Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
20 Sept 2023, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mysore Urban Development Authority
MUDA SE OFFICE
ESTIMATION FOR SINKING OF 165 MM DIA BOREWELL FOR PROVIDING WATER SUPPLY FACILITIY, ERECTION OF 5HP SUBMERSIBLE MOTOR WITH PUMPSET, FIXING OF ELECTRICAL EQUIPMENTS, ELECTRIFICATION, PROVIDING AND LAYING PIPE LINE AT MYSORE URBAN DEVELOPMENT AUTHORITY HORTICULTURE NURSERY
MUDA/2023-24/OW/WORK_INDENT6
MUDA/2023-24/OW/WORK_INDENT6
Open
Other Works
Electronic Documents, First(One Cover)
MUDA Commissioner Office Mysuru
3 documents required · 3 mandatory
₹500
₹10,000
12 Sept 2023
12 Sept 2023
16 Sept 2023
ESTIMATION FOR SINKING OF 165 MM DIA BOREWELL FOR PROVIDING WATER SUPPLY FACILITIY, ERECTION OF 5HP SUBMERSIBLE MOTOR WITH PUMPSET, FIXING OF ELECTRICAL EQUIPMENTS, ELECTRIFICATION, PROVIDING AND LAYING PIPE LINE AT MYSORE URBAN DEVELOPMENT AUTHORITY HORTICULTURE NURSERY
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and c...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and c...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and c...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and c...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5...
Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 metres Pipes of dia 32mm to 80mm ---- included cost of hire charge...
Supplying and erecting of 50 mm dia MS clamp with bolts and nuts ---- included cost of hire charges of machineries and equipments with all lead, lift, supply and erection and labour charges, complete ...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm ---- included cost of hire charges of machineries and e...
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union ---- included cost of hire charges of machin...
Supply and delivery at site wrought middle steel (galvanized) GI plugs confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Plugs ---- included cost of hire charges of machin...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.75 x 75...
Fabricating, Supplying and mounting MS Box Made out …. SWG Suitable for Floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equip...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete., 63 Amps ---- included cost of hire charges of machineries ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing aterials and C type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capac...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 A 4 poles ---- included cost of hire charges of machine...
Fixing a shunt capacitor of kVAR capacity with necessary clA bolts and nuts on existing wooden or metal board including banking of more than one capacitor 5kVAR ---- included cost of hire charges of m...
Supplying fully automatic star-delta starter unit push button type with suitable wires 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/...
Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. ---- included cost of hire charges of machineries and equipment...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc., using 40mm dia 2.9mm thick 2.5 mtr. Long GI Pipe with GI funnel with mesh and suitable size reducer fixe...
Digging of trench of 0.6 M.deep x 0.5 meter wide refilling the trench to the required ground level and consolidating etc., complete. In soil. ---- included cost of hire charges of machineries and equi...
Providing and laying in position 100 mm dia stoneware pipe in existing trench ---- included cost of hire charges of machineries and equipments with all lead, lift, supply and erection and labour charg...
Supplying of 1.1 KV LT UG Cable XLPE or heat resistant PVC Insulated, PVC extruded, inner sheath armoured, UG LT cable as per IS - 1554 (part-1) or IS - 7098 part-1, Armouring strip thickness in avera...
Labour charges for Laying of 1.1 KV class UG cable in existing trench GI pipe/ store ware pipe, on wall/ on pole as required.6 sqmm to 16 sqmm. ---- included cost of hire charges of machineries and eq...
Providing and filling sand in excavated trench to cover already laid UG to a depth of 150 mm all-round the cable. ---- included cost of hire charges of machineries and equipments with all lead, lift, ...
Supplying and fixing of class A (medium duty) GI Pipe of wall thickness not less than 3.25 mm on pole/wall/drain crossing with necessary clamping arrangements for U cable of 1.1 KV class. 40mm. ---- i...
Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with terminals, clamps, bolts,nuts and washers etc., 16 sqmm ...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- included cost of hire charges of machineries and equi...
Arranging the power supply from CESCOM and payment of 2 MMD charges towards CESCOM for power sanction. ---- included cost of hire charges of machineries and equipments with all lead, lift, supply and ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Manufacturing, providing, transporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-73...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 KPPP GENERAL NEW.doc
Tender Document • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .