing and fixing Glass Railing : 0.9 to 1.1 mt high: Designing, providing, fabricating and installing glass railing as per approved design (based on concept architectural elevation drawings), including required stainless steel fitting and fixtures, required hot dip galvanised / non ferrous metal anchor fasteners, jointing and sealing with approved compatible silicon sealant (Dow Corning or equivalent pproved), required fire stop, sheaves. Work to include preparing and finishing of junctions with concrete, masonry, aluminium including use of flashing if any as approved by the Engineer in charge etc. all complete.( all fittings of Hafele or equivalent and Glass of Saint Gobain or equivalent) or as directed by engineer incharge.

Railing with Glass for Wooden Deck - Providing and fixing designer railing at deck area, item includes SS rail and baluster with Structural Support having Glass for clear vision, Complete as per detail design and instruction engieer in charge.

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel handrailing inS.S.304 Grade including fabricating, fixtures, errecting, necessary welding ,grinding, finishing, buffing to stainless steel pipe etc. Complete

PLUMBING

Internal Water Supply System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work

40 mm nominal outer dia Pipes

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : -b 20 mm nominal bore

Supply Installation Testing & Commissuioning of Air Valve 25 NB at terrace with ball valve as per Site Requiremnt or as per Direction by Engineer In Chargwe.

CP & Sanitary Fixtures

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

C.P.sink mixer Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make)

Providing and fixing C.P.wall mixer with provision for overhead shower with115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete.

Providing and Fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.

Providing and Fixing, testing and commissioning of C.P Copper connection S S Braided Flexible 375 mm long including nuts and washers and making connection to fixtures and fittings complete as required.

Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge.

Providing and fixing Soap Dispenser : with glass bottle of approved jaguar or equivalent make etc. Complete

P&F Towel ring : Providing and fixing Towel ring round flange of approved jaguar or equivalent make etc. complete.

P&F Towel Rack : Providing and fixing Towel rack 24" length with flange stealth series ivory gold of approved make and or equivalent as per Architecual drawing and directed by Engineer In charge etc. complete.

Provding and fixing Steel High Speed Hand Dryer Supplying of Touch free stainless steel hand dryer Hand Dry Time : Less than 20 Seconds Motor : Brush Type, Dual Ball Bearings Protection Class: IPX1Blowing Volume : > 270 m3/ Air Speed : 95 m/s Basic Rate 15000/-

Providing and Fixing of Toilet Paper Holder in chromium plated finish as per approved sample Basic rate of Rs. 1000/-

Providing and fixing in position robe hooks in toilets as per approved sample basic rate of rs. 600/-

Urinals : Providing and fixing white glazed wall mounted earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes chrome finished push valve type tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, chromium plated bottle trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Make - Roca or equivalent.

Providing, fixing, testing and commissioning urinals sensor of approved make, sealing of joints, testing etc. complete ,HINDWARE URINALS BATTERY SENSOR FLUSER-500964

Providing and Fixing of Urinal Partition (900*450) 18mm HPL White SS 304, 6 Brackets Use accessories-Merino Make SS 304 grade Right angle Brackets 304 G ,PVC Wall Plugs as per approve Design and drawing.- Basic Rate - 6500/-

Providing and Fixing Wash Basin : Providing and fixing "Hindware" or equivalent make Wash Hand Basin of Italian pattern and style of Olivia or similar series or fonte series, having star white as per Architecual drawing and directed by the Engineer-in charge etc. complete.

Providing and Fixing Pillar Basin Mixer : PILLER BASIN MIXER of push tap/ Hands free with sensor of approved Roca make or equivalent make including necessary socket/union etc. complete as directed.

Bottle Trap : P/F Bottle trap for wash basin

Providing and fixing Concealed Stop Cock : Supply fixing and installation of Concealed stop cocks of approved Jaquar make or equivalent (to be provided only at the entry point of plumbing lines within the toilets / pantry)

Providing and fixing European type wall -hung white water closet of approved make with Consiled Cistern for flush valve, push valve concealed type with coverplate 32 mm size of approved make including Chair Bracket, soil pipe, vent pipe upto outside face of wall,100mm plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete.

Providing and fixing Health Faucet : Providing and fixing health faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed.

Providing and fixing C.P.a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing 75mm PVC nahani trap with grating etc. complete.

Internal Drainage System

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 75 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Providing, laying and fixing P.V.C. Pipe of 40 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 50 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and Fixing of Brass Y Strainer 32mm Dia (ZOLOTO)

Providing and Fixing of Brass SS Floor Clean out plug 100mm Dia (Chilly)

Supplying & erecting cast iron double flange butterfly valve of size 65 mm dia. complete as per specification no. FF-VL/BFV

Providing and Fixing of Nitrill rubber Insulation 9mm Thickness 22mm Dia (Armaflex)

Providing & Fixing of PVC Multi Floor Trap 110x75x50mm Dia

External Water Supply System

Providing & Fixing of UPVC ASTM Pipe SCH -80 For External Water Supply and Irrigation System.

Providing & Fixing UPVC SCH-80 20mm Dia

Providing & Fixing UPVC SCH-80 25mm Dia

Providing & Fixing UPVC SCH-80 32mm Dia

Providing & Fixing UPVC SCH-80 40mm Dia

Providing & Fixing UPVC SCH-80 50mm Dia

Providing & Fixing UPVC SCH-80 65mm Dia

Providing & Fixing of Brass Ball Valve For Water Supply and Irrigation System

Brass Ball Valve 32mm Dia

Brass Ball Valve 40mm Dia

Brass Ball Valve 50mm Dia

Providing & Fixing of Brass Float Valve 32mm Dia

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessoriess u chas inlet, outlet overflow of all tanks capacity above1000 to 20,000 litres

Providing & Fixing Under Ground Water Tank of size 4.20 m x 3.00 m x 2.00 m height top covered with inside protection coating., (25.0 Cu.m. volume )..

DOMESTIC & FLUSHING TRANSFER PUMP (1W+1SBY)

5 H.P, 3 phase 440V 50Hz 2900Rpm KSB make Open well Submersible pump with Copper rotar & S.S Shaft. Each pump capacity 450 L.P.M at 30 Mtr discharge head with 3 Mtrs Submersible power cable.

G.I Fabricated I.S.I “C” Class G.I Pipe/UPVC Sch-80 Pipe & Fittings For manifold with header for 2 Pump set. Including Branches pipe with fittings for each pump, Non-return valve, Butter fly valve with M.S Fabricated Flanges, nutt bolt, Warsher, Gasket & 65 m.m G.I main Header Etc.

32 m.m U-flow make S.S body with Weather proof 230V Solenoid Valve with coil. Water Level Controller Control of Solenoid Valve & Dry Run Protection with Floater Switch & Censor. Control Cable Etc.

Power & Control Cable from Panel to Pumps & Panel to Controls with Fittings. Approx. 25 Mtrs Each.

200 Ltrs Capacity Pre-Charged Diaghpram Pressure Tank

PRESSURE BOOSTER SYSTEM(DOMESTIC& FLUSHING)(1W+1SBY) Above Price For Pressure Booster System Dom+Flus Each Set 1set = 2 pumps

1.5 H. P, Single phase 230V/3 phase 440V 50Hz 2900Rpm KSB make Horizontal Multistage S.S Inline pump. Each pump capacity 150 L.P.M at 25 Mtr discharge head with 3 Mtrs Submersible power cable.

System mount with complete horizontal MS Fabricated many fold typemounting base stand with necessary 80mm G.I “C “class main suction header withstrainer 65 mm flanges GI pipe with 50 mm Butter fly valve50 mm branch pipe line with Butterfly valve, N.R.V & 65 m.m Discharge header with Ball Valve, Branches For Each Pumps.

300 Ltrs Capacity Pre-Charged Diaghpram tank with Fittings.

Float Switch (Censor) with lid Wire.

Pressure Switch, Pressure Gauge with Fittings.

Cables as Per Requirement for Power & Controls.

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete.

Providing and fixing of Admittence Valve 110mm Dia

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Providing & Fixing of 65mm dia flow meter

Providing & Fixing of 20mm dia sprinkler

Providing & Fixing of 16mm dia PE-Ki-tech Pipe For Drip Irrigation system

Providing and Fixing of Nitrill rubber Insulation 9mm Thickness 28mm Dia (Armaflex)For Hot Water Line

Providing and Fixing of Nitrill rubber Insulation 9mm Thickness 35mm Dia (Armaflex)For Hot Water Line

ADITIONAL REQUIRED PACKAGE- EXTERNAL CIVIL

Raising of folding to reach the entire surface area of bridge or Building .up to 10 m height above ground level, made with MStube ,horizontal and vertical tub joint with cup and lock system with MS tubes, challies,MS clamp and maintaing it in a serveciabl econdition for execution work of cleaning and/or pointing and or/applying protection coating and/ inspection of work at required locations and removing it there after etc complete .(Item includes making of temporary support for scaffolding, cost of scaffolding, labour, material, safety devices,etc.,all complete)

Providing, drilling and fixing Nipples for pressure injection grouting of polymer cement grout etc. complete

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks for outdoor landscape, of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) - Basic rate -120/- Sft

Design & detailed engineering approved by an engineer registered under Istructe, having at least 10 years experience of designing tensile structures and similar roof structures, having authorised copies of non-linear design, analysis and verification software for such structures, supply, transportation, erection at site & commissioning of Tensioned Membrane Structure on MS Circular Pipe Structure as per the Architect's drawing including preparation of Membrane shop drawings of PVC tensioned Membrane Roof structure, aluminium clamp bards, hardware like bolts, CSK Allen screws, washers, keder profile extrusion to receive bolts, galvanized cables as per Indian standard, PVC coated membrane made from Mehgies / Ferrari / Sattler companies.

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade complete. Spec. Number : As directed by Engineer-in-charge.

Design & detailed engineering approved by an engineer registered under Structural, having at least 10 years experience of designing tensile structures and similar roof structures, having authorised copies of non-linear design, analysis and verification software for such structures, supply, transportation, erection at site & commissioning of MS Structure for Tensioned Membrane Structure as per the Architect's drawing including preparation of shop drawings for Roof structure, item completes including hardware like bolts, CSK Allen screws, washers, keder profile extrusion to receive bolts & Crane of upto 50 ton Capacity to mobilise & demobilise, lifiting & shifting up to G+2 floors. Item includes finishing top of MS with Zinc primer / epoxy Primer & Epoxy / spray Paint.

Design, Supply , Insttaltion of Ferrari Fabric ( 902 S2) with SS and GI accessories for tenssion and Grip of the Fabric with Structure on Existing MS Structure Desiged for the Fabric and Shape given by arhchitect .

Providing & Fixing Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25 m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with net lon mesh including 300 mm thick side filling around outside of RCC rings (annular space) with 40 mm size boulders including filling of recharge pit upto 0.5 m depth with 25 -75 mm clean washed gravels from bottom up followed by 0.5 m depth of 10-25 mm of clean washed stones followed by 0.5 m of washed river fine aggregate (naturalsand/crusheds and VSI grade finely washed etc.) including net lon mesh between each gravel/fine aggregate (naturals and /crushed sand VSI gradef inel ywashed etc.) media layer including covering with RCC slab, manhole frame & cover,PVCrungs,PVCend-caps,fittings etc. including arrangement for inlet&outletpipeexcavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding,transportation,taxes,includingallleads,liftsatalllevels.Allmaterialshouldbeofapprovedmake. All works complete as per the drawing, technical specification and direction of the Engineer in

P&F PVC Pipe 110mm Dia : providing and fixing 110 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete P&F Vitrified Tiles flooring (Italian effect) : Providing and fixing decorative Italian marble effect tiles of size 600 x 300 mm of about 5 to 6 mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete directed by Engineer in charge.

Providing and fixing of P.V.C. 160 mm Rain Water Pipe 6Kg/cm2 Pressure.

Inspection Chamber : Supplying and constructing brick masonry inspection chambers with 230/345mm brick masonary in cement mortar (1:4) mix, 20mm thick cement finish plastered internally and externally in cement mortar 1:4 mix incl. necessary excavation, foundation concrete 1:3:6 mix 150mm thick, top cover of FRP having 20T capacity, fixing in coping, S.W.G. half round channels 150mm dia, concrete haunches, and frame 16mm dia. C.I. rod rungs at 300 mm c/c etc. complete as shown on the drawing and/or directed and instructed by Engineer/Owner. NOTE: (Brick work to be 230mm thick upto 1.0M depth and 345mm thick beyond 1.0M depth).

External Drainage System

Providing, laying and fixing P.V.C. pipe of 200mm dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Gully Traps : Supplying and fixing in position stone ware gully traps 150 x 150mm size with cover including brick masonary chamber of clear internal size as 300mmx300mm with cement plaster finishes

Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects: 300 MM DIA RCC HUME PIPES

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 800 mm diameter in proper line, level and slope etc. complete.

Supply,Installation,Testing & commissioning of,12M Height Street Light Pole, ingress IP 65 with bracket for mounting on multiple flood type,at,asymmetric,concentrating light distribution, long “B” grade G.I. pipe welded to pole cap of 125 mm dia x 60 cm. long duly welded with supporting M.S. plate of 3mm and with bolts of suitable size duly painted with one coat of red oxide and two coats of allum. paint duly wired complete..

Providing cement concrete foundation for street light & lighting pole foundation including excavation for the poles 60 cm x 60 cm x deep 1/6 of pole length in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered and with necessary curing and finishing in an approved manner. (for above 6 m poles)

Supplying, installing, testing and commissioning solar street light pole comprising of 9 W LED fitting, 12V 18Ah maintenance free lithium battery, min. 40 Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL ( with 5 years warrantee )

Providing and laying concrete pipes of I.S.NP.class of 300 mm diameter in properline, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

LANDSCAPE

Lawn Plantation With Material :- Grassing with grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and filt for mowing including supplying good earth if needed (the good earth shall be paid for separately) In rows 5 cm apart in either direction.

Providing Laying and Preparing shrubbery :- Excavating the ground in all types of strata to required depth of 45 cm , removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden soil and manure thoroughly, well, levelling, watering on previous night. Planting well rooted shrubs 0.5 mtrs. apart as & when directed and maintaining till well established by watering, weeding, stirring, replacing casualties, etc. complete.

Provinding and fixing Ring stone high glossy (43 X 35 CMS. HT.)

Provinding and fixing Ringstone XL BIG MATT (60 X 45 CMS. HT.)

Providing & Laying Loose riverwash rough river with Polish pebbles on site as Directed by Architect with minimum 150mm thk (Size 12 to 50 mm )

INTERIOR WORKS

FLOORING AND TILING

Providing & fixing machine cut machine polished 18 mm to 20 mm thick granite stone for treads and risers of staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing & laying Composite Marble of approved make, shade and pattern for flooring / Dado in required position / design laid on hard plastered/ PCC surface with suitable Adhesive approved by Marble manucturer , item includes curing and cleaning, covering with POP or vinyl sheet & two coat polishing after finishing of allied interior work etc. complete.16 mm thick having water absorption less than 0.05% (AGL, Nitco or equivalent, ), complete as per directions engineer incharge. Basic Rate of composite marble- 350/- per sft.

Providing & laying in position flooring of granite stone for passage and halls of approved shade and size 18mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing & Fixing Italian marble flooring : Providing and fixing Italian marble in flooring, skirting, wall dado etc as approved using 15-20mm thick required size & pattern and of approved shade, color and texture laid using white cement slurry over 20 mm thick base of cement mortar 1:4 (1cement : 4coarse sand) followed by laying, fixing and jointing with epoxy and teemax mastic, white cement slurry mixed with matching pigment, including rubbing, curing, of approved profile and polishing of mouldings and edges to give high gloss finish etc, complete at all levels and as per direction of E-I-C. (Basic rate Rs.300/sft)

Providing & laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing & Fixing Vitrified Tiles flooring (mirror finish) 900 x 900 or any size : Providing and laying Rectified and vitrified mirror finish decorative type tiles of size of approved make, shade and pattern for flooring in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.a) Minimum 900 mm x 900 mm and 8-10 mm thick having water absorption less than 0.05% (RAK, Kajaria or equivalent, Basic rate Rs. 150/sft)

Ppoviding & Fixing Laminated Wooden Flooring : Providing and fixing pergo original mort hand wearing laminate or equivalent flooring with excellent properties long life time original floor planks should be joined together all the groove etc. complete.

Providing and Fixing of Hexagonal Designer Blocks Blaze Cotto tile as per approved Design & Drawing or as per Direction by Engineer In-Charge. Basic Rate 250 Sqft

P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete

Providing and laying Vitrified tiles having size 60 cm. x 60 cm / 60 cm to 120 cm. confirming to corresponding I.S. for dado and skirting in Toilets and required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry/ grouting cleaning curing etc. complete.

Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M.including cement float ,filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and preparing kitchen Platform upto 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1m.c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing and laying Composite Marble skirting of 100 mm High of approved make, shade and pattern for skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet & one coat polishing etc. complete.16 mm thick having water absorption less than 0.05% (AGL, Nitco or equivalent, )

Providing and laying Rectified and vitrified mirror finish decorative type tiles for 100 mm High Skirting of approved make, shade and pattern for Skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Skirting

Providing and fixing Double patti door frame in Composite marble :Providing single sills (100-200mm wide), jambs and frames of black/approved colour composite slabs of mininmum 15-18mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 300/sft)

Providing double sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, removing existing cills stacking the same and debris disposing off upto a distance of 50 metres, removing, refurbishing & refixing existing alu. grill, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)

Polishing of Composite Marble diamond Polish, waxing etc completed as per instruction by engineer in charge.(For Diamond Polishing )

WOODEN DECK - Providing and fixing of Brazilian Walnut Wood specie 20mm thick x 140mm wide and 910 mm long. Along with Side grooves in the plank for fixing the PVC clips, top surface to be plain. All side groves of the planks to be oiled. Fixing to be done on 1x2 inches Aluminum + Wood reinforced batons with chemical treatment for Termite resistance. Subfloor to be done in Virgin PVC pedestals of a height 430mm imported from Australia. All the hardwares to be used Stainless steel. Surface oiling on the Brazilian Deck Planks to be done in Bona oil imported from Sweden for better durability. Top finish of the deck to be maintained 450mm.

PAINTING

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete.

Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent)

Providing and applying two coats of synthetic enamel paint for window grills and railing of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete.

ProvidingandapplyingtwocoatsApexUltimaPuranatureAnti-PollutionOrequivalentapprovedbrand,paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx,formaldehydes,etc.)inpresenceofnaturalorartificiallight.ItcontainsGrapheneandnanoparticlesoftitaniumoxide.andAbsorbsCO2(4.8Kilogram/15l).plastercrackshouldbefilledbyAcrylicbaseCrackseal/TexturedCrackfiller,PainthastoappliedononecoatofApexUltimaPuranatureAntiPollutionPrimerorEquivalent.WarrantyShouldbegivenbytheManufaturerTheworkshouldbedonebytheManufacturerRecommendedapplicatorandhes

DOORS AND WINDOWS

Providing & Fixing of Flush Door Shutters in Veneer finish : full height Both side mating veneer finished door shutters with control acces security system at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 finished with 3.5 to 4.0 mm mating veneer finished with grooves on both side including melamine polishing anti-termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & Fixing Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & Fixing Door Shutters in one side Laminate & One Side Veneer finish : and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 including melamine polishing anti-termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, ironholdfast of size300mmx40mmx5mm with oil painting, etc. complete

Providing and fixing frame with 12mm ply finished with veneer architraves as per drawing without ventilators, windows, fanlights etc., including all mouldings, rebating, holdfast and finishing with two coats of melamine polish of approved shade etc. complete as per Architect's Drawings. and directed by engineer incharge.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

Providing and fxing of uPVC Window Openable/ Sliding, Ventilator etc of all sizes, made out of Coated extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge.

ROOFING AND CEILING

Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediatechannels.Additionalintermediatechannelsshouldbefixedtostraphangersforadditionalsupporttopreventstrappingatevery1200milimetreitemtobecompletedinallrespectincludingnecessarysleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5, Light Reflectance 85% ,Thermal Conductivity k=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete.

Providing and fixing 3.5 to 4mm thick Veneer finish wall/Ceiling Panaling made out of 50x25 mm (finishedsize)C.C.T.W.frame work or size of 600x600 mm center or as per site condition covered by 6mm thick marine ply wood of the generally confiriming toI:S710-1980 finished with 3.5to4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and wood work with ten years guarantee bond etc.including all lead and lifts complete asperArchitects Drawing and instructions of Engineer Incharge.

Providing and Fixing Laminated Ceiling with Wooden Frame hanfing from true slab coated with Wood guard, fnished with 12 mm and 18 mm Marine ( IS 710 )plywood as per detailed design, finished with 1.0 mm thick decorative laminate, edges finished with Laminate or Wooden Beading as per architect Detailed design.

Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 m m with frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats etc. complete. (excluding T.W. runner to be paid separately).

Providing and fixing false ceiling of WPC 20 mm thick including scaffolding, if necessary, all iron work and beading i.e. visible surface etc. complete. (excluding frame work and runners)

ProvidingandfixingMangaloretiledroofingwithclass'AA'tilesincludingsecuringthelastcourseoftilesneartheeaveswithsteelflat40mmx3mmand1.22mmwirefixing50mmx25mmhorizontalteakwood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles).

WALLPAPER & TEXTURE

Providing and fixing imported quality wall paper of 0.8 mm. thick of approved quality and design made up of poly venyl coating with fabric backing five resistant wipe cleaning strain resistant and having height of 390 Gram/Sq.M.. etc. and as directed by Engineer-in-charge Basic Rate 350/- Sft

EXTERIOR Texture paint : Providing and applying EXTERIOR Texture paint of ASIAN PAINT'S GRANIZA or equievatent of approved colour, shade and quality to old/new surfaces in two coates of luster paint including scaffolding, preparing the surfaces etc. complete. (including primer coat and laambi).(Asian, Dulux or equivalent)

Frosted Film for glass partitions Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)

CARPENTARY AND INTERIOR

P&F Veneer Panelling : Providing and fixing on site veneered paneling 4 mm. thick with 12 mm. thick Commercial ply on basic partition of the requisite manufacturer viz anchor /Century / Kenwood / Duro or equivalent generally confirming to I.S. 303 finished with necessary grooves antitermite treatment to plywood and on back side of veneer with melamine polishing etc. including all leads and lifts etc. complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..

Providing and applying PU polish of required finish to the Veneer Paneling work by spray machine including knotting and preparing the even surface by scraping ,scaffolding if required etc.complete.

Providing and fixing Bison Board panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Bison Board as per design.

Providing and fixing Bed Side Drawer unit 0.50 M X 0.45 M X 0.400 M and made up of 18MM Marine (ISI-710). Plywood and drawer frame and bottom made up of 12mm plywood and outer side finish Veneer with Polished , All edges to be finished with Edgeband.

Providing and fixing Bed Side Drawer unit 0.50 M X 0.45 M X 0.400 M and made up of 18MM Mariane (ISI-710). Plywood and drawer frame and bottom made up of 12mm plywood and outer side Laminate finish , All edges to be finished with Edgeband.

Providing and fixing Bed Side Drawer unit 0.750 M X 0.45 M X 0.450 M and made up of 18MM Mariane (ISI-710). Plywood and drawer frame and bottom made up of 12mm plywood and outer side Laminate finish , All edges to be finished with Edgeband.

Providing and fixing Dresser Unit Size 1.00M X 2.60M Drawer Size is 1.0M X 0.450M X 0.60M made out of Top ,sides,etc. made out of 18mm thk. Marine plywood to be providing in dwg. & 6mm thk. mirror on 18mm thk. Shutter.Finishes - All the external surfaces to be finished with 4.0mm thk. Veneer and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and fixing Dresser Unit Size 1.130M X 0.50M X 0.750M made out of Top ,sides,etc. made out of 18mm thk. Marine plywood to be providing in dwg. & 6mm thk. mirror on 18mm thk. Shutter.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & supplying of 2 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design

Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing and Fixing CENTER TABLE having made up of 18mm thick Mariane plywood (ISI-710) made up of as approved design and Drawing and finsihed with 1.00mm thick LAMINATE IS-2046 premuim quality is approved.

Providing & supplying of Center Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top. Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 900 x 600 x 450mm ht.

Providing & supplying of Dining table chair with having cushion on seat and back with wooden leg complete as per Architect's Drawings. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Officer's chair W560xD560xH1000mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled, with foam, Five star nylon base with nylon casters lift, Adjustable seat height and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Providing & Fixing of Exclusive chair as per approved design and sample Basic Rate of Chair is 40000/- for Chairman and Dy. Chairman

Providing and fixing study table made out of 25mm thick Mariane plywood with drawer units on one side of table upto height of 2'6" with 4 mm veneer on all exposed faces finished with melamine polish and 2"x2" European/ Germansteamed beech edge mouldings with Chairs. All mouldings to be PU polished.

Providing and fixing TV unit made out of Top ,sides,Drawer Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 4 mm thk. Veneer With Polish and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Veneer - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and fixing TV unit made out of Top ,sides,Drawer Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and Cupbord made out of Top , sides, Self, Shutter , Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 4.0mm thk. Veneer and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Veneer - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and Cupbord made out of Top , sides, Self, Shutter , Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Dining Table type -1, providing & Fixing dinign table type -1 as per detailed design with SS/ Wood frame work with top base in marine plywood finished with surface as per architect drawing in stone / tile etc.

Dining Table Chair - Basic Rate 7500/-

Reception Table (10'0" x 3'0"): Providing and fixing in place, table of size 3050mm x 900mm (worktop size)comprising of 25mm thick table top made of particle board with Ledge of size 2450mm x 350mm x 1250mm High having sliding shutters with locks and a drawer pedestal of size 400mm x 500mm consisting of 2nos. drawer of 100mm deep and 300mm deep filing drawer having common lock including modesty apron to be made out of 19mm thick commercial plywood/particle board. The table top to have post form edge. All complete including key board drawer, CPU trolley and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8mm thick laminate of approved shade. all complete as directed. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming toI.S. 303)

WORK STATION - L1050W600H750 Providing and fixing in place 600mm deep running counter made of particle board with post form edge profile for 25mm thick table top consisting of a drawer pedestal of size 450mm x 500mm x 500mm & 400mm high Modesty partition with key board, CPU trolley for every 900mm of length and all the necessary hardwares etc. complete. All the exposed surfaces to be finished with 1.0mm thick laminate. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

Roller Blind Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)

Providing and fixing Double Bed havingh size of 1.80M x 2.10M x 0.4M r as per room dimensions ,Providing and fixing Bed made out of top , sides, front, Back panal with Lether Coushion, Bottom etc.in 18mm thk. Marine plywood.Finishes - All the external surfaces to be finished with 4.0mm thk. Veneer and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and fixing Single Bed havingh size of 1.0 x 2.20M x 0.30M or as per approved layout and designProviding and fixing Bed made out of Top, sides, front, Back panal with leather coushion end to end ,Bottom etc.in 18mm thk. Marine plywood.Finishes - All the external surfaces to be finished with 4 mm thk. Veneer and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing and fixing Single Bed havingh size of 1.0 x 2.20M x 0.30M or as per approved layout & design Providing and fixing Bed made out of Top, sides, front, Back panal with leather coushion end to end ,Bottom etc.in 18mm thk. Marine plywood.Finishes - All the external surfaces to be finished with 1 mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Providing MATTRESS 125mm thick (5"). Single bed complete foam which would be temperature friendly , superior drying , inbuilt protection against bacteria and suite of approved colour and brand , as per design, specification and drawing etc. complete.

Copper Colour Mirror with Panelling : Providing and fixing Copper Colour Tint Mirror panelling with framework 12 mm thick plywood finished with 8mm thk tint grey colour mirror fixed as per Architect's Drawings. (Plywood of the generally confirming toI.S. 710)

Magnifying Mirror approved make & as directed by Engineer In-Charge

Providing PILLOWS of size (18"x 27") in suite of approved colour and brand , as per design , specification and drawing etc.complete .

Providing PILLOWS of size (20"x 30") in suite of approved colour and brand , as per design , specification and drawing etc.complete .

Providing PILLOWS of size (20"x 36") in suite of approved colour and brand , as per design , specification and drawing etc.complete .

Providing and Fixing 600 *600 Grid of Aluminium section of size 50mm X 38 mm having wall thikness not less then 1.4 mm for all type of panneling wooden Frame work to create service route and to avoid undulation in panelling, to be fixed on existing surface with screw, complete as per Direction by Engineer In--Charge.

Providing and fixing full height toughened glass partion height more than 1.34m of 12mm thick with frosted effect including edge policy with necessary stainless steel finish heavy type brass patch fitting to hold the glass etc. complete

Rugs 1500 x 900 : Providing & fixing Hand Made Saggy 3D Carpet made up polyester Yarn. complete as approved by the Engineer in charge etc. all complete. (Millicane or equivalent)

Providinng & Fixing Picture Frame as per Design & Drawing

Providing & Fixing Charcol Panel of Plain, Baffel design or as per Given Design for panelling, Ceiling etc. over rrready surface of wall / Partition / Panelling, etc, completed as per Architect design and instructions engineer in charge, basic Rate for charcol panel Rs. 550/- Per sft

HVAC WORKS

High Side Work

VRV X anti corrosion cooling only Out door Unit with revolutionary VRT , technology & inverter compressorswith refnet (top discharge)

Outdoor unit

Outdoor unit (26 HP)

Outdoor unit (28 HP)

Outdoor unit (32 HP)

Indoor Units Ceiling mounted Cassette (round flow) Type with remote, panel, & drain pump

Cassette (round flow) Type 3.98 Tr

Cassette (round flow) Type 3.18 Tr

Cassette (round flow) Type 2.1 Tr

High static ceiling mounted duct type with remote

High static ceiling mounted duct type with remote6 Tr

Refnet (Y joint)

Low Side Work

Installation of Outdoor Units of Following Configuration

Installation of Outdoor Units 26 HP

Installation of Outdoor Units 28 HP

Installation of Outdoor Units 32 HP

Standard Installation Charges for:

Installation of Indoor Unit Cassette Unit

Installation of indoor unit - duct type

Fabricated structure for indoor hanging on first floor

Refrigerant Piping with K flex insulation & necessary support

Refrigerant Piping with Superlon insulation & necessary support - VRV system

Interconnecting control cabling between IDU's & ODU's -VRV

Wire with Conduit Pipe

wire From IDU to remote controller

MS stands for the Out door units with accessaries

MS stands for the Out door units 26 HP

MS stands for the Out door units 28 HP

MS stands for the Out door units 32 HP

Gas Charging Pressure Testing, Nitrogen flushing, gas charging,& testing of the airconditionign system.

Additional Gas Charging with R-410A Gas - 26 HP

Additional Gas Charging with R-410A Gas - 28 HP

Additional Gas Charging with R-410A Gas - 32 HP

Commisioning charges of ODU Unit

Hard PVC plumbing grade Drain piping with Nitrile insulation & nessesary supports.

Hard PVC plumbing grade Drain piping with Nitrile insulation 50 mm

Hard PVC plumbing grade Drain piping with Nitrile insulation 32 mm

Installation Refnet (Y Joint)

Drain Pump for Ductable Unit

Fresh air inline fan 150 cfm/ 20mm static for Atrium

Installation of fresh air fan with accessories, canvass & fabricated stand with cover

Under deck insulation - 50mm thk ,24kg/m3 density with wire mesh

Fabric ducting for Ductable

Kitchen fresh air system

SITC Cabinet type Exhaust air fan 650 cfm / 20mm static with filter (additional 2 filters)

SITC Cabinet type fresh air fan 500 cfm / 20mm static with filter (additional 2 filters)

Pantry Ventilation system

SITC Cabinet/Inline type Exhaust air fan 650 cfm / 20mm static with filter (additional 2 filters)

SITC Cabinet/ Inline type fresh air fan 500 cfm / 20mm static with filter (additional 2 filters) Makes:- Cosmos, Cariyare/Nicotra & Ostberg

24 Guage ducting for Kitchen & pantry

Canvass for Pantry & Kitchen Ventilation Fan

SITC Cabinet/Inline type Exhaust air fan 650 cfm / 20mm static with filter (additional 2 filters)

SITC Cabinet type fresh air fan 500 cfm / 20mm static with filter (additional 2 filters)

GI ducting Accoustic insulation

GI ducting Thermal insulation

Cable tray (300 mm x 75 mm)

Cable tray with cover (300 mm x 75 mm)

ODU Cowl Piece

Linear Grille

Jet Nozzle

Exhaust Air Grille For Kitchen

Fresh Air Grille For Kitchen

Electrical Cable for ODU

4 Core, 6 Sqmm

4 Core, 10 Sqmm

4 Core, 16 Sqmm

Starter Panel for ODU

2nd Year After Completion of Defectliability Period.

3rd Year After Completion of Defectliability Period.

4th Year After Completion of Defectliability Period.

5th Year After Completion of Defectliability Period.

ELECTRICAL WORKS

MLTP PANEL

Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry 2. Powder coated - RAL7310 3. Base frame - 100mm C channel 4. Incomer - ATS - __A 5. Outgoing - Lighting, AC, PDB, Utility with Timer and Contactors and APFC feeders 6. SPD for the Main Incomer and AC Feeder 7. Please refer the SLD

STREET LIGHT PANEL

VTPN DB (LP Main DB)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorporating the details as shown in the SLD . ( 8 WAY VTPN D.B.) (Make- Legrand or equivalent ) I/C : 63A, 4P,10KA, MCB OUTGOING : 40A,TP,10KA, MCB - 3 NOs. 40A,SP,10KA, MCB - 9 NOs.

VTPN DB (UPS Main DB)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorporating the details as shown in the SLD . ( 8 WAY VTPN D.B.) (Make- Legrand or equivalent ) I/C : 63A, 4P,10KA, MCB OUTGOING : 40A,TP,10KA, MCB - 3 NOs. 40A,SP,10KA, MCB - 9 NOs.

VTPN DB (HVAC Outdoor Unit)

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorporating the details as shown in the SLD . ( 8 WAY VTPN D.B.) (Make- Legrand or equivalent ) I/C : 63A, 4P,10KA, MCB OUTGOING : 40A,TP,10KA, MCB - 3 NOs. 40A,SP,10KA, MCB - 9 NOs.

LIGHTING AND POWER DB

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorporating the details as shown in the SLD . ( 12 WAY SPN D.B.) (Make- Legrand or equivalent ) I/C : 40A, 2P,10KA, MCB I/C : 40A, DP,10KA, ELCB/RCCB (100mA)- 1 NOs OUTGOING : 10A,SP,10KA, MCB - 8 NOs.

UPS POWER DB

Supplying, transporting to project site, installing and commissioning of wall mounted double door DB with IP-43 dust and vermin proof incorporating the details as shown in the SLD . ( 12 WAY SPN D.B.) (Make- Legrand or equivalent ) I/C : 32A, 2P,10KA, MCB I/C : 25A, DP,10KA, ELCB/RCCB (100mA)- 1 NOs OUTGOING :10A,SP,10KA, MCB - 8 NOs.

Supplying, transporting to project site, installing and commissioning of 200A, FP, MCCB,25 KA in sheet metal enclosure.(Make- Legrand or equivalent )

Supplying, transporting to project site, installing and commissioning of 100A, FP, MCCB,25 KA in sheet metal enclosure.(Make- Legrand or equivalent )

SITC of 3-Ph Power Sockets at Shop Floor for Outdoor AC Units with 40A, 5Pin, Socket & Plug (3P+N+E) - 1no; 40A, TP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )

SITC of 3-Ph Power Sockets at Shop Floor for Outdoor AC Units with 63A, 5Pin, Socket & Plug (3P+N+E) - 1no; 63A, TP MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )

Supplying, transporting to project site, installing and commissioning of 40A, FP, MCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent )

Supplying, transporting to project site, installing and commissioning of 25A, FP, MCB, 10 KA in sheet metal enclosure for Inverter. (Make- Legrand or equivalent )

Supplying, transporting to project site, installing and commissioning of 40A, FP, MCB+ELCB (100mA),10 KA in sheet metal enclosure.(Make- Legrand or equivalent )

Industrial Plug and Sockets

Kitchen-3phase Supplying, Transporting to project site, Installing the Industrial Plug and Socket in approved manner, fixing of the ELMCBs, proper termination using standard accessories available with the IPS, wiring with suitable size lugs and glands, testing and successful commisioning. The components and the type of the IPS to be used are as below - 1. Surface Mounting with dinrail interlocked switch and socket - 1no. 2. IP55 3. IK 08 - IEC62262 4. 32A FP RCBO 100mA - 1no. 5. 32A - 3P + N + Earth. 6. Mounting on suitable MS Frame which shall be fixed in the wall, painted with two coats of red oxide and one coat of approved enamel paint.

Kitchen-1phase Supplying, Transporting to project site, Installing the Industrial Plug and Socket in approved manner, fixing of the ELMCBs, proper termination using standard accessories available with the IPS, wiring with suitable size lugs and glands, testing and successful commisioning. The components and the type of the IPS to be used are as below - 1. Surface Mounting with dinrail interlocked switch and socket - 1no. 2. IP55 3. IK 08 - IEC62262 4. 32A DP RCBO 100mA - 1no. 5. 32A - 2P + Earth. 6. Mounting on suitable MS Frame which shall be fixed in the wall, painted with two coats of red oxide and one coat of approved enamel paint. Suitable Cable End Box shall be provided.

SITC of UPS ON LINE 60KVA Three Phase Input & Three Phase Output complete with necessary protections,LCD DIsplay, Fault Memory, RS/Ethernet Interface Compatibility, with batteries of Excide make maintenance free (30MIN Back-Up), with battery terminals wire and necessary copper wire, with plug and socket top Accessories,. Battery Stand, Isolation & Proteciton Switch for Battery Bank, Shrouds over Battery Terminals for Safety Purpose, Smart UPS with IGBT rtechnology, Input p.f. Unity, THD below 5%, (Make-Emerson or equivalent )

200 KVA DG Set

Providing, installing, testing and commissioning of silent type Diesel Generating set of capacity 200 KVA at 1500 RPM, 0.8 lagging power factor at 415 Volts suitable for 50 Hz, 3 phase system (Make-Caterpillar, Powerica, Kirloskar ) Details spectifications are given in Technical spectifications.

Supplying, transporting to project site, installing and commissioning of AMF panel

CABLES & CABLE TRAYS

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

3.5C X 150 Sqmm. A2XFY Cable

4C X 25 Sqmm. 2XWY Cable

4C X 16 Sqmm. 2XWY Cable

4C X 10 Sqmm. 2XWY Cable

4C X 6 Sqmm. 2XWY Cable

4C X 4 Sqmm. 2XWY Cable

4C X 2.5 Sqmm. 2XWY Cable

3C X 6 Sqmm. 2XWY Cable

3C X 4 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. YY Cable

3C X 1.5 Sqmm. YY Cable

4C X 1.5 Sqmm. YY Cable

1C X 10 Sqmm. YY Cable

1C X 6 Sqmm. YY Cable

End Termination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated single compression brass cable glands, copper compression type cable sockets , PVC insulating tapes, etc.:

3.5C X 150 Sqmm. A2XFY Cable

4C X 25 Sqmm. 2XWY Cable

4C X 16 Sqmm. 2XWY Cable

4C X 10 Sqmm. 2XWY Cable

4C X 6 Sqmm. 2XWY Cable

4C X 4 Sqmm. 2XWY Cable

4C X 2.5 Sqmm. 2XWY Cable

3C X 6 Sqmm. 2XWY Cable

3C X 4 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. YY Cable

3C X 1.5 Sqmm. YY Cable

1C X 10 Sqmm. YY Cable

1C X 6 Sqmm. YY Cable

Trunking & Cable Tray. Supply Installation Testing Commissioning of MS Powder Coated (as mentioned in each otem description), Perforated/Ladder 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Rate to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

50X50 mm GI Perforated Cable Tray

100X50 mm GI Perforated Cable Tray

200X50 mm GI Perforated Cable Tray

300X50 mm GI Perforated Cable Tray

450X75mm GI Perforated Cable Tray

600X75 mm GI Perforated Cable Tray

Installation & Comissioning of Perforated Cable Trays - SS304. - Similar CABLOFIL make - Autoclic type with all necessary suports fixed using Hilti make anchor fastners suitable to the size of the cable tray and accessories (Coupler SQ splice washers and Nut bolts hardware) and properly installed using specific tools and tackles.

PVC conduits,Aluminium Raceway & Floor Junction Box: - Supplying, Installation, Testing & Commissioning of following G.I junciton boxes in floor of 14 SWG thick duly painted. The rate shall be inclusive of providing Sand, Cement etc. and finishing the same upto the floor level as per instructions of the Architect. MK make or equivalent Junction box

100 x 40 mm Aluminium raceways, 2mm thick.

150mm X 150mm X 2mm for tile mounting.

200mm X 200mm X 2mm for tile mounting.

300mm X 300mm X 2mm for tile mounting.

Supplying and fixing Floor Junction Box (Weatherproof )with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches).

Providing & Fixing 2mm thick SS cover plates.Cover plates shall be champhered at all edges

150mm X 150mm X 2mm for tile mounting.

Supply, Installation, laying & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of 32mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of 20mm ISI FR Mark PVC Flexible conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of 25mm ISI FR Mark PVC Flexible conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of PVC Trunking 100X50

Supply, Installation, laying & terminating of PVC Trunking 50X50

Supply Installation Testing Commissioning of MS Powder Coated (as mentioned in each otem description), Perforated/Ladder 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Rate to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

200X50 mm GI Perforated Cable Tray Cover

300X50 mm GI Perforated Cable Tray Cover

SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.)

Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two Nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support)

POWER WIRING

Supplying, installing, testing and commissioning of a consisting of modular , 2 Nos of 6A 5-pin sockets and 1no 16A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent )

Description Same as Above Item - Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand- or Equivalent )

Supplying, installing, testing and commissioning of a consisting of modular , 1 Nos of 6A 5-pin sockets and 1no 6A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent )

Description Same as Above Item - Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand or Equivalent )

Supplying, installing, testing and commissioning of a consisting of modular , 1 Nos of 16A 5-pin sockets and 1no 16A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase & 1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent )

Description Same as Above Item - Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand Equivalent )

Supplying, installing, testing and commissioning of USB Socket.

LIGHT AND POWER POINT WIRING

sub main Light Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx1.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

sub main Power Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

SITC of Conceled/Above False ceiling Light Point with 25mm Medium Duty rigid PVC Conduit , 3 X1.5 sq. mm FRLS PVC Wiring along with Modular 6A Switch in modular box with all other required accessories etc. complete. ) . ISI Mark 25mm Rigid PVC Conduit must be consdered in this item. Wall chasing & reinstatement must be considered in this item only.(Wall light point + Tube light point)

SITC of Primary Light Point controlled by one 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)

SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .)

SITC of 2 way Light Point controlled by two 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)

SITC of Primary Light Point controlled by 10A SP MCB.(Point Length will be Avg. 10Mtrs for first point from LPDB .)

SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .)

SITC of conceled/above false ceiling Wall Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 6A Socket in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling 2 Way Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Bell Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Exhaust Fan Point with 2X1.5 sq. mm + 1X1.5sq. mm FRLS PVC Wiring in pvc Conduit (of ISI Make) along withModular 6A Switch in modular box with all other required accessories, Fan Box, Junction Boxes etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) Wall chasing & reinstatement must be of pipes. .

SITC of conceled/above false ceiling Foot Lamp Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Insect Catcher Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false Ceiling Master Key Card Switch Point with 2X4.0 sq. mm + 1X2.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with modular box with all other required accessories etc.

Supply, Installation & Commissioning of following lighting fixtures

Imperia LED - IP65 Suface / Pendent Mounted LED Luminaries 40 Watt

15W Mollis Downlighter Round 15 Watt

Vertica-Decorative Suspended COB Downlight 10 Watt

Wipro Orbit slim-400mm dia suspended luminaire 20 Watt

Immaculate+ : Recess Mounted 2ft x 2ft LED Luminaire with Diffuser 30 Watt

MollisX- 9W Deep inset downlighter 9 Watt

Fokus + LED COB Downlight 9 Watt

MoonLED - IP65 Circular LED Wall Light suitable for true ceiling 10 Watt

Trim Neo LED 4 ft Batten 36 Watt

Bedside Lamp

Supply & installation of 200W LED flood light for high mast. (Similar to Havells )

Supply & installation LED Gate Post Lamp

SITC of Supplying and erecting Exhaust fan mediumduty 230 V A.C. 50cycles 225 mm. 1400RPM with condensor complete erected in positionwith necessary materials. Fanmotor with moisture proof treatment and‘E’ class insulation and marking Sr. No. & date of erction.with Louvers to be erected in the aluminium frame.

SITC of Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specifcationno. FG-FN/EXF with Louvers to be erected in the aluminium frame.

SITC of Supplying and erecting Insect Catcher

Supply & installation Foot Lamp with Modular Box

Supply & installation Table Lamp

Supply & installation Floor Stand, Decorative Stand.

BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficient Sweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operation complete with accessories such as 15" long down rod, canopies,

EARTHING PROTECTION

SITC of Early Streamer Type Lightning arrester with Covering Protection Radius of 65 mtrs to be installed on top of the factory roof, with proper clamping of down earth conductor for connection of lightning arrestor to earth pit (supply of down conductor is considered in other item). with Event Counter etc complete. (Lightening Protection for Factory Area) (Similar to Make - Indelec, Protection Level II, )

SITC of Pipe in pipe Maintenance free Chemical Earthing System, Model 3 Meters, Outer Electrode dia 50 mm inner dia 25 mm,filled with highly conductive material with outer electrode coated up to 70-100 micron galvanisation with HDG and inner electrode coated upto 200-250 micron galvanisation Tightly filled with Crystalline Conductor Mixture with HDG along with 2 bags of back fill compound (BFC) 25 Kg each complete (ASHLOK make or equivalent approved by consultants) Rigid PVC Rectangular inspection chamber approximately 1'X11/2' with removable cover (Jain irrigation Make) etc complete, test link etc complete including boring, refilling, levelling etc.

Earthing Conductor:

SITC of GI. Earthing (25X3, 25X5, 25X6, 40X5, 50X6, 60X10 GI Earth Strips), including laying throught ground, above cable trays, ceiling , wall, structural members with screws, saddles, required clamps, nut bolts, lugs, terminations etc complete. With Welding of JOints & application of anti rust paint on joints.

SITC of CU. Earthing (25X3, 25X5, 25X6, 40X5, 50X6 Cu. Earth Strips), including laying throught ground, above cable trays, ceiling , wall, structural members with screws, saddles, required clamps, nut bolts, lugs, terminations etc complete. (All required strips except sizes mentioned in this item will have to be billed as per kg basis only) with Brazing of Joints . Earth Strip must have heat Shrinkable Sleeve. Cost of heat shrinkable sleeve to be considered in this item only.

Dismantling of existing cables/Wire of all types and size up to 10 sq. mm.

Dismantling of existing cables of all types and size up to 50 sq. mm.

Dismantling of existing cables of all types and size above 50 sq. mm.

Dismantling the existing underground cable without damaging it with glands, cable end box including refilling the trench up to ground level and making coils complete.(All type of lights)

Dismantling of existing cables of all types and size up to 10 sq. mm.

Dismantling of existing cables of all types and size up to 10 sq. mm.

Dismantling of existing cables of all types and size up to 10 sq. mm.

Dismantling the existing W.T.fluoroscent fitting / S.V./ M.V/MH.lamp /LED fitting from wall with brackets and making the site as original complete

Dismantling the existing ceiling fan/exhaust fan/cabin fan/bracket fan complete with accessories, G.I. down rod, frame etc. and makingthe site clear.

HUME PIPES AND RELEVANT

Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 500mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects:

300 MM DIA RCC HUME PIPES :- Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects:

Supply of laying of following UPVC pipe of 6Kg/ cm2 including road cutting, excavation to a depth of 750mm, back filling and making good as required and approved:

200 MM DIA UPVC PIPES

150MM DIA UPVC PIPES

MANHOLE CHAMBERS

Constructing brick masonry man hole chambers for electrical & LV Services with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) with RCC top slab of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), 200 mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside and outside plastering 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement inside and rough plaster on outside and making channel in cement concrete 1:2:4 mix, (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete.(1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete M.S s, complete as per standard design and approved drawings, including the cost of excavation, back filling, disposal of surplus earth foot rests and other associated civil works with S.F.R.C cover and frame (heavy duty, HD- 20 grade designation) conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement

1000 x 1000 mm chamber

900 x 900 mm chamber

600 x 600 mm chamber

Supplying 0.30m x 0.30m internal size rectangular air tight composite resin manhole cover and frame of approved brand with grade designation C250 as per standard with bolt and lever type locking arrangement. Covers & frame shall have top abrasion resistant layer conforming to IS-15658:2006 and as specified and as directed by Engineer-in-Charge.

SOLAR SYSTEM

SITC of SUNJEEVAN make gravity feed thermo syphon Pressurized Flat Plate Collecter Type Solar water heating systemCapacity 3000 LPD

Providing & Laying of Cold Water Inlet Pipe of Dia 1 1/4"

Providing & Laying of Terrace outlate Pipe of Dia 1 1/4"

Providing & Laying of Ball Valve of Dia 1 1/4"

Providing & Laying of Non Return Valve Dia 1 1/4"

Providing & Laying of GI Fitting as per requirment on site

Providing & Laying of Down take Double line Kitec Pipe 2532 Dia 1 1/4"

Providing & Laying of Down take Double line Kitec Pipe 2025 Dia 1"

Providing & Laying of Down take Double line Kitec Pipe 1620 Dia 3/4"

Providing & Laying of Down take Double line Kitec Pipe 1216 Dia 1/2"

Providing & Laying of Non Return Valve Dia 1/2"

Providing & Laying of GI Fitting as per requirment on site

Supply & installation of LED Strips for cove light with 25W bollards (Similar to Havells )

SITC 100A AHF Intelligent Power Factor Controller Static VAR Generator/Compensator rated at 50 KVAR Capacity 3 phase 4 wire- lT Connection- 01 Nos. 25 Sq.mm 4 Core AL armored cable @- 45 Rmt Gland Lugs @ 8 Nos .2.5 Sq.mm 6 core CT cable @ 45 mt Main panel Sensing CTs- 100/5 @- 3 Nos.

ELV WORKS

NETWORKING & TELEPHONE SYSTEM

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete

Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc. Complete

Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate

Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end

Supply, Installation testing, jumpering and commissioning 100 +100 Pair MDF Box with krone module

Supply, Installation testing and commissioning 50 Pair riser Cable with termination,punching & jumpering of telephone cable

Supply, Installation testing and commissioning 12U Wall Mount Rack.

Supply, Laying, termination & Commissioning of RG-6 TV CABLE

Supply, Installation, Termination & Commissioning of TV socket termination box with blank PVC cover plate and GI Box .

SITC RJ-4,Boot Cover

Providing & Fixing 6 Core MM FIBER Cable

Providing & Fixing LIU Loaded

Providing & Fixing Fiber Patch Cord

PA SYSTEM

SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories Make Honeywell

Supply of Booster Amplifier for PA system with RMS output (actual) 480 W . 480W,Power reduction on backup power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH

SITC of Speaker Cable 2 core X 1.5 sqmm shielded Audio cable. Legrabd Make

Supply, Installation of 12 U rack for PA system

Table Top microphone with mounting stand.

CCTV WORK

Supply, installation, esting and commissioning of 5 Megapixel Full HD Indoor Fixed Dome camera

Supply, installation, testing and commissioning of 5 Megapixel Full HD Indoor Fixed Bullet camera

Supply, installation, testing and commissioning of 4 Megapixel PTZ Camera , 30X optical & 16X digital Zoom

Supply, installation, testing and commissioning of 64 IP Channels NVR with 48TB Hard Disk

Supply, installation, testing and commissioning of 49 Inch UHD Monitor

Supply, installation, testing and commissioning 12U Rack wall Mounting

POE Edge Switch 8 Port

Supply, installation, testing and commissioning of 3KVA Online UPS

Supply,installation, laying and commissioning Cat 6 UTP cable

Pole for Camera

6 Core MM FIBER Cable

LIU Loaded

Fiber Patch Cord

FIRE ALARM

FIRE ALARM PANELS AND SOFTWARES

Supply, installation, testing and commissioning of 2 loop analogue addressable fire alarm panel with battery backup, it is a 318-point addressable fire alarm control panel with optional Digital Alarm Communicator / Transmitter and expandable to 636 addressable points with an optional second Signaling Line Circuit. Each loop support 159 detector & 159 devices.

Supply, installation, testing and commissioning ofZXrA Active Repeater Silence Mute Reset Accept Evacuate and Test Controls For use with DX control panels only use a 24 Vdc supply For use with ZX control panels use a 24 Vdc supply and an RS485 card 165 x 254 x 50 mm H x W x D(Make.- Honeywell Morley or Equivalent)

DETECTORS- MULTI SENSE DETECTOR

Supply, installation, testing and commissioning of Analogue Addressable twin chamber Photoelectrical typel Type, Above False ceiling mounted Smoke Detector with Mounting base.

Supply, installation, testing and commissioning of Analogue Addressable twin chamber Photoelectrical type, Below False ceiling mounted Smoke Detector with Mounting base.

Supply, installation, testing and commissioning of Analogue Addressable twin chamber Photoelectrical type, Below False ceiling mounted Multi Sensor with Mounting base.

Supply, installation, testing and commissioning of Analogue Addressable Type , ceiling mounted Heat Detector with Mounting base.

Supply, installation, testing and commissioning of analogue addressable Manual Break Glass unit-( Push-in Pull-down System) including the mounting box.

Supply, installation, testing and commissioning of analogue addressable Hooter.

Supply, installation, testing and commissioning of Response Indicator.

Supply and drawing of 2C x 1.5 Sq. mm Twisted copper FRLS Armoured cable fixed on the surface of the building structure complete with termination and testing as per requirement for detectors, break glass units and hooters to the fire alarm panel as required. Cable to be directly clamp it on wall, slab etc.

Supply, installation, testing and commissioning of analogue addressable fault isolation modules for Isolating shorted, dewired and loose circuits between two sucessive fault isolators with Auto reset arrangement as required.

Supply, installation, testing and commissioning of Addressable Control Relay Module for AHU, ACS, and integration of Customer Panels to the Building Panel ,complete as required. (QRO)

Supply & Installation of UPS / BATTERY of Exide co.

RODENT REPELLENT SYSTEM

Supply, Installation, laying & commissioning of VHFO v2 Controller (IDEMI and CFTRI certification , produce high decibel sound waves at very high frequency not less than 20 Khz , MS Powder Coated Stands , Graphical LCD display , UL and CE approved transformers for power supply. ) Make VHFO Digital LP 24 V2

Supply, Installation, laying & commissioning of Transducers (minimum at 400sft coverage each ) Make Maser Digital Model.

Supply, Installation, laying & commissioning of 2 core 0.5sq. mm , Flexible (14/40) SWG multistranded , Specially coated CT wires , Make - Nickon / Landmark / STD /equivalent Cables with conduit Make Nicone

KITCHEN EQUIPMENTS

Providing & Fixing 45-60 cm deep cupboard type storage unit made out of 19mm thick Mariane plywood of the requisite manufacture i.e.Anchor/Century/Kenwood/ Duro/Jet or equivalent generally confirming to I.S. 710 for frames, internal verticles horizontal divisions, shutters and 6mm & 12mm thick Mariane plywood with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with formica laminate sheet in approved pattern with grooves etc. and two coats of french polish with antitermite treatment to plywood including all leads & lifts etc. complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & Fixing of WORK COUNTER WITH SINK& BAIN MARE as per Design or Site Requirment or per Direction by Engioneer In Charge.

Providing & Fixing of HOT FOOD PICKUP COUNTER WITH BAIN MARIE &TRAY REST RAIL as per Site Requirment or as per Direction by Engineer In Charge

Providing & Fixing of Microwave Oven 42 L Capicity Samsung LG or Equivalent as per Direction by Engineer In Charge.

Providing & Fixing of 3 DOOR UNDERCOUNTER REFRIGERATOR W/ 9 DRAWERS 300 L Samsung Lg or Equivalent or as poer Direction by Engineer In Charge.

Providing & Fixing of FOOD warming appliance as per Site Requirment or as per Direction by Engineer In Charge.

Providing & Fixing of INDUCTION COOKING RANGE as per Site Requirment or as per Direction by Enginer In charge.

Providing & Fixing of DISH WASHER Samsung 24 Inch or Equivalent or as per Direction by Engineer In Charge.

Providing & Fixing of REACH-IN REFRIGERATOR as per Site Requirment or as per Direction by Engineer In Charge.

Providing & Fixing of BOTTLE REFRIGERATOR Samsung or Equivalent as per Site Requirment or as per DirectionBy Engineer In Charge.

Providing & Fixing of EXHAUST HOOD ABOVE COOKING COUNTER as per Site Rtequirment or as per Direction by EngineerIn Charge.

Providing & Fixing of STORAGE RACK as per Site Rtequirment or as per Direction by EngineerIn Charge.

Providing & Fixing of STORE ROOM SHELVING as per Site Rtequirment or as per Direction by EngineerIn Charge.

Providing and Fixing Kitchen Trolley stainless steel kitchen trolley of overall 26" height and 22"depth ,supported on aluminium pipes, trolley basket made out of 5mm stainless steel rod fitted on telescopic channel of size 1.5"x20"x22" on both side softrolley of 12" or above size, panel having 40 Kilogram load bearing capacity of trolley made out of 20mm PU Ccoated plywood and colour combination as directedbyE-I-C. Inner side of panel covered by white mica, 100 mm s.s.decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer-in-charge)

Providing & Fixing of SS RACK -5 Shelve 44x20x66 as per Site Requirment or as per Direction By Engineer In Charge.

Providing & Fixing of DUNNING RACK / PALLATE SS SQUARE TUBE48x24x6" as per Site Requirment oras per Direction By Engineer In Charge.

Providing & Fixing of ONION POTATO 48x24x34 as per Site Requirment oras per Direction By Engineer In Charge.

Providing & Fixing of POT RACK 4 SHELVE , SS SQUARE TUBE 48x24x66 as per Site Requirment oras per Direction By Engineer In Charge.

Providing & Fixing of SS GRATING as per Site Requirment oras per Direction By Engineer In Charge.

Providing & Fixing of SS HOOD - 202 GRADE WITH INSTALLATION as per Site Requirment oras per Direction By Engineer In Charge.

Kitchen fresh air system

Providing & Fixing Cabinet type fresh air fan 350 cfm / 20mm static with filter (additional 2 filters) as per Site Requirment oras per Direction By Engineer In Charge

Providing & Fixing GI ducting Without insulation as per Site Requirment oras per Direction By Engineer In Charge

Providing & Fiving of Cable tray (300 mm x 75 mm) without of Support as per Direction by Engineer In Charge.

Supply, installation, testing and commissioning air curtain of 6 feet width having air throw velocity of 21 m/sec,low noise level up to 38 to 46 dB suitable for door height upto 9 feet, working on 1ph, 230 V, 50Hz, A.C. supply

Providing & Fixing Strip light- Supply, installation, commissioning of Encapsulated flexible, IP 65, CCT 5000K, 10W/M, with efficient thermal management. Make - Wipro or Equivalent, LS27-005-120-30-50

FIRE FIGHTING SYSTEM

FIRE HYDRANT SYSTEM (RISER) RESID

Providing & Fixing Weldable G.I. Pipe C Class having ISI Mark Make Jindal /Appollo.

Fitting Material Like Flanges,nut bolt,gaskit,elbow,nipples etc of Fire Fighting Piping and Sprinkler as per Site requirment or as per Direction by Engineer In Charge.

Supply Installation Testing & Commissuioning of Air Valve 25 NB at terrace with ball valve as per Site Requiremnt or as per Direction by Engineer In Chargwe.

Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

Butterfly Valve 100 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

Single headed fire hydrant valve 63 mm dia inlet & outlet and flange dia 185 mm as per IS : 5290 having ISI Mark Make Essel/Arihant/Equvt.

Fire Hose Box - Single M.S. fabricated box made out of 18 swg suitable to accommodate one fire hose pipe of 15 mtr long & one branch pipe having front glass door with panel lock & key Saibaba Make.

Fire Hose Pipe of 63 mm dia & 15 mtr long with male & female S.S (Essel/Arihant) coupling as per ISI 903 duly binded with G.I wire having ISI Mark.

Providing & Fixing of Branch Pipe S.S 2 1/2" dia with nozzle having ISI Mark Make Arihant/Equvt Make. As per Site Requirment or as per Direction by Engineer In Cahrge.

Providing & Fixing of Hose Reel - wall mounted M.S. fabricated drum with 3/4" rubber hose pipe & 30 mtr long ISI Make with nozzle our Saibaba Make as per Site Requirment or as per Direction by Engineer In Charge.

Supply Installation Testing & Commissioning of 20 mm ball valve as per Site Requirment or as per Direction by Enineer Incharge.

COURTYARD HYDRANT SYSTEM

Providing & Fixing Weldable G.I. Pipe C Class having ISI Mark Make Jindal /Appollo.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Fitting Material Like Flanges,nut bolt,gaskit,elbow,nipples etc as oper Site Requirment or as per Direction by Engineer In Charge.

Butterfly Valve with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

150mm dia

Supply installation testig & Commissioning of Tar wrapping for underground pipe with primer( As Per Side CondiationB OR AS PER Direction by Engineer In Charge.

Supply installation testig & Commissioning of Single headed fire hydrant valve 63 mm dia inlet & outlet and flange dia 185 mm as per IS : 5290 having ISI Mark Make Essel/Arihant/Equvt. As per Site Requyirment or as per Direction by Engineer In Charge.

Supply installation testig & Commissioning of Fire Hose Box - Single M.S. fabricated box made out of 18 swg suitable to accommodate one fire hose pipe of 15 mtr long & one branch pipe having front glass door with panel lock & key Saibaba Make. As per Site Requirment or as per Direction by Engineer In Charge.

Fire Hose Pipe of 63 mm dia & 15 mtr long with male & female S.S (Essel/Arihant) coupling as per ISI 903 duly binded with G.I wire having ISI Mark.

Supply installation testig & Commissioning of Branch Pipe S.S 2 1/2" dia with nozzle having ISI Mark Make Arihant/Equvt Make.As per Site Requirment or as per Direction by Engineer In Charge.

Supply installation testig & Commissioning of Four way inlet breaching with 4 Nos. of male NRV ISI mark Make Arihant. As per Site Requirment or as per Direction by Engineer In Charge.

FIRE PUMPS & EQUIPMENT,

Supply installation testig & Commissioning of Electric Star delta control starter suitable for the above pump Make L & T Siemens/Equvt as per Site Requirment or as per Direction by Engineer In Charge

Supply installation testig & Commissioning of Cable 3 core ,35sq mm Aluminium Armourd Cable for above pump from motor to starter Ashoka/ Ashoka/Equvt as per Site Requirment or as per Direction by Engineer In Charge

Pressure guage 4" dia with cock & syphon pipe

Supply installation testig & Commissioning of Pressure Switch as per Site Requirment or as per Direction by Engineer In Charge

Supply installation testig & Commissioning of Air Valve 25 NB with ball valve s per Site Requirment or as per Direction by Engineer In Charge

Butterfly Valve with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

150 mm dia

100 mm dia

Supply installation testig & Commissioning of 25 mm dia BALL VALVE as per Site Requirment or as per Direction by Engineer In Charge

Wafer type Non return valve Marc/Ganesh/Normex/Equvt

150 mm dia

100 mm dia

Supply and Installation of approved makes FOOT VALVE to with necessary bolts, nuts, gaskets, packing complete open/shut position duly indicated as approved by ISI etc. completed.

150 mm dia

100 mm dia

Weldable G.I. Pipe C Class having ISI Mark Make Jindal /Appollo.

150 mm dia

100 mm dia

25 mm dia

Labour Charge

Fitting Material Like Flanges,nut bolt,gaskit,elbow,nipples etc

Providing & Laying Water Tank 50000 ltr

Pump Room

Erection of Pump Room Diesel Pump, with Diesel Tank Fuel Piping, Main Pump and Jockey Pump along with accessories and Cabling, and Electrical control Panel

c ) Excavtion in Hard rock

PCC 1: 4 : 8 for Above Ground Pipe Support with " U " Clamp

Providing and laying Design-Mix Reinforced Cement Concrete foundation for various pumps of M-20 by weight batching using graded stone aggregate of 20 mm maximum size including mechanical mixing and vibration, consolidation, finishing, curing etc. as specified and also including dewatering, if any, cost of form work, shuttering & steel reinforcement, including nozing all around by 50 x 50 x 5 mm angle.

FIRE SPRINKLER SYSTEM

Weldable G.I. Pipe C Class with necessary fittings,brackets, nut & bolts,flanges,gasket &painting having ISI Mark Make Jindal/Surya/Appollo.

40 NB Drain Pipe

Fitting Material Like Flanges,nut bolt,gaskit,elbow,nipples etc

Pendent Sprinkler

SS Flexibel Drope 1500mm/ 1200mm Length

Butterfly Valve 80 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

100 mm dia

32 mm dia Ball Valve

Fire Extinguisher

Providing and fixing fire bucket and stand as per site requirement or as per directed by engineer in charge.

ABC type of Fire extinguisher of 6 Kg cap. complete ready for use as per IS 2171 having Mark Seasfire

Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire

ARCHITECTURE, DESIGNING & DRAWINGS

Godrej and Boyce Mfg Co Ltd