REPAIRS TO JOINERY, ALUMINIUM PARTITION, ROOF TREATMENT, SANITARY FITTINGS, SUNKEN FLOORS, PATHS, WATER TANK CLEANING AND OTHER CONNECTED REPAIRS WORKS TO CERTAIN BLDG AT DSC DRDL, GE OFFICE COMPLEX, CHESS AND MES COLONY UNDER AGE B/R-I HYDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n exc 1.5 sqm each, complete all as specifed and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 and n exc 4.0 sqm each, complete all as specifed and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each from PVC/wooden frame.

S/F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed. Make RAJSHREE / Sintex

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specifed and as directed. Make :- RAJSHREE / Sintex

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 2nd class hard wood 35 mm thick factory made plain, framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces The size of rail and stile as per IS :1003 (part 1), kiln seasoned and chemically pressure treated including taking down the old shutter of area n.exc 2 Sqm each complete all as directed.

S & F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels covered both face with 0.9 mm thick decorative face veneer with lipping / frame to match complete

S & F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels covered commercial type on both sides complete.

S&F 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass / glaze etc (without sash bars), edges of framing plain/ chamfered or rounded. Fitted with cut and mitered beads for securing glass etc: sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) including taking down old shutter of area not exc 2 Sqm each complete all as directed.

M&L prelaminated particle board 19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling old existing boarding along with iron / aluminium mongery complete all as directed.

M&L in repairs particle board 19mm thick, interior grade, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified.

S&F in repairs 2nd class hard wood plain fillets, area exceeding 6 Sqcm but not exceeding 13 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as directed.

S&F in repairs continuous (piano) hinges of flap width 30mm, mild steel, bright finish or electo galvanised complete all as directed.

S&F Powder coated (thickness powder coated not less than 50 micron) aluminium door shutter with frames, aluminium section weighing 0.55kg/mtr incl necessary joinig clits,glazing clips rubber neoprene packing,handles 2nos in each door, hinges,anodised aluminium snap beading screws, 5.5 mm thick sheet galss with 25 micron sun control film, 12mm thick particle board prelaminated decorative both side, 6 levers lock etc,including takingdown old unserviceable old any type of door complete all as specified and directed Make :- Jindal / Hindalco

S&F in repair rectangular aluminium hollow section, powder coated of approved colour not less than 50 micron thickness, of size 101.60 mm x 44 mm x 2 mm thick as in partition including fixing with suitable size of nuts, bolts in floors and walls by drilling holes, both vertical and horizontal members including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium legs, aluminium galzing channel,beading, complete all as specified and directed. Make :- Jindal / Hindalco

S&F powder coated aluminium grills of weight between 2.5 to 3 kg/sqm to aluminium window etc incl taking down old grills complete all as directed. Make :- Jindal / Hindalco

S&F venetion blinds (vertical type) of 100 mm wide strips with aluminium frame and all fittings (to be matched with existing patterns) & taking down old venetion blinds complete all as directed. Make:- VISTA/ LEVADOR

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle including dismantling old ventilators complete all as specified

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded including dismantling old window all as specified

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bars including dismantling old window complete all as specified

S&F in repairs factory made uPVC colour two track , two panels sliding windows frame 52 x 44mm & sash 32 x 60mm both having wall thickness of 1.9 +- 0.2mm and single glazing beads of appropriate dimension comprising of uPVC multi chambered frame , with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 +- 0.2mm thick galvanised mild steel section made from roll forming process of required length ( shape & size according to uPVC profile), appropriate dimension of uPVC glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zic alloy ( white powder coated) touch lock with hook , zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg), GI fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealnt over backer rod of required size and of approvied quality including fixing of 5mm thick tinted glass / SS wire mesh to shutters, complete all as specified and directed

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete Make :- Classic / Prestige

S&F in repairs mild steel butt hinges, medium weight cold rolled of size 100mm complete all as directed. Make :- Classic / Prestige

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete. Make :- Classic / Prestige

S&F in repairs 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as directed. Make :- Classic / Prestige

S&F 150mm size extruded aluminium alloy handles fabricated type anodized complete all as directed. Make :- Classic / Prestige

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodized complete all as directed. Make :- Classic / Prestige

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section complete all as directed. Make :- Classic / Prestige

S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section complete all as directed. Make :- Classic / Prestige

S&F in repairs 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as directed. Make :- Classic / Prestige

S&F floor/door stopper of aluminium alloy body and tongue, anodised, with hand drawn steel spring, single legged complete all as directed Make :-Hardwin/ Ozone

S&F in repairs floor/door stopper of aluminium alloy body and tongue, anodised, with hand drawn steel spring, single legged complete all as directed Make :-Hardwin/ Ozone

S&F in repairs MS single action hinges of 100mm size including welding to chowkats complete all as specified Make :-Everite / Ozone

S&F in repairs mortice lock, 4 levers vertical type size brass size 75mm complete all as specified Make:- Godrej / Harrison

S&F in repairs hasp and staple of 100mm size , safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. Make:- Crown / Classic

S&F in repairs curtain rod, mild steel chromium plated 19mm dia with fixing brackets, stops, rollers etc complete all as specified and directed. Make:- Vista / Levador

S&F in repairs aluminium ( Die cast) body door closer hydraulically regulated designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complelte all as specified and directed. Make :- Godrej /Everite / Hardwin

S&F stainless steel wire cloth, 0.36mm nominall dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominall dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples wooden beeding / putty complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and S&F plain sheet glass of 3 mm thick ordinary quality and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed. Note: Work has to be carried out upto 5th floor. Make:- Modiguard / Saint gobain

Hacking out old broken glass (any thickness, size quality or description) from wood /steel frame glazed with oil putty or fixed with beads and S&F 3 mm thick frosted glass and glazing with oil putty and clips in squares not exceeding 0.50 Sqm in each pane complete all as directed. Note: Work has to be carried out upto 5th floor. Make:- Modiguard / Saint gobain

Securing glass of any description in existing metal frames glazed with putty / beads including removing loose or decayed putty / beads, painting / oiling one coat on rebates, grooves, reputting and painting / oiling puttied surfaces to match existing work complete all as specified and directed.

S&F in repairs 5.50mm thick glass of colour/ tinted pattern in square / rectangular in aluminium door / window, wooden door and wall panelling complete all as specified and directed Make:- Modiguard / Saint gobain

S&F 3mm thick plain gass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete Make:- Modiguard / Saint gobain

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete Make:- Modiguard / Saint gobain

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width/girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or grith,and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws including dismantling old sheet complete all as directed. Note for item Nos.1 to 6:- (i) Work shall be carried out upto 5th floor (ii) Quoted rates are deemed to be inclusive of necessary scaffolding

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as in ridges including dismantling old sheet complete all as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations / 10 cm side lap fixed with shelf tapping screws and washer in roof, wall etc including dismantling old sheet complete all as directed

S&F 2mm thick fibre glass reinforced translucent plain sheeting with two corrugations / 10 cm side lap fixed with shelf tapping screws and washer in roof, wall etc including dismantling old sheet complete all as directed

Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish to a distance exceeding 500m but not exceeding 1000m and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete specified and directed.

M&L providing plain cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) in roof padding, kerb or mud stop, rounded or chamfered on edges to maintain proper slope on roof slab complete all as specified.

M&L for brushing neat cement slurry with 3 Kg of cement per Sqm over the RCC slab and sides complete all as directed.

M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed. Note : WPC will be measured under separate item of this schedule.

Supply only intergal water proofing compound ISI marked Make: Dr. Fixit/CICO/PEDILITE

M&L water proofing treatment with APP base polymeric membrane of minimum weighing 3.50Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof complete all as specified and directed.

M&L for cutting grooves in brick wall 70mm wide and 65mm deep and sweeping horizontal face of groove with cement mortar (1:3) and making good in CM 1:3 after inserting membrane into the groove complete all as specified and directed.

M&L for preparation of surfaces of any description, over 10cm in width or girth otherwise described and applying two coat of aluminium paint @100ml per sqm over APP membrabe sheet complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ( upto 15 mtr height of bldg) type 'B' ISI marked of 110mm bore complete all as specified

S&F in repairs PVC (SWR) bends 110mm dia of any radius complete all as specified

Disconnecting existing water tank of capacity 500 to 1000 ltrs setting aside (or lowering if required) for repairs, cleaning etc , repairs of platform and hoisting if required reconnecting and re- fixing in position complete all as specified.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement including taking down existing plaster complete all as specified Note for item Nos.65 to 68:- (i) Work shall be carried out upto 5th floor (ii) Quoted rates are deemed to be inclusive of necessary scaffolding

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement including taking down existing plaster complete all as directed.

M & L rendering 10 mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement including taking down existing plaster complete all as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including taking down existing plaster complete all as directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars, ladders, framed balusters , walk ways, railing, framework or water tank and similar work conforming to Fe- 290 Gde E-165 including dismantling MS work complete all as specified

M&L GI snap grid frame work for false ceiling grid size 605 x 605mm with runners aluminium anodised main Tee of section 35 x 35x 1.5mm thck, cross Tee of section 25 x 25 x 1.5mm thick and aluminium anodised angle of size 25mm x 1.5mm thick section fixed along side of wall including hanging from ceiling with 6mm dia GI ( upto 1200 mm length ) adjustable level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long etc 12mm thick Gypsum board to ceiling grid and two coats of OBD including taking down old false ceiling work complete all as specified.

S&F in repairs Gypsum, Perforated particle board, AC sheets ceiling tiles of size 600mm x 600mm of any type , thickness fixed to grid with suitable clips, screws etc including painting with existing tint/ finish complete all as specified.

M&L in repair, fixing false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and including demolition of complete ceiling as per direction.

Periodical inspection of rolling shutters, checking various parts, greasing/oiling as required to make smooth operation of the rolling shutters by using gear/hand operated including make proper alignment, fixing screw, nut & bolts for fixing loose parts all as specified n.exc 7 Sqm area complete all as directed. Note : Replacement of parts shall be measured and paid separately.

S&F rolling shutter lathe of 1.25mm thickness including taking down damaged shutter slots.

S&F MS springs suitable for rolling shutters of any size complete incl taking out old one all as directed.

S&F in repairs ball bearing suitable for rolling shutters of any size as ordered complete all as directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete

M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete in sunken floor including demolition of old PCC work all as specified

M&L applying hot bitumen blown type 85/25 grade two coat on concrete/plaster surfaces at the rate of 1.5Kg per Sqm per coat in suken floor complete all as directed

M&L rendering 15mm thick on fair faces of brick work or concrete surface in two layers ( 5mm thick in CM 1:4 over 10mm thick in CM 1:4) finished mixed with water proofing compound @ 3 % of cement by weight on top layers. Note :- WPC will measured and paid separately.

M&L Non skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including laid over 15mm thick screed bed in CM 1:6 including demolition of old tiles with screed complete all as specified and directed.

M&L Non skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including laid over 15mm thick screed bed in CM 1:6 including demolition of old tiles with screed complete all as specified and directed.

M&L for non skid ceramic tiles of 7 to 8mm thick square / rectangular area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm as in vertical surface etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with the colour of the tiles over and including10mm thick backing coat in cement mortar 1:4 backing coat including demolition of old tiles with screed complete all as specified and directed.

M&L for glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado ,jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 as backing coat including demolition of old tiles with screed complete all as specified and directed.

M&L for glazed ceramic tiles of size 300 x 450 x7mm thick on vertical surfaces such as skirting/dado ,jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 as backing coat rendering including demolition of old tiles with screed complete all as specified and directed.

S&F vitrified tiles 10mm thick any shade (Square/rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc laid in floor , set and jointed with 15mm thick screed bedding in CM 1:6 and pointed in white cement or coloured cement to match with colour of tiles including demolition of old tiles with screed complete all as specified and directed.

All as per item No. 86 here-in-before but on vertical surfaces such as skirting (Skirting is to be flush with wall) including taking down old terrazo tiles and plaster and 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as backing coat for tiles including demolition of old tiles with screed complete all as specified and directed.

S&F vitrified tiles 10mm thick dark shade (Square/rectangular) polished area of each tiles exceeding 0.36 sqm but not exc 0.42 Sqm in floors etc laid in floor , set and jointed with 15mm thick screed bedding in CM 1:6 and pointed in white cement or coloured cement to match with colour of tiles including demolition of old tiles with screed complete all as specified and directed.

All as per item No 88 here-in-before but on vertical surfaces such as skirting (Skirting is to be flush with wall) including taking down old terrazo tiles and plaster and 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as backing coat for tiles including demolition of old tiles with screed complete all as specified and directed.

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed.

S&F in repairs cast iron floor trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified & as directed.

S&F in repairs 75mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches complete all as specified and directed.

S&F in repairs 100mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches complete all as specified and directed.

S&F in repairs 100 mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed on walls complete all as specified and directed.

S&F in repairs 75 mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed on walls complete all as specified and directed.

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mm x 440mm with integral foot rests ( excluding flushing cistern and flush pipe ) complete including connection to trap and flushing pipe antisyphonage pipe etc Make :- CERA / HINDWARE/PARRY WARE

S&F in repair vitreous china water closet Indian type 580mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of cement concrete bedding including connections to flushing cistern / pipe and making good disturbed portion to match with existing surface complete all as directed. Make :- CERA / HINDWARE/PARRY WARE

Demolition of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550 x 400mm flat back excluding taps, waste china and plug but including brackets, CP waste fittings 32mm dia including cutting for and pinning in ends of brackets or erecting stand complete in repair. Make :- CERA / HINDWARE/PARRY WARE

S&F in repairs counter top ( self rimming) wash hand basin white or colour tucked in granite slab including 15mm dia cast copper alloy chromium plated fancy type pillar cock, suitable PVC connection, PVC waste pipe and CP brass waste fittings complete all as specifiedand directed by Engr -in-Charge. Make :- CERA / HINDWARE/PARRY WARE

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets. Make :- CERA / HINDWARE/PARRY WARE

S&F in repairs 10 ltrs capacity PVC flushing cistern low level with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed. Make :- CERA / HINDWARE

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed. Make :- Prayag / Poly Tough

S&F in repair PVC connection 15mm dia 600mm long with 2 Nos brass check nuts with washer complete all as specified Make :-Prayag / Poly Tough

S&F in repairs chromium plated jet spray Health faucet with aprox 1 meter shower tube and clamp complete all as directed. Make :-Prayag / JAGUAR

S&F in repairs grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as directed. Make :- Prayag / Poly Tough

S&F in repairs CP grating of size 100/110 mm including fixing with white cement complete all as directed. Make :- Prayag / Poly Tough

S&F in repairs plastic water closet seat, cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging devise complete all as directed. Make :- Prayag / CERA

S&F in repairs syphon set suitable for PVC low level flushing cistern of any type complete all as directed. Make :- Prayag /CERA / Poly Tough

S&F in repairs handles suitable for PVC low level flushing cistern of any type complete all as directed. Make :-Prayag /CERA / Poly Tough

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed. Make :- Leader / SEIKO

S&F in repairs stainless steel sink of 1.0mm thick for kitchen with out drain board of overall size 495x420mm and bowl size of 410x330mmx160mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed. Make :- NIRALI / ANJALI / JAYNA / Prayag

S&F in repairs stainless steel sink of 1.0mm thick for kitchen with drain board of overall size 915x460mm and bowl size of 410x330mmx160mm including plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed. Make :- NIRALI / ANJALI / JAYNA / Prayag

S&F in repairs white vitreous china laboratory sink of size 600 x 450 x 200mm with plugs, washers and wastes including beding in cement mortar on to dwarf walls, or incluidng fixing cantilever brackets and connecting union to waste pipe complete Make :- CERA / HINDWARE/ Parry Ware

S & F in repair stainless steel kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws all as directed. Make :- NIRALI / ANJALI / JAYNA

S&F in repairs tubular towel rails chromium plated, 20mm dia, 'D' type 60cm long between flange complete all as specified and directed. Make :- Prayag / ZINITH / HINDWARE

S&F in repair box type mirror PVC cabinet of size 300 x 450 x 150mm all as specified Make :- Prayag / Hindware / Jacqure

S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc., including taking down existing old GI tubing complete all as directed. Make :- TATA / Jindal

S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc., including taking down existing old GI tubing complete all as directed Make :- TATA / Jindal

S&F in repairs fancy type 15mm dia pillar tap standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed. Make :- Prayag / Poly tough

S&F in repairs 15mm dia angle stop valve of PTMT any colour, high pressure, screwed for iron pipe (minimum weight 90gms) complete all as directed Make :- Prayag / Poly tough

S&F in repairs 15mm dia bib tap with standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms) complete all as directed. Make :- Prayag / Poly tough

S&F in repairs chromium plated, fancy type 15mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as directed. Make :- Seiko/ Prayag / CERA

S&F in repairs 15mm dia pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as directed. Make :- Seiko / Prayag / CERA

S&F in repairs chromium plated, fancy type 15mm dia stop valves /angle cock / concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as directed. Make :- Seiko / Prayag / CERA

S&F in repairs Classic 2 in 1 Bib Cock of 15mm dia with wall flange specifications complete all as directed. Make :- Seiko / Prayag / CERA

S&F in repairs 15mm dia swan neck taps of 15mm dia, cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed. Make :- Seiko / Prayag / CERA

S&F in repair wall mixture cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified and directed. Make :- Seiko / Prayag / CERA

S&F in repairs sensors complete set including pillar taps of suitable size to exisitng including taking down existing wash hand basin and refixed in same place and incl all necessary fixing arrangements all as specified and directed

S&F in repairs complete set urinal sensors of suitable size to exisitng including taking down existing urinal and refixed in same place and incl all necessary fixing arrangements all as specified and directed

S&F in repairs chromium plated waste coupling of size 32/38mm for kitchen sink/ WHB of any size complete all as specified and as directed Make :- Prayag / CERA

S&F in repairs 32mm/38mm PVC waste pipe for WHB,& sink etc complete all as specified and as directed

S&F in repair of chromium plated overhead shower with revolving joint and 125mm long shower arm with wall falnge 15mm bore fancy type any colour complete all as specified Make :- Seiko / Prayag / CERA

S&F in repair CP brass bottle trap 32mm dia including joining to waste fitting and waste pipe complete all as directed Make :- Seiko / Prayag / CERA

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete Make :- Prayag / CERA

S&F in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) double layered of 1000 ltr capacity hoisted fixed in position complete all as specified in SSR Part-I. Make :- Sintex / Polycon

S&F in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) of 750 ltr capacity, double layered, hoisted, fixed in position complete all as specified in SSR Part-I. Make :- Sintex / Polycon

S&F in repair rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) of 500 ltr capacity, double layered, hoisted, fixed complete all as specified in SSR Part-I. Make :- Sintex / Polycon

S&F in repairs Symet ball valve 20 mm dia with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight of 210 gms), complete all as directed. Make :- Prayag / Zoloto / Leader

S&F in repairs Symet ball valve 25 mm dia with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight of 210 gms), complete all as directed. Make :- Prayag / Zoloto / Leader

S&F in repairs PVC water tank covers of any size & capacity complete all as directed. Make :- Sintex Polycon

S&F in repairs stainless steel grade 304 railing round / sqare pipe 50mm dia for hand / bottom rail, posts and 16mm dia horizontal rails including 6 mm thick toughned glass in between posts & top or bottom rail complete with all fittings / fixture all as specified

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying one coat of white wash all as specified and directed

M & L for preparation of old plastered or unplastered decorated surfaces and applying one coat of white wash on ceiling

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distempering complete all as specified and directed.

M&L for complete removal of existing treatment of walls/ ceiling, washing with water and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT

M&L for preparation of old descorated plastered / unplastered surfaces of walls, soffits of chajja, cornices etc and applying one coat of cement base paint upto three storey building including scaffloding arrangement all as specified.

M&L for preparation of old surfaces of walls / chajjas and applying one coats of weatherproof antifungal exterior paint complete all as specified and directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M & L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed

M&L for preparation of old treated surfaces of wooden surface of any description over 10 cm in width or girth applying one coat of varnishing includng wood filler complete all as specified

M&L preparation of old surfaces of bricks, stone, concrete of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete

M&L in repairs transparent 3mm thick polycarbonate sheet translucent corrugated / plain sheeting with two corrugation side lap fixed with shelf tapping with washers etc in roof/wall complete all as specified

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint to match with the existing wall surfaces complete all as directed

De sludging and cleaning of existing manholes ( excluding Ist manhole) of any size and shape exc 0.50 mtr but not exc 1.0 mtr depth by removing all sludge, waste, debris etc from man holes and cleaning with water incl disposing off all sludge, waste , debris etc outside MD land all as specified

De sludging and cleaning of existing manholes ( excluding Ist manhole) of any size and shape exc 1.00 mtr but not exc 1.50 mtr depth by removing all sludge, waste, debris etc from man holes and cleaning with water incl disposing off all sludge, waste , debris etc outside MD land all as specified

Cleaning of existing sewage lines of 100mm dia from manhole to manhole by manual rodding and remove all sludge, waste, debris etc from line and flushing with clean water complete all as specified and as directed.

Cleaning of existing sewage lines ( beyond 1st manhole) dia of pipe line 150mm from manhole to manhole by manual rodding and remove all sludge, waste , debris etc from line.

Cleaning of Gully traps of any size and any depth by removing the material (sludge materials) and placing back the manhole cover in Position complete all as specified and as directed.

Removing of blockage from 'S' trap/'P' trap/ Nahani trap/floor trap by flushing or by sucking by suction pumps at GF/Ist/IInd/ IIIrd floor including cleaning the line upto first man hole complete all as specified and as directed.

Clearing the urinal blockage of any length and dia by rodding and removing the materials (sludge) to a distance not exceeding 50m complete all as specified and as directed.

Cleaning of Septic tanks of 100 to 150 users capacity by dewatering all the water by using sewage sucking tractor/ truck , taking out the sludge/ night soil, in order to remove all stacked mud/sludge etc., cleaning the chocked inlets, outlets of septic tanks, removing all the sludge outside MD land, complete all as specified and as directed.

Desilting / cleaning of existing drains size 30 to 60cm width and average depth in any width and depth , condition (including foul conditions) with necessary dewatering and temporary diversion of drain water as required and removing sludge / soil, debris etc out of MD land complete all as required.

Excavating in trenches n. exc 1.5m wide and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

All as per item No. 166 here-in-before but depth exc 1.5m and n.exc 3.0m complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing Excavated soils exceeding 1.5 KM but not exceeding 5 KM and depositing where directed.

M & L for 150mm dia salt glazed stoneware drain pipe of grade 'A' laid in trenches and jointed in cement mortar (1:2) including demolition of old pipe with haunching complete all as specified and as directed

M & L for 200mm dia salt glazed stoneware drain pipe of grade 'A' laid in trenches and jointed in cement mortar (1:2) including demolition of old pipe with haunching complete all as specified and as directed

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200mm bore.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including raising height of existing manholes including demolition of old brick work complete all as specified and as directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 including demolition of old brick work complete all as specified and as directed.

M&L plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work including demoltion of old concrete complete all as specified and as directed.

M & L plain Cement Concrete1:4:8 type D-2 (40mm graded stone aggregate) in foundation filling and mass concrete including demolition of old concrete complete all as specified and as directed.

M&L PCC 1:2:4 type B1, using 20mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement including demolition of old concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc.

Demolition of reinforced cement concrete in ground floors and pavings, cover slabs not exceeding 15 cm thickness, (Below or above ground level), as directed by the Engineer in Charge.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L Mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Cutting into existing manholes/ septic tank for connecting new drains making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished and reforming benching as required for 150mm bore pipe

M&L for walling of square rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:4 including demolition of old stone work complete all as specified

M&L for walling of squre rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:6 including demolition of old stone work complete all as specified

All as item No.185 above, but except stones

M & L for Raised pointing to random rubble masonry coursed or brought up to courses in cement mortar 1:3 complete all as specified.

Raking out joints to square rubble masonry, coursed or uncoursed and M & L for Raised pointing in CM 1:3 complete all as specified.

S & F in repairs, Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., including taking down the existing wire complete as directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete including dismantling of steel work complete all as specified

M&L machine pressed paving cement concrete tiles 30cm x 30cm x 20mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6 incluidng dismantling existing floor tile of any description complete all as directed. Make for item No.103 & 104:- CLASSIC/ DECO/SPECTRA or equivalent approved

M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles and screed bed complete all as directed

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base of floor, pavement all as specified including demolition of old concrete complete

M&L plain cement concrete Type B2, 1:2:4 (40mm graded aggregate) 100mm thick as in paths, hardstanding, parking etc finishing cement concret surface even and smooth without using extra cement complete including demolition of existing concrete

S&F in repairs aluminium sliding / openable shutter with 6mm thick frosted / toughened glass including necessary bearing, roller and hinges to existing aluminium frame complete as specified

S&F in repairs multicolour double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc complete all as specified. Make :- Vista / Levador / Amar

Providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement , 3 coarse samd) including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm) includng making drainage opening wherever required including demolition of existing kerb stone complete all as specified

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M & L for dismantling of Chain link fencing of any thickness complete all as directed

S & F chain link fencing of any type n exc 3.0 kg per Sqm including line wires, any mesh, size and type of standards, rails, straining bolts, etc., including provision of binding wire.

sri vishnu enterprises