8962/E8

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick JK Wall putty on wall all as specified and directed

M&L three coat of white wash on wall including preparation of new plastered surface complete all as specified and as directed.

M&L three coat of white wash on ceilling including preparation of new plastered surfac complete all as specified and as directed.

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F for 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and as directed.

S&F for 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down wooden/steel windows /ventilators of any size and any description including all fittings complete all as specified and as directed.

S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver, aluminium stopper, hydraulically regulated door closer (Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows,ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel, sheeting or other covering, running rails and guisides ) and hanging also fastening and fixing complete

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass , gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats complete all as specified and as directed.

Dismantling boarding any size and description fixed in any position with nails complete all as specified and as directed.

S&F 20mm thick boarding with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws complete all as specified and as directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long mild steel pressed handles oval type stove enamlled black complete all as specified and as directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded.

S&F steel ventilator with top hang shutter including hinges steel pag stay complete all as specified and as directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes.framedguard bars iron doors, ladders framed balusters, walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe410 complete all as specified and as directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

All as per item No. 43 here in before but 4.8mm thick frosted sheet glass.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness,size,quality or description) from old wooden/steel frame ,or stones, concrete or brick surrounds glazed with putty or fixed with beads

M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for filling in bed block of hold fast etc complete all as specified and direcetd.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and direcetd.

M&L for cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ .30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed.

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 200 mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in dado/skirting etc including 10 mm thick rendering in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for Vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx 440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device

S&F in repair CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified and as directed.

S&F in repair toilet paper holder box type coloured of vitreous china fixed to wall with chromium plated (CP) brass screw complete as specified and directed

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S&F in repair PVC bathroom cabinet standard quality and size 432x311mm complete all as specified and as directed. Make:- commander/sintex/Prayag

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Taking down old 110/75 mm bore PVC (SWR) pipes in any position complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore PVC (SWR) bends complete all as specified and as directed.

S&F 110mm bore PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl.

S&F 110 mm PVC (SWR) bend any radius

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F for GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking up existing GI Tubing15 mm dia & connections complete all as specified and as directed.

All as per item No. 85 here in before but 20 mm dia

Taking up or down existing GI Tubing15 mm dia and refixing with new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall all as specified and dircted

All as per item No. 87 here in before but 20 mm dia

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (minimum wt. 90gms).

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F (in repairs) angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed complete all as specified and as directed. (Minimum wt 40 Gms)

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified

S&F rotational moulded polethylene water tank of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and as directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and as directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed of 15mm dia pipe complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

M&L for Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm complete all as specified and as directed.

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S & F in repairs 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4, type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed.

M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and as directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step,skirting,dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and as directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

S&F 12 mm thick accoustic perforated tiles fixed or laid/inserted to GI frame work of grid size 605x605mm as in false ceiling all as specified, including Hangers 6 mm dia GI (upto 1200 mm in length) adjusting levels fixed to roof slabs by cieling cleats made of GI flat 40 x 3 mm size 60 mm long complete all as specified and as directed.

S&F in repair fancy type curtain rod MS conduit rod PVC coated including fancy nob and ms bracket for hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and as directed.

S&F in repair Aluminium Mortice lock 4 lever, size 75mm complete all as specified and as directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

S&F in repairs partition wall of anodised aluminium hollow section members of size 63.50 mmX38mmX3mm thick with distance of vertical hollow section 1.0 m to 1.2 m and 1.0 mtr height wall having top rails, bottom rails and middle rail of size 63.50mmX38mmX3mm and upto middle rail wall panels shall be covered by 12 mm thick pre laminated particle board, interior grade both side with decorative choice laminations fixed into the wall with aluminium clip and bolt from middle rail to top rail panels shall be covered with 5.5 mm thick tinted glass fixed with aluminium strips/beadings with rubber gasket, sketch plan of wall as per existing or as provided by the Engineer-in-Charge complete all as specified and directed.

Taking down aluminium door/windows of any size and description and repair/replacement of parts such as beading, rubber gasket , floor spring , mortice lock etc and refixing in the same opening all as specified and directed.

Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings with all accessories such as tee, bends, elbow, reducers etc and galvanized iron sheet steel terminal boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly complete all as specified and as directed. (Make : schneider elect/legrand mosaic/anchor ave) Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster

One light / Fan point controlled by one way switch complete all as specified and directed.

One Bell /Buzzer point controlled by one way switch complete all as specified and directed.

One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

one light point controlled by two way switches complete all as specified and directed.

All as per item Ser No.134 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fix bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing socket out let 5 pin 5 Amps flush type all as specified and directed.

Supply and fixing socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

M & L for replacement of Step regulator modular type for ceiling fan of any sweep complete all as specified and directed.

S&F for lamp holder insulated body of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.

S&F Stepped type electronics fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Suppply and fixing submain wiring with using two single core 6.0 Sqmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI Marked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption built in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

All as per item Ser No.148 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

All as per item Ser No.148 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and replace Rigid PVC casing & capping 20/25 mm wide complete all as specified and directed.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'c' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

Supply and replace the Industrial laminated hylam sheet of size 250 mmx 200 mm and 3 mm thick ISI marked complete all as specified and directed.

All as per item No. 155 here in before but 350 mm x 250 mm

All as per item No. 155 here in before but 175 mm x 100 mm

All as per item No. 155 here in before but 100 mmx 100 mm

Supply and replace iron rectangular block of size 100 mm x 100 mm and 50 mm deep for mounting, switches, sockets, fan regulator etc. with 1.6 mm thick complete all as specified and directed.

All as per item No. 159 here in before but 175 mm x 100 mm and 50 mm deep

All as per item No. 159 here in before but 100 mm x 100 mm and 50 mm deep

All as per item No. 159 here in before but 250 mm x 200 mm and 50 mm deep

All as per item No. 159 here in before but 350 mm x 250 mm and 50 mm deep

Taking down ceiling fan cable end, dismantling blades and removing fan for minor repairs complete all as specified and directed.

M&L Painting of ceiling fans complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and fix in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete, all as specified and as directed.

Supply and fixing in repairs new LED bldg security light fitting 35 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 3 of SSR-2009 (Part-I).

M/S CHAUHAN ELECTRIC WORKS

M/S SHAHABUDDIN AND SONS

m/s udit constructions