WBPWD/SSE/SWEC/NIQ19/2026-27

Supply and decivery of 9 mtr. Galvanized Solar Mini High Mast, Top A/F 100, bottom A/F 310, 3 Shaft Thickness mm, Base Plate -490(O/Dx16 Wind speed shall be considered 50m/s as per IS:875, Lantern Carriage made of 40NB GI Pipe suitable for 4 Nos. 80W Smart Integrated Solar LED Street Light & Monkey Ladder for maintenance purpose A) Material Grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR)as per IS:2062 C) Galvanization as per BSEN ISO:1461 D) Supply of 6 nos. M24 x 750 "I" type foundation bolts as per EN-8 grade (TS-600) manufactured from special steel alongwith nuts,washers,Anchor plate and templates. [Make :-Transrail/Bajaj/Surya] Note: The following documents/certificates from the Original Equipment Manufacturer (OEM) shall be submitted to the Engineer-in-Charge (EIC) for verification and approval before processing of bills, in order to ensure the authenticity of the Installation and avoid duplication of manufacturers. 1) Factory License of OEM (manufacture of Pole) with validity 2) NABL Accredited Certificate of OEM (manufacture of Pole) with validity 3) Raw Material Test Certificate of Pole Shaft (IS:2062 grade E-350 BR) Make of HR Coil- TATA/SAIL/JSW/JSPL/RINL 4) Raw Material Test Certificate of Base Plate (IS:2062 grade E-250 BR) Make of Plate TATA/SAIL/JSW/JSPL/RINL 5) Raw Material Test Certificate of bracket Pipe (IS:1161 grade) from any reputed BIS Make. 6) Raw Material Test Certificate of Zinc (Zn) Make- Hindustan Zinc(Vedanta) 7) Raw Material Test Certificate of Foundation bolts (EN Grade EN-8 and UTS.>600) any reputed BIS Make

Foundation:- Construction of RCC shallow foundation with Base footing fr erection of highmast Tower by earthwork in excavation of foundation trench approx 1.2m X 1.2m X 1.5m reinforced steel used in foundation 10 mm tor both ways as per direction of E.I.C inluding removing spoils and necessary trimming the site of trench levelling dressing and bottom after that placed jhama bricks solling and dressing bed levelling and filling joints after that distribution rods proper size strips,binder etc. and vertically MS rods 12mm dia foundation of 8 nos. and with two ways stirups 8 mm dia tor @ 150 mm c/c spacing including binding with 16 SWG black anneals wire steel shutterings and placement of not less than 5 nos. (53 mm dia X 1200 mm long) foundation bolt with ancher plate of strength and ready mix concrete of M20 grade with graded stone chips 20 mm as per IS 10262 and IS 456 (proportion 1:1:2) complete and water rigidly next 7 days considering the safe soil bearing capacity of 10T/ sqm and erection of solar mast by using of lifting equipment like hydra etc and fixing foundation bolt, anchor plate etc with necessary arrangement

Supply , Installation, Testing and Commissioning of 4 nos. 80W Smart Integrated Solar LED Street Light All in One , LED ratting 50000 Hrs. L70, Lumen Efficacy >150, CRI >70 CCT-5700 , LED Driver Housing – Aluminum Dia Cast Lithium Battery 4 nos– LiFePO4, Operating Voltage 12.8 V, 54 ah (BIS Certified) , 2days Autonomy with Dimming , 4 nos Solar Pannel – Monocrystalline – 120-150 Wp. IP-66 5 Years Warranty. [Make- Transrail/Bajaj/Surya] Note: The following documents/certificates from the Original Equipment Manufacturer (OEM) shall be submitted to the Engineer-in-Charge (EIC) for verification and approval before processing of bills, in order to ensure the authenticity of the Installation and avoid duplication of manufacturers. 1) LED Performance Test Report – L70 ≥ 50,000 hrs, efficacy >150 lm/W, CRI >70 and CCT 5700 K. 2) PV Module Certificate – IS/IEC 61215 & IS/IEC 61730 for the monocrystalline solar panel. 3) System Test Report – confirming 2 days autonomy with dimming. 4) 5-Year Warranty Certificate – covering the complete solar street-light system.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed.(Make: ISI- medium)

Cleaning of panels and associated accessories maintenance for 5 years ( with minimum 1 visit quarterly)