COMPREHENSIVE CERTAIN B/R AND E/M WORKS IN RESIDENTIAL ACCN OF PAO, LAO SAUGOR UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq m each complete all as specified and directed.

Taking down chowkhats or frame (with out taking off shutters from the frames) exc 1.50 Sqm but n exc 4 Sqm each with shutters complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.

S&F 35mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20 (a), with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, with and including preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, with and including preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

S&F sheet glass, 3.0 mm thick ordinary quality fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as specified and directed

S & F 3 mm thick sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane, including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with SS staples complete all as specied and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back including 3 Nos 100 mm stainless steel butt hinges complete all as specified and directed.

S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed (Aluminium section thickness 1.50 mm )

S&F powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as specified and directed (Note:-Aluminium section weighing not less than 0.55kg/m }

M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM (1:4), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 450x300x7mm thick, over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer, including demolition of old cement concrete in any description and any position complete all as specified and directed.

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete, including demolition of old cement concrete in any description and any position, thickness n exc 15cm complete all as specified and directed.

M&L for 18 mm to 20 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:3) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete and including dismantling of old Stone slabs /Kota stone/Tile of any description or thickness etc complete all as specified and directed.

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed.

S&F 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified and directed.

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed.

S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6, including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished the surface fair and even complete all as specified & directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and smooth without using extra cement, including taking down of existing cement or cement lime plaster complete all as specified and as directed.

M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces even and smooth without using extra cement, including taking down of existing cement or cement lime plaster complete all as specified and as directed.

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of enterior Acrylic emulsion over a coat of alkali resistant primer (internal wall) complete all as specified and directed.

M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying 2mm thick Birla/J K wall care white putty on walls and applying two coat of enterior Acrylic emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for prepration of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6, C1 (20mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar, including demolition of old cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with and including 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms), including dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with and including 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms), including dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.

S&F for in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 15 mm dia GI tubing and connections complete all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 20mm dia GI tubing and connections complete all as specified and directed

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.

S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.

S&F in repais vitreous China wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) incl White Seat cover complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Coupling and down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Coupling and down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S& F in repair Stainless steel Plate Rack of Size 900mmx600mmx250mm Make Prayag (Cat No. P-336) or equivalent as given in appendix 'C' complete all as specified and directed.

S&F in repair tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

S&F in repair 25 mm bore stainless steel conduit curtain rods, suitable for door/widows curtain with fancy type powder coated SS dooms with brackets fitted to each end and fixed to wall and making good etc complete all as specified and directed

S&F in repair bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repair angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore complete all as specified & directed.

S&F in repair Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed.

S&F as in repair Multi bib tap 2 in 1 , cast copper alloy chromium plated fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F PVC connections 15mm bore size450 in length with both end brass high quality nuts complete all as specified & directed.

S&F in repairs brass chromium plated shower rose fancy type , as approved , with or without swivel joints, including fixing to steel pipe fixed complete all as specified and directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified & directed.

S&F in repairs PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified & directed..

S&F in repairPVC (SWR) bends 110 mm dia complete all as specified & directed.

S&F in repair PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed. .

S&F in repair PVC (SWR) bends 75 mm dia complete all as specified and directed

S&F in repair 75 mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified ans directed.

S&F in repair concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed by Engineer-in-charge.

M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed by Engineer-in-charge. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

For one light point or fan point controlled by one switch.

For one Call Bell point controlled by one push button switch.

For 5Amp independent socket point controlled by one switch.

For one 3 pin ,5 Amp socket point with other switch on the same board.

M&L for power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed by Engineer-in-charge. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

For one light point or fan point controlled by one switch.

For one Call Bell point controlled by one push button switch.

For 5Amp independent socket point controlled by one switch.

For one 3 pin ,5 Amp socket point with other switch on the same board.

M&L for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

S&F of Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed by Engineer-in-charge.

S&F of modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed by Engineer-in-charge.

S&F of Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed by Engineer-in-charge.

S&F of modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed by Engineer-in-charge.

S&F of Modular fan step regulator 120 Watt -2 module complete all as specified and directed by Engineer-in-charge.

S&F of Modular bell push 6A one module complete all as specified and directed by Engineer-in-charge.

S&F of switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed by Engineer-in-charge.

S&F of socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed by Engineer-in-charge.

S&F of switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed by Engineer-in-charge.

S&F of socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed by Engineer-in-charge.

S&F of ceiling rose, surface bakelite,three terminal complete all as specified and directed by Engineer-in-charge.

S&F of lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed by Engineer-in-charge.

S&F of bell ding dong 230 V, single phase complete all as specified and directed by Engineer-in-charge.

S&F of electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed by Engineer-in-charge.

S&F of bell push flush type one way 5Amp 240 Volt complete all as specified and directed by Engineer-in-charge.

M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green, incl. taking down old unserviceable sub main wiring complete all as directed by Engineer-in-Charge. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC Casing-n-caping shall be measured as one unit length.

S&F of testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete all as specified and directed by Engineer-in-charge.

S&F of testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete all as specified and directed by Engineer-in-charge.

S&F of sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar etc, including taking down existing DB complete all as specified and directed by Engineer-in-charge. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

S&F of double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar etc, including taking down existing DB complete all as specified and directed by Engineer-in-charge. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

S&F of LED Bulk head 13/10 watt designed for modern homes available in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed by Engineer-in-charge.

S&F of TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed by Engineer-in-charge.

S&F of box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed by Engineer-in-charge.

S&F of Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure etc, including taking down existing AC box complete all as specified and directed by Engineer-in-charge. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

ARAZAENTERPRISES (BID ID -3117574)

maharaja construction and suppliers (BID ID -3117960)

d k suppliar (BID ID -3128622)

dipangashu barick and associates (BID ID -3112003)