Loading…
Loading…
Tender Value
₹35.0 L
EMD Value
₹35,000
Closing Date
13 Jul 2026, 9:30 pmClosed
Karnataka Power Corporation Limited
Shankar S.L
Modification of Kitchen room to permanent residential buildings in Ambikanagar colony
KPCL/2026-27/BD/WORK_INDENT4369
KPCL/2026-27/BD/WORK_INDENT4369
Reserved
Buildings
Two Tender Document System(Two Cover)
KPCL Executive Engineer Colony Office KVP Nagjhari
14 documents required · 14 mandatory
Work experience: The intending bidder should have satisfactorily completed as a prime contractor in the last five financial years (i,e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26), at least one civil work to an extent of 25% of the cost of work of value not less than Rs. 8.75 lakhs. The work done certificate issued from state / central Government / Government under taking from officers not below the rank of Executive Engineer or equivalent cadre shall be furnished. (Weightage of 10% per year will be given to the cost of completed works of previous years to bring them to the price level of present financial year).
Assessed available tender capacity (AxNx5-B) should be greater than the amount put to tender, where, A - Maximum value of works executed in any one year during the last five years (updated to 2026-27) price level taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited for 4 Months ( 0.33 year). B- Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 4 Months.
Financial turnover: The intending bidder should have achieved in at one financial years minimum financial turnover of Rs. 34.97 lakhs in the last five financial years (i,e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). Turnover certificate duly certified by the chartered accountant shall be furnished. (Weightage of 10% per year will be given to the financial turnover of previous years to bring them to the price level of present financial year).
Valid KPWD Class III & above registration certificate
Duly filled qualification information as per section-3 along with supporting documents
Income Tax PAN
GST Registration certificate
Independent PF code registration certificate.
Declaration I attached to bid document.
Declaration II attached to bid document.
Declaration III attached to bid document.
Declaration IV attached to bid document.
Valid Schedule Caste certificate issued by competent authority.
Valid Domicile certificate for a period of 10 years.
Declaration V attached to bid document-Offer towards sale of released scrap materials
₹880
₹35,000
29 Jun 2026
29 Jun 2026
14 Jul 2026
11 Jul 2026
Modification of Kitchen room to permanent residential buildings in Ambikanagar colony
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Removing of existing old Sanitary and plumbing pipelines, stacking and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unlo...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position Mathi/Nandi wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 30mm. thick, 75mm wide in two halves with panels ...
Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.
Providing & fixing steel windows and ventilators with 24 gauge thick fly proof mesh, frame and shutter sections made of extruded/ pressed steel sections cut to length, joints mitered and ectrically bu...
Providing and fixing 100 x 50 mm 10 gauge non-galvanized weld mesh to concrete / masonry surface including cost of all materials, machinery, labour, fixing weld mesh to exposed reinforcement bars or b...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including ainting of fittings and brackets, cutting and making go...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Providing and fixing Cuddappah slab 2.5cms thick for inspection chamber cover
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 75mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.100x58x1.9mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Aldrop 16mm dia, 300mm
Providing & applying of anti-corrosive paint coating to old reinforcement & applying of epoxy bonding agent to the old slab exposed surface, which acts as bonding agent to the new slab, including cost...
Providing & laying in position ready mix micro cement concrete in reinforcement, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated for all works in ground floor level for roof...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Kitchen -KW2 -SC.doc
Tender Document • 1.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .