EBID for Drip automation and Sprinkler-related items, Plastic water tanks etc.

Amount

Particulars

Complete Set of Automation irrigation unit:-Specification of the machine with following facility:-Time based and Volume irrigation facility with loaded software programmable as per crop need. Facility for monitoring, record keeping and data analysis for water budgeting.Monitoring of pH and EC of irrigation water and pH correction facility.One dosing channel with rotameter having 1cum flow per hr.Controller having 16 outputs and Expendable up to 80 output. Should Support Multi-Main line with No limit for irrigation and Fertigation program.Filter Flushing (Manual and Auto). Automatic Pump ON and OFF.Emergency alarm for low or high pressure, EC, pH, flow, etc.Fertigation system and PC Communicating unit (controller can be connect with PC).Relay for connection fertigation machine and pump, Power line protector 230v,Water meter electronic, With all Accessories of Automation unit like PVC, UPVC, Electric Cable etc.Body of the machine should be SS

Gravel Filter Back flushing Valve 2” size poly propelene made

Pressure Sustain Valve 2” size MS

Stabilizer 1KVA-1 phase(input 150 to 300V & output of 230 volt)

Single Phase preventer (Havels)

1”Disc Filter 130 Micron for (fertilizer Tank)

Pump Starter with auto star delta ICHP

Plastic fertilizer tank of 500 Ltr capacity

Filter flushing unit Manual and Auto (25cum)

PVC pipe-32mm (6 mtr) and pvc ball valve- (pvc fittings for fertilizer tanks)

2” Solenoid valves with ON/OFF Manual Bleed (with 24VAC input)

Conduite pipe 32 to 50 mm as per requirement

Electrical cables 2.5 to 3 core cable for field controllers as per requirement

Electrical cables 1 & 1.5 core cable for field valve

Board for Panel and Equipment

Head unit

2"Disc Filter (IS 12785 :1994)

Gravel Filter GI/PP2" (IS 14606 : 1998)

Air release valve 1"

Pressure Gauge SS body 2” Dia

Fertiliser Injector 2" (IS 14483 : 1997)

Butter Fly Valve 2" MS

Non return Valve 2'' (Polypropelene)

PP Ball Valve 2" (By pass) (Polypropelene)

Pressure Relief Valve 2" MS Hydoulic

Header assembly GI/PP 2"

Field Drip irrigation components

Main line- PVC 75 /4kg/cm2 (IS 4985:2000)

Sub Main line- PVC 63 /4kg/cm2 (IS 4985:2000)

Flow control Valve 2'' (Polypropelene)

Sub main Flush Valve 50 mm PVC

Pressure Compensated (PC) Drip line 16mm, 2LPH, 0.30 M dripper distance having Anti-Siphon Mechanism (IS 13488: 1992/2008) of white colour

Pressure Compensated (PC) Drip line 16mm, 2LPH, 0.30 M dripper distance having Anti-Siphon Mechanism (IS 13488: 1992/2008) of Black colour

Pressure Compensated (PC) Drip line 16mm, 1LPH, 0.20 M dripper distance having Anti-Siphon Mechanism (IS 13488: 1992/2008) of Black colour

Start Connector16 mm

Rubber grommet 16 mm

End Plug 16mm

Lateral coke 16 mm

Nipple 16 mm

Irrigation Pump and fitting

Electric Pump 5 HP Mono block with control Panel

Accessories for fitting of irrigation pump

Installation

Fittings of automation unit at site

Fitting of irrigation pump

Trench digging and back filling(.50 hectare )

Installation charge for drip irrigation system (With manual valve) (0.50 hectare)

Installation charge of connecting automation unit in field (0.50 hectare)

Fixation of Filter unit

Plastic Water Tank

Plastic water tank of 5000 litres capacity, ISI mark, Black/white in colour

Plastic water tank 1000 litre, ISI mark, white/black in colour

Plastic water tank 500 litre, ISI mark, white/black in colour

Sprinkler Set as mentioned below

HDPE Sprinkler pipe 63 mm x 3.2 kg/cm2, 6 m length, ISI Mark

HDPE Sprinkler pipe 63 mm x 3.2 kg/cm2, 3 m length, ISI Mark

HDPE Sprinkler pipe connecting nipple, 63 mm

HDPE Sprinkler pipe 63 mm sprinkler band

HDPE Sprinkler pipe 63 mm sprinkler Tee

HDPE Sprinkler pipe 63 mm sprinkler end cap

Sprinkler nozzle gun metal,

HDPE Sprinkler pipe 63 mm foot button complete, ISI Mark

GI riser pipe, ISI, ¾ inch

HDPE delivery pipe 63 mm x PN-6, 200 m length x 2 pieces, both end fitted with connecting system, ISI Mark

TRIVENI AGENCY (BID ID -3020690)