8788/2021-22/E8

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including naintal or similar pattern roof coverings.

Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 all complete as specified and directed.

S&F 0.80mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip & straight flashins (length and girth as fixed) having zinc coating @ 120 gm/sqm fixed with 'L' type or 'J' type or cranked hook bolt complete as directed.

Ditto as per srl item 2 and 3 but Except sheeting (any Thickness) and all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.

Preparation of old painted steel surfaces (such as CGI sheet, Window grill ,GI water tube, fencing post etc.) and applying two coat of synthetic enamel paint complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets as directed.

M&L cover fillets of hard board,40mm wide and fixing with screw 6mm thick etc

M&L preparation of new wood and wood based surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old wood and wood based painted surface of any description, over 10 cm width or girth and applying one coat of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Providing and fixing tiled false ceiling of of size 595x595 mm in true horizontal level suspended on inter locking Gyproc metal grid of hot dipped galvanized steel sections(galvanized @ 120 gms /sqm, both side inclusive) consisting of 3600mm long main & quot, T&quot, runner size 24x32mm and0.30mm thick, 1200mm long cross & quot;T" of size 24x25mm and 0.30mm thick,600mmsecondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI .Wall angle is fixed along the perimeters of the ceiling to Walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers. Main"T" runners are then suspended from ceiling using GI slotted cleats of size27 x 37 x 25 x1.6 mm fixed to ceiling with 8 mm dia and 45mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at max1200mm center to center along main T, and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent =wall. Then 1200mm long cross & quot;T & quot; is interlocked between the main "T & quot; at600mm center to center to form a grid of 1200x600 mm and then secondary cross “T & quot; of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally Gyproc 8mm thick tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid. Make :-Lafarge, Boral Gypsum Board Pvt Ltd, Shri Nepal Board Ltd, Aerolite Ceiling System Pvt, Hilux, Armstrong, Dexune or equivalent.

Dismantling timber scantling 40sqcm and over in section in any position in framed work complete all as specified and directed.

Second class softwood (Kail) as in scantling, clean sawn fixed in any position with nails, framed work, complete all as specified and directed.

Boarding 20mm thick of 2nd class hard wood (Kail) with nails in any situation (except flooring and skirting) planed on one side with but joints, complete all as specified and directed.

M/s. Rishav Sood

M/s Joginder Paul Bhatia

M/s Shakti Electric Works

m/S Varun Gupta

Roshan Lal Thakur

Pathania Builders

M/S Ajay Kumar Mahajan