Loading…
Loading…
Tender Value
Refer Docs
Closing Date
12 May 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
51
3 conditions · 3 needing a document upload
The supply shall only be either from original manufacturer of cut resistant gloves or its authorized dealer (certified by OEM).
For Authorised Dealer: : OEMs can authorize and give Tender Specific Authorization to its Agent / Dealers to quote on their behalf provided the vendor takes full responsibility for the quality of the material including warranty obligation and the inspection of product against Railways order is carried out at the manufacturers premises.Please refer para 3.4 of Part-B of Southern Railway Tender Conditions attached with this tender.
Necessary Test certificates for the offered gloves for all the protection performance parameters in clause no 3 of attached specification, conforming to EN 388:2016 from NABL accredited lab with detailed test report must be submitted along with the tender, or the offer will be summarily rejected.
28 conditions
The Guarantee/Warranty of the item mentioned in the tender is only indicative, the actual Guarantee/Warranty is applicable as per the product specification.
[a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Please refer para 15.0 of part - B of "SR TENDER CONDITIONS" for details regarding "BENEFITS OF MSE AS PER PUBLIC PROCUREMENT POLICY"
PUBLIC PROCUREMENT POLICY (Preference to Make in India), please refer Para 16.0 Part B of Southern Railway Stores Tender Conditions for Electronic Tenders available under the mentioned link. Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020 & 2020/RS(G)/779/2/Pt.1 (E3322671) dt.20.08.2024) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable, evidence of valid registration by the Competent Authority shall be attached."
MSE firms should submit a copy of valid MSE Certificate at the time of submission of their bid. (As the validity of Udyog Aadhar Memorandum was up to 30.06.2022 it is not considered as a valid document for availing MSE preference).
Deviations: Technical/Commercial deviations if any should be recorded in the Techno - Commercial Tabulation field itself. If it is attached in the Annexure or as attachments the same are liable to be ignored.
HSN CODE 8607 and SOUTHERN RAILWAY / TAMILNADU GST NO. 33AAAGM0289C1ZQ - (i) Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. ii) a) The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. b) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder. c) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. d) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order. e) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
I/We agree to supply the tendered stores at the rates quoted by me / us in accordance with the IRS conditions of contract, Special and other conditions specified / attached with the tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common Partner/director/promoter/owner/ holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
1 location across Tamil Nadu · 5,000 Pair total
HAND GLOVES- CUT RESISTANT GENERAL PURPOSE
51265059A
51265059A
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
12 May 2026
27 Apr 2026
1 item · 5,000 Pair total
HAND GLOVES- CUT RESISTANT GENERAL PURPOSE CONFIRMING TO SPECS: EN 388:2016 [ Warranty Period: 12 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MACHINE/SHP/PWP, SR | Tamil Nadu | 5000.00 Pair |
| Total | 5,000 Pair | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5756484.pdf
ATTACHMENT
5680142.pdf
ATTACHMENT
5680138.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .