ADDITION/ALTERATION OF BUILDING NO P-27 TYPE-V QTR AT NMRL AMBERNATH

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm complete all as specified and dircted by Engr-in-Charge.

Dismantling Dado/skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed by Engr-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and dircted by Engr-in-Charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)

Cement concrete flooring 1:2:4 Type B1 (Using 20mm graded crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc 40 mm thick complete all as specified and dircted by Engr-in-Charge.

Providing and laying double charged Vitrified tiles of size 600mm x 600mm in floor thickness 9 to 10mm conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.complete all as specified and directed.

Providing and laying Vitrified tiles in different sizes (thickness 9-10 mmm), conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 ), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.

Providing and laying non skid ceramic tiles of thick not less than 7mm of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigmentsetc complete all as specified and dircted by Engr-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and dircted by Engr-in-Charge. Note: Size of tiles as directed by Engr-in-Charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Providing and laying Polished Granite stone slab of black colour 18mm thick in required design and patterns, in linear as well as curvilinear portions of the building all complete over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below complete all as specified and dircted by Engr-in-Charge.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Non decorative finish (matt finish) 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineerin-charge.

Providing Second class hard wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete all as specified and directed by Engr-in-Charge (hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing flush shutters 30 mm thick conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed.

Providing and fixing Second class hard wood 30 mm thick wire gauge shutters with ISI marked M.S. pressed butt hinges bright finished of required size using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws complete all as specified and directed by Engr-in-Charge.

Providing and laying in position cement concrete for hold fast of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 type B1 (using 20mm graded crushed stone aggregate) complete all as specified and dircted by Engr-in-Charge.

Supply and Fix 100x75x3.50mm ISI marked MS butt hings with necessary screws complete all as specified and directed.

Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.

Supply and Fix 125 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

Providing and fixing 200x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete all as specified and directed.

Providing and fixing 150 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete all as specified and directed.

Providing and fixing Powder coated aluminium Frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Note : Glazing, paneling and dash fasteners to be paid for separately.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding shutters for doors, windows & ventilators etc including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete and dircted by Engr-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) with EPDM rubber / neoprene gasket etc complete all as directed by Engr-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing fly proof stainless steel With aluminium beading grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm complete all as specified and directed by Engr-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

Material and Labour for 15mm thick External wall plaster on brick or concrete surfaces in CM 1:4 shall be provided in two coats viz 10 mm first coat and 5 mm second coat using W.P.C.and finished fair and even complete all as specified and directed. Note:- WPC will be measurement separately.

Material and Labour for 12 mm thick internal plaster on brick or concrete surfaces in CM 1:6 and finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for 6 mm cement plaster in 1:3as in ceiling as finished even and smooth complete all as specified and directed.

Supply only liquid water proofing compound all as directed

Preparation of Newly Plastered surfaces of Wall and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of primer complete all as specified and dircted by Engr-in-Charge.

Preparing surfaces of new plastered wall surfaces and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and dircted by Engr-in-Charge.

Material and Labour for preparation of newly plastered ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resitance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm over old surfaces as per manufacturer instruction complete all as specified and directed by Engr-in-Charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs and Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and apply two coat of Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade complete all as specified and directed.

Material and Labour for two coat of white wash on ceiling including preparation of old surfaces complete all as specified and directed.

Painting with synthetic enamel paint on steel surface of approved brand and manufacture of required colour to give an even shade two coats on new work complete all as specified and directed.

Applying priming coat for new wood work With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer including Painting wood work with Deluxe Multi Surface Paint of required shade. Two coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10sqm of approved brand and manufacture as per manufacturers specifications complete all as specified and directed.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed..

Supply and Fix in repairs 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and Fix in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Providing and fixing in repair white vitreous china pedestal type water closet ISI marked (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

Providing and fixing in repair wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with 15 mm C.P. brass pillar tap complete all as specified and dircted by Engr-in-Charge.

Providing and fixing in repair 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing in repair 15 mm nominal bore C.P. brass stop cock (concealed) of approved quality conforming to IS:8931 complete all as specified and directed.

Supply and fix in repair Unplasticised P.V.C. connection pipe 15 mm bore with brass union 45 cm long complete all as specified and directed.

Providing and fixing in repair 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete all as specified and directed.

Supply and fixin repair brass shower rose CP with 15 or 20mm inlet 100mm diameter complete all as specified and directed by Engr-in-Charge.

Providing and fixing in repair CP towel rail 600 mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.complete with brackets fixed to wooden cleats with CP brass screws of approved quality and colour complete all as specified and directed.

Dismantling 75 to 80 mm dia CI/Asbestos pipe pipe including stacking of dismantled pipes (within 50 metres lead) complete all as specified and dircted by Engr-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring leaving 10 mm gap for thermal expansion, Single socketed pipes. 75 mm diameter complete all as specified and dircted by Engr-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, leaving 10 mm gap for thermal expansion. 110 mm dia complete all as specified and dircted by Engr-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, leaving 10 mm gap for thermal expansion. 75 mm bend complete all as specified and dircted by Engr-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, leaving 10 mm gap for thermal expansion. 110 mm bend complete all as specified and dircted by Engr-in-Charge.

Providing and fixing 75mm single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, leaving 10 mm gap for thermal expansion complete all as specified and dircted by Engr-in-Charge.

Providing and fixing 110 mm single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring, leaving 10 mm gap for thermal expansion complete all as specified and dircted by Engr-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) complete all as specified and dircted by Engr-in-Charge.

Providing and fixing 15 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes Concealed work, including cutting chases and making good the wall etc, having thermal stability for hot & cold water supply,Concealed work, including cutting chases and making good the walls etc including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and dircted by Engr-in-Charge.

Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes for External work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and dircted by Engr-in-Charge.

Supply and fix in repair 15mm nominal dia CP brass single lever telephonic wall mixer of approved quality and make complete all as specified and directed by Engr-in-Charge,

Supply and fix in repair mild steel CP 20mm external dia and 1.60mm thick curtain rods with two brackets fixed with brass screws and wooden plugs etc complete all as specified and directed by Engr-in-Charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and dircted by Engr-in-Charge.

Supply and fix MS tube hand rail of approved size by welding to steel ladder railing, balcony railing, staircase railing and similar works including applying priming coat of approved steel primer complete all as specified and directed by Engr-in-charge

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc fixed to steel window including priming coat with approved steel primer complete all as specified and directed.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engineer-in-charge

Brick work with common burnt clay With F.P.S.(non modular) bricks machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 complete all as specified and dircted by Engr-in-Charge.

Matirial and albour for cement plaster 15mm thick on the rough side of single or half brick wall in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 Type B1 (using 20mm graded crushed stone aggregated) complete all as specified and dircted by Engr-in-Charge.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete all as specified and directed by Engineer-in-Charge.

Providing and laying in position cement concrete 1:4:8 type D2 (using 40 mm graded stone Aggregate) as a sub base complete all as specified and directed.

Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed

Material and labour for plinth protection 50mm thick in cement concrete 1:3:6 Type C1 (using 20 mm graded stone aggregated) over 75mm thick hard core of gauge n exc 63mm nominal size, well rammed and consolidated and grouted with fine sand, including expansion joint every 2m interval and necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and dircted by Engr-in-Charge.

Providing and fixing 6mm thick both sides Pre-laminated cement bonded HDHMR board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc complete all as specified and directed by engr-in-Charge

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed HDHMR grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc, with auto closing spring loaded hinges (hydraulic type) etc, complete as per direction of Engr-in-Charge

Providing and fixing 19mm thick both side balancing lamination factory pressed HDHMR grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc complete all as specified and directed by Engr-in-Charge

Providing and fixing 200 mm long stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

Providing and fixing Stainless Steel A ISI 304 (18/8) Double bowl Kitchen sink with drain board 510x1040 mm bowl depth 225 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Taking down copper/aluminimum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets , light fitting etc removing materials to store for keeeping in safe custody for reuse and making good disturbed surfaces for walls, floors, etc.complete all as specified and directed.

Taking down the ceiling fan/exhaust fan and painting the same with one coat of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, refixing the fan as required complete all as specified and directed by Engr-in-Charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in cocealed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed. (a) One light point controlled by one ; one way switch

(b) One ceiling/Exhaust/ Wall fan point controlled by one ; one way switch

(c) One 3 pin 5 Amp socket out let controlled by one switch indep board.

Wiring with 2.5 sq mm FRLS PVC insulated multistranded copper conductor cables single core cable in surface/recessed medium class PVC conduit for one 3 pin socket outlet, 5/15Amps, independent, and earthing the point with 2.5 sq mm FRLS PVC insulated, unsheathed, copper conductor single core cable etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing basic all purpose surface and wall mounted LED batten 10 watt, 2 feet, with aluminum housing & integrated electronic driver with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supplying and fixing 15/16 Amps Modular switch on existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 6 pin 15/16 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 3 pin 5/6 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge.

supplying and fixing 3 module (100 mm x 75 mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc complete all as specified and directed by Engr-in-Charge.

Supplying and fixing two module stepped type electronic fan regulator on the exising modular plate switch box including connections but excluding modular plate etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc complete all as specified and directed by Engr-in-Charge.

Wiring for circuit/submain wiring alongwith earth wire with 2 x 4.0 sq mm + 1 x 4.0 Sq mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and dircted by Engr-in-Charge.

Wiring for circuit/submain wiring alongwith earth wire with 2 x 2.5 sq mm + 1 x 2.5 Sq mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and dircted by Engr-in-Charge.

Wiring for circuit/submain wiring alongwith earth wire with 4 x 10 sq mm + 2 x 10 Sq mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and dircted by Engr-in-Charge.

Material and Labour for call bell / buzzer suitable for single phase, 230 V Complate all as specified and directed by Engr-in-Charge.

Supplying and fixing CRCA sheet steel, RAL 9003, powder coated Vertical TPN DB double door, 6' way, IP 54 protection with provision for 3 pole and 4 Pole MCCB as incomer and SP/TP MCBs as outgoings, conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 09, provided with insulated vertical phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties' blanking plates and circuit identification labels including taking down old unserviceable distribution board complete all as required

Providing & fixing 100A rating and 30 KA breaking capacity and four pole MCCB with themomagnetic realease and terminal spreaders in exising cubicle panel board including drilling holes in cubicle panel, making connections, etc. complete including taking down existing unserviceable MCCB all as specified and dircted by Engr-in-Charge.

Supply and fixing 5 to 32 Amps rating , 240/415V, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioining etc as required including takingdown existing unserviceable MCB complete all as specified and dircted by Engr-in-Charge.

Supplying and fixing 20/32A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20/32A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc complete including taking down existing unserviceable socket outlet all as specified and dircted by Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed by Engr-in-Charge.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including taking down old unserviceable earthing complete all as specified and directed by Engr-in-Charge.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from eath electorde including conneciton with G.I. thimble excavation and re-filling as required including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and fixing Heavy duty Electric chimney of size 90 cm with stainless steel baffle filter and suction capacity not less than 1150 cum/ hr and outlet pipe of 150 mm dia complete all as specified and directed by Engr-in-Charge.

Shree Ayyappa Engineering (BID ID -3142523)

Vipul Enterprises (BID ID -3143058)

Vandan Enterprises (BID ID -3142291)