GE/BAS-68/2022-223 Repair to wall fencing drains path culvert Gate and joinery plumbing

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonry, etc and making good disturbed ground complete all as specified and directed

Dismantling of fencing wire mesh any types complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and as directed.

Excavation in post holes (or similar holes) in any type of soil n. exc. 0.50 cum and getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25 cm watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L cement concrete type C-2, (1:3:6) (using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete, complete all as specified and as directed.

Supply only mild steel galvanized chain link fencing including line wires any mesh size 50x50x3 mm and any type of standards , nails, straining bolts, etc including provision of binding wire and nut-bolts, flats etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and as directed.

M&L precast cement concrete Type B-1,1:2:4 (20 mm graded stone aggregate ) set in cement mortar 1:4 as in manhole covers including Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repair galvanized 2 strand steel barbed wire 2.24mm dia with 2mm dia barbs at 75 mm spacing’s and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

Restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 including Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

All as per above item here in before but except bricks complete all as specified and directed.

M&L for framed work as in door, gate of angle or other section with gusset plate rails braces etc complete drill for fixing of steel sheeting door to prepare for hanging or sliding with and including either hooks and hinges or steel hanging door fitting exclusive or steel sheeting or other covering running rails and guide and fixing complete all as specified and directed.

M&L for preparation of steel and iron new surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of steel and iron Old surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for rendering 15 mm thick plastering 1:4 CM finished even and smooth without using extra cement etc including preparation of new surface of plastered or/un plastered and applying two coats of cement base paint on walls complete all as specified and directed

M&L for rendering 15 mm thick plastering 1:4 CM finished even and smooth without using extra cement etc including preparation of new surface of plastered and applying two coats of cement base paint on walls taking down cement or cement plaster on bricks or stone wall etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed

M&L for preparation of old surface of plastered or/un plastered and applying one coats of cement base paint on walls complete all as specified and directed.

M&L coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor including 75mm thick PCC type C-2 1:3:6,(40mm graded crushed stone aggregate) and 15mm thick cement screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as, copping, Kerb stone, steps and other similar bands plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade including 50 mm thick sand cushioning and 100mm thick cement concrete type C-2, 1:3:6 (40 mm graded crushed stone aggregate) as in base of floor complete all as specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. including Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified complete all as specified and directed.

All as per Item no 25 above but except bricks complete all as specified and directed.

Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains including Demolition of un-reinforced cement concrete in ground floors and paving’s n exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms moulds mitered/stopped ends etc complete all as specified and directed

M&L for Coloured Durastone / Endure heavy duty vitrified tiles of size 300mm x 300mm x 8 to 9mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed

M & L Providing Precast cement concrete type B0 1:2:4 (12.5mm graded aggregate ) set in cement mortar 1:4 louvers and jallies,25 mm thick ( measured solid) including all moulding complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed

Taking down shutters of any description exceeding 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra including taking down cement plaster complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick rendering /screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L Vitrified Coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Aluminum anodized plated, fixed with rawl plugs, complete all as specified and as directed.

M&L "Steel window factory made double shutter and tubular moulded frame of 16gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer, and MS Grill for Guard Bars ." Complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed.

S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, in opening etc complete all as specified and directed

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat mounded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

M&L for factory made, 2nd class Hard wood rail and style 35 mm thick, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 30 mm thick Factory made 2nd class Hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitered beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S & F 3 mm thick sheet glass frosted quality and glazing with oil putty or wooden beads in square not exceeding 0.50 Sqmoin each pane complete all as specified

S&F Aluminum anodized barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed.

S&F Aluminum alloy, anodized, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed .

S&F only mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Extruded aluminum alloy handles fabricated type anodized and fixed, 150 mm size complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern spring including roller and roller plate (mild steel) complete all as specified and directed

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed .

M&L for preparation of New wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed .

Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed .

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth including taking down cement plaster and preparation of New surfaces and applying two coats of cement base paint, complete all as specified and directed .

M&L Applying two coats of oil bound distemper of any colour or tint including preparation of newly plastered surfaces of walls complete all as specified and directed .

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed .

Preparing old white washed surfaces of ceiling (plastered or un-plastered) for white washing and applying one coat of white wash complete all as specified and directed .

M&L 3mm thick wall care putty on wall including l roughening of surfaces complete all as specified and directed .

M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed .

S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan Orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connection to trap, and to flushing pipe, antisyphonag pipe, etc. complete including making good to floor complete all as specified and directed .

S & F in repair wash down water closet (Pedestal pattern) white with P or S trap including flush pipe of polythelyene of low or high density of PVC 32 mm dia for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminized hinging device and connection to low level flushing cistern and flush pipe etc complete all as specified and directed.

S & F in repair Brass CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed ..

S & F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed .

Supply and fix in repair for Vitreous China urinals, Half stall type, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in position suspended false ceiling system using E-grid suspended ceiling grid system of M/S Saint Gobain. The size of grid shall be 600 X 600mm with GI frame work main runner 38 X 24 cross tee 25 X 24 mm and wall angle 24mm X 24mm using 8 mm th ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 part-I 1996 fixed in the grid of E grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butterfly clips including Demolition of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed .

Supply and fix in repair for 15mm dia bore Stop valve/Angle Valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed .

S&F 10 ltr capacity PVC valve less, symphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe fixed in repair complete all as specified and directed ..

Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm. complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm complete all as specified and directed .

S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, complete all as specified and directed ..

S&F Stop valve, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed .

S&F Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm and fixed in repairs, complete all as specified and directed ..

Ditto all as item no 84 above but fancy type complete all as specified and directed .

S&F in repair 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, fixed in repairs, complete all as specified and directed .

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and directed

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 100mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed.

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor, 100mm dia, sand cast pipes complete all as specified and directed.

Ditto all as item no. 93 but 75mm dia complete all as specified and directed.

S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Ditto all as per item no 95 but 75mm dia complete all as specified and directed.

S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 dia complete all as specified and directed

S&F cast iron trap 'P' or 'S' 100 mm complete all as specified and directed

S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

S&F salt glazed stone ware gully traps, square or round mouthed, type 'P' of size 150 x 150 mm complete all as specified and directed

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltr including dismantling of tank complete all as specified and directed

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltr including dismantling water tank complete all as specified and directed

S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed

S&F in repair PVC grating 100mm square/round of PTMT, complete all as specified and as directed .

Taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm complete all as specified and directed.

S&F PVC (SWR) bends any radius of bore 110 mm complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.40 to 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed

M&L foe rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410-W(Gde-E-250) quality complete all as specified and directed

S&F in repair 15/20mm Nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

M & L coloured Chequred cement concrete tiles 30 cm X 30 cm X 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15 mm thick screed bed of 1:4 cement mortar including 75 mm thick cement concrete type D-2 1:4:8(40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement. complete all as specified and directed

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to Nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed

S&F in repair chromium plated PTMT shelves fixed with and including chromium plated brass screws and plastic cleats.

S & F in repair health faucet(ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25meter long flexible tube and ABS wall hook including making connections and fixed in positions complete all as specified and directed

S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed

S & Fin repair Fancy type Brass Chromium plated, soap dish, complete all as specified and directed

Supply and fix for natural colour anodized aluminum window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter of size 50x40x1.30 mm and glass pane not less than 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including suitable aluminum handle, tower bolt hinges and aluminum grill not less than 6 mm dia fixed with frame complete all as specified and as directed.

Supply and fix for natural coloured anodized Aluminum Door shutters side hung type with safe bars locking rails locking arrangements and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodized aluminum snap beading screw suitable handle etc with and including sheet glass fitted type glazing quality of 4mm thick size of lock rails 44.45x81.50mm side rails 85.85x44.45mm top rail 83.5x44.45mm bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete all as specified in MES SSR 2010. Part-I complete all as specified and directed

M&L for water proofing treatment in sunken portion and applying water proofing treatment on horizontal or vertical surfaces by applying bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane over sunken portion after cleaning the surfaces by removing dust, dirt etc., as per manufacturer’s instructions over and including 15mm thick plaster in CM 1:4 complete all as specified and directed

M&L PCC 1:5:10, Type E2 (using 40 mm graded brick bats) in filling of sunken portion complete all as specified and directed

M&L PCC (1:2:4) type B-0, using 12.5mm graded stone aggregates 25mm thick as sub base complete all as specified and directed

M&L cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc, complete all as specified and as directed .

S&F for 50mm dia GI Medium grade Pipe in sunken portion with all fitting and fixed complete as spouts including cutting hole and making good the same complete all as specified and directed.

Om Sai Ram Builders

Substantial Const. Co.