PROVN OF CHAINLINK FENCING BEHIND BLDG NO P-251, PROVN OF FLOOR AND WALL TILING IN BLDG NO 64 AND CERTAIN REVENUE AND MINOR WORK AT KALIMPONG MIL STN UNDER GE 867 EWS

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed.

Excavation in post holes each n.exc 0.5Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to ad distance n.exc 50m and making good surface all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundations, filling and mass concreteing all as specified and as directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for Cement concrete (1:4:8) type D-2 (Using 40 mm graded stone aggregate) as in sub base of floor 100 mm thick all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded aggregate) as in flooring and finishing cement concrete surfaces even and smooth with using extra cement slurry and making impression of expanded metal,whilst the concrete is green all as specified and as directed.

M&L for Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base all as specified and as directed.

M&L for 40 mm thick Plain Cement Concrete type B1 (1:2:4) using 20mm stone aggregate as in flooring finishing even and smooth without using extra cement all as specified and as directed.

M&L Reinforced Cement Concrete M-25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and as directed.

M&L Reinforced Cement Concrete M-25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L Reinforced Cement Concrete M-25 (Design Mix) as in roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and as directed.

S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregates as in coping complete all as specified and directed.

M & L Providing precast cement concrete Type B1 (1:2:4) (using 20 mm graded crushed stone agggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and as directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Eng-in -Charge.

Supply only Chain link MS galvanised fencing of size or type made cut from GI wire 4mm dia and 50mm aperature weight not less than 4 kg/Sqm all as specified and directed by Engineer-in-charge

Fixing only MS chain link fencing including line wires, any mesh size and type of standars, rails, straining bolts etc. incl provn of binding wires all as specified and as directed. Note:- Chainlink fencing shall be measured and paid as separately as supply only.

S&F mild screw bolts(machine made) dia of neck in 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end ti be fitted with washers and one hexagonal or square nut,but length of bolt exc 5cm but n.exc. 10 cm long all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F of TMT bars 5 mm dia and over upto and including 10mm dia in stirrup, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and as directed.

S & F galavanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spaceing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel pins etc all as specified and as directed.

M & L for Excavation in trenches, n . exc. 1.5 m wide and n . Exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.

M&L for PCC (1:4:8) type D2 (40mm graded aggregate) as in foundations, filling and mass concreteing all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 5 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brickwork or concrete surfaces, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.

M&L for three coat of white wash on newly plastered surfaces on wall all as specified and directed including preparation of surfaces.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Returing filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soils all as specified and as directed.

Removing of excavated materials n.exc 50mtr and depositing where directed at a level n.exc 50 mtr above the starting point in soils all as specified and as directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L for roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including for brushing neat cement slurry @ 3 Kg per square meter complete all as specified and directed.

Taking down cement plaster of brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a)(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dardo/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaces of tile over and including 15 mm thick backing plaster/rendering in cement mortar (1:4) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&FStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F for 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in clause 8.B.2 of SSR -2010 (Part-II Rates) complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed.

S&F 150 mm size Aluminium handles, cast type, anodised and all as specified and directed.

S&F of 200 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S&F in repairs water closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonic pipe etc complete including P or S trap set in and including necessary lean cement concrete complete all as specified and directed.

S&F in repairs vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed

S&F in repairs angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repair Brass chromium plated shower rose with or without swivel joints 125 mm size , including fixing to steel pipe or unioncomplete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and as directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F of 110mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces as on ceiling and finished fair and even without using extra cement complete all as specified and directed.

M&L for two coats of old bound distemper over a coat of priming coat on newly prepared wall surfaces, including one coat of thick layer of wall care putty (Birla white or equivalent) all as specified and directed.

M&L scrapping of existing treatment and applying one coat of thin layer of wall care putty (Birla white or equivalent) and then applying one coat of oil bound distemper over a coat of priming coat after preparation of wall surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed.

Taking down , chipping and removing the loose spailt , damaged cement concrete , cement mortar surfaces of RCC columns , beams , walls , chajjas etc and exposing the reinforced cement concrete , wire brushing and cleaning the exposed steel reinforced bar , applying rust remover over the cleaned re - bar surface , wash with clean water for removing all rusts from the old reinforcement bar surfaces , fixing new reinforcement , cut to lenghts , bend to shape required and tying with and including mild steel wire ( annealed ) not less than 0.9mm in dia for stregthen the members as required , applying two coats of epoxy zinc primer on new and old steel surfaces , saturate the substrate with water applying one coat of water , Nitbond SBR ( Latex ) and cement in ratio ( 1 : 1 : 3 ) slurry as bond coat after that applying ready mix epoxy repair mortar , 40 mm average thick in any number of coats , to provide at least 30mm thick cover to reinforcement , finished the surfaces even and fair includ ing erecting and dismantling scafolding for carrying out the work complete all as specified and as directed . Make of Epoxy Ready made Mortar and Epoxy chemicals -Fosrock / Dr Fixit / Sunanda . Note:- (i) New reinforcement will be measured and paid seperately (ii) Cost of fixing of new reinforcement by welding / binding with old reinforcement and providing , errecting and dismantling scaffolding shall deemed to be included in quoted rates.

M&L Chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floors including 20 mm thick screed bed in CM(1:6) as bedding layer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where all as specified and as directed.

M&L for point wiring with stranded copper conductor PVC insulated unsheathed 1.50 sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of apppropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend,PVC conduit for crossing etc. complete with PVC terminals box for mounting switches,sockets,fan regulators etc with one single core continuous 1.5 sqmm,FRL copper cable for earth wire complete all as specified and as directed. for One fan/Exhaust fan point controlled by one switch.

S&F switch piano flush type single pole one way 5 Amps complete all as specified and as directed.

S&F Ceiling rose ,3 terminal,PVC/Polycarbonate insulated body all as specified and as directed.

S&F Exhaust fan,Plastic body 200mm sweep,complete with louvers with all accessories including electric connecction all as specified and as directed . Havells Celso/Eqvt from CG/Bajaj.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and as directed.

Didmantling and taking down unserviceable main switch,DB etc any type/size and making good disturbed surface to match with the existing finished complete all as specified and as directed.

M&L for point wireing with two runs of strand copper conductor PVC insulated unsheated 1.50 sqmm FRLS cable in and including PVC casing caping of suitable size with pvc terminal box for mounting switches sockets,fan regulators etc with one single core continous 1.50 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch.

All as per item no -101 but One fan point controlled by one switch all as specified and as directed.

All as per item no -101 but One 3 pin socket outlet 5 Amps on the same board all as specified and as directed.

All as per item no -101 but One 3 pin socket outlet 5 Amps on the indepent board all as specified and as directed.

M & L One 15 A Socket outlet indepentdent with 2.5 sqmm PVC cable and 1.50 sqmm cable as earth continuity wire.pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size all as specified and as directed.

M & L Point wiring with 2.5 sqmm pvc cable and 1.5 sqmm cable as earth continuity wire in and including One single pole and neutral encloser with two pin and earth plug and socket with one MCB SP 20 Amps for Gyser all as specified and as directed.

M&L for Switch socket combination 3 pin, 5 Amps flush type (multi purpose) complete all as specified and directed.

M&L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.

S&F Bell push, flush type, 5 amp flush type complete all as specified and as directed.

S&F Bell Ding Dong electric AC. 230 volts, single pole complete all as specified and as directed.

S&F in replacement of lamp angle/batten holder Bakelite Pin/Retrofit type with 10 watt LED Lamp (B22) all as specified and as directed.

S&F LED Light fitting 1x9W bulkhead luminaries including LED light driver connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed.

S&F LED Light tube lights fitting 4 feet long 1x18 w,220V,AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F wall mounted lED luminare,1x10 watts with glass shed,prewired with holder ,including one 10 watts LED lamp,Model Endura Rugby New 10W Cat No- LHEOAOP7PZ6W010 all as specified and as directed. Make - Havells or equivalent model of Philips/Bajaj/Crompton.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F MCBs,SPN,240 volts,braking capacity 10 KA,rating 40-63 amps,complete all as specified and as directed.

S&F MCBs,SP,240 volts,braking capacity 10 KA,rating 6 to 32 amps,complete all as specified and as directed.

M&L submain Wiring with two single core PVC insulated,unsheated,stranded copper conductor cable (FRLS),1100 volts grade of size 6 sqmm (nominal area) each and one single core 6.0sqmm (nominal area )as earth continuity conductor drawn intoPVC casing capping complete all as specified and directed. Note :- Ratefor PVC casing capping with accessories are deemed to be included in the unit rate.

S&F Mild Steel round bars 6 to 8 mm dia in fencing, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. confirming to grade I, IS-432(Part-I) all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality confirming to IS-13712, grade B-II(a) (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

SCHEDULE OF CREDIT

SANJAY SAW MILL

G K SUTHAR

PRASAD PRADHAN AND SON

DEEP CHANDRA JOSHI

MANOJ JINDAL

MS BRAHMA CONSTRUCTION

HEM RAJ GURUNG