Karnataka

AOC

Works

Other Works

Providing office space for chairman in mescom office and providing and fixing storage mobiliser in attavara devision office

Mangalore Electricity Supply Company Limited

MESCOM Chief Engineer Zone Office Managaluru | Karnataka

Amount: ₹39.7 LCloses: 10 Jan 2026Closed

Timeline

Published2 Jan 2026
Closed10 Jan 2026
Awarded12 Mar 2026

Bids

1 Bid12 Mar 2026

#	Company	Amount	Status
1	THENKILA RAMAPPAYYA RAJESH ₹40.1 Laccepted-finance	₹40.1 L	accepted-finance

Tender Value

₹39.7 L

EMD Value

₹93,650

Closing Date

10 Jan 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Mangalore Electricity Supply Company Limited

Contact Person

Yashavantha n p

Mobile Number

Work Description

Providing office space for chairman in mescom office and providing and fixing storage mobiliser in attavara division office

Tender Information

Tender ID

MESCOM/2025-26/OW/WORK_INDENT387

Reference Number

MESCOM/2025-26/OW/WORK_INDENT387

Tender Type

Open

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

MESCOM Chief Engineer Zone Office Managaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredValid ESI EPF Registration Certificate

RequiredGST Registration document

RequiredValid Labor License certificate

RequiredValid PWD Class license

RequiredSimilar Workdone certificate of amount Lakhs23 Lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Fee & Financial Details

Tender Fee Amount

₹1,000

EMD Fee Amount

₹93,650

Important Dates

Last Activity

2 Jan 2026

Published

2 Jan 2026

Download Ends

7 Jan 2026

BOQ Preview

•

Providing office space for chairman in mescom office and providing and fixing storage mobiliser in attavara devision office

•

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing, fabricating and fixing partition frame work consiting of 50mmx50mm salwood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling , the partion shall be skinned on bo...

•

Providing, fabricating and fixing Wall pannel to the Exsitingwall shall be skinned on both sides using 12mm thick commercial plywood of approved brand termite and water resistance, and top covered wit...

•

Providing and fixing plywood storage unit of Size 4250mmx380mmx820mm made with 20mm BWP grade ply and inner surfaces shall be finished with 0.8mm thick laminate of choice and veneer with melamine poli...

•

Providing and fixing Wall panel with 8mm thick CPC wallpanelling material with combination of wall panel and fluted panel fixed using nail free silicon and alluminium iodized profile including all ac...

•

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bot...

•

Providing & fixing Vertical Blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per dir...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 m...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Point wiring using copper wire without switch : Supplying and wiring adopting loop system in existing PVC Conduit / casing caping using copper PVC insulated multi strand 2*1.5Sqmm copper wire with ...

•

Medium point above 3Mtr upto 6mtr from tapping point to outlet via switch

•

Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, requir...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose, necessary...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...

•

Design,manufacturing ,Supply &Installation of Mechanical type Mobile Storage system (Optimizers)as per approved drawings. Base frame of 3.15 mm thick C channel HR sheet (30x100x30mm) cabinet of 22swg(...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-2 - corporate office.docx

Tender Document • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

THENKILA RAMAPPAYYA RAJESH

₹40.1 Laccepted-finance