Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.2 LAccepted-AOC OPPOSITE VIPUL GAS AGENCY HOSPITAL ROAD SOLAN H P | SOLAN | SOLAN | HIMACHAL PRADESH | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹2.9 L+₹65,000 (29.5%)Rejected-Finance V P O MANPURA TEHSIL BADDI DISTRICT SOLAN HP | SOLAN | HIMACHAL PRADESH | 171102 | L-2 | Rejected-Finance Rejected | |
| 3 | L-3₹3.0 L+₹75,000 (34.1%)Rejected-Finance | L-3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | SACHN KUMAR L3 | J.K. ENTERPRISES L2 | ROYAL ENGINEERING WORKS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing Installation i/c testing and commissioning at site horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/KSB/Kirloskar/Becon weir/BE/Jyoti as per IS-1520-1980 / IS 5659 - 1970 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear / raw water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage / Slipring drip proof induction motor of standard make such as Kirloskar/ Crompton/ Bhel/NGEF/ GEC/ Siemen / Jyoti/ ABB and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- (1 Set of 20 HP complete i/c allied accessories) | 1 | 20 HP | 2,95,000 ₹2,95,000 | 2,85,000 ₹2,85,000 | 2,20,000 ₹2,20,000 Lowest |
| 1.01Head : 235.29 mtr | ||||||
| 1.02Discharge : 1.970 LPS. | ||||||
| 1.03Length-1008 mtrs Dia = 50 mm | ||||||
| 2.00Providing ICTP Main Switch with HRC fuses / Side handled operated Change over switch of L&T/Crompton/Standard/Havells make suitable capacity Operational rating as per IS: 4064 (Part - II) 1978 with up to date amendments immediately after the power meter of HPSEB . (1 No.) | ||||||
| 3.00Providing M.S. sheet, steel fabricated floor mounted closed ( Almirah type) switch board including angle iron post of suitable height and size ISA 40x40x6mm, duly painted, with steel sheet of 16 gauge comprising, capable of mounting the following accessories with all internal connections:-(1 No.) | ||||||
| 3.01Providing Installation i/c testing and commissioning at site A.C.B./ OCB of Kilburn/ Havell/MDS/Standard/ L&T/MEI/GEC make of suitable capacity on incoming feeder with or without initial oil filling as the case may be with neutral linked under voltage releases as per IS: 2516 (Part - II) 1985 with up to date amendments with. (1 No.) | ||||||
| 4.00Providing Installation i/c testing and commissioning at site suitable oil immersed star delta/ direct on line/ Auto trasformer/ starter rotor starter of MEI/ Kilburn/ Jyoti/ L&T/ Siemens make as per IS: 8544 -1979 with up to date amendments for Squirrel Cage motor mounted on panel board with magnetic type overload release and dashpot time lag, under voltage release with or without initial oil filling as the case may be with single phase preventor as per IS 1248 (P-V)-1983 with up to date amendments. (1 No.) | ||||||
| 5.00Providing and laying copper PVC insulated armoured power cable ( one cable carrying all the three phases) of suitable size and capacity to and all other electrical equipments as per IS: 1554 (P-I)1988 or latest with upto date amendments of Siemens/ IEC/ICC/GICO/Grandly/National make including all other accessories such as thimbles, flexible, pipes solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor complete in all respects. (1 Job.) | ||||||
Tender Value
₹2.5 L
EMD Value
₹5,000
Closing Date
27 Jun 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baddi
(SH- S/E of Centrifugal pumping machinery along with allied accessories of LWSS Badhol ).
2025_HPIPH_107645_1
NIT No. 4318-4418 Dt. 16-06-2025
Open Tender
Civil Works
Item Rate
120 days
Baddi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹5,000
9 Sept 2025
17 Jun 2025
27 Jun 2025
17 Jun 2025
27 Jun 2025
17 Jun 2025
17 Jun 2025 - 26 Jun 2025
Amount
Providing Installation i/c testing and commissioning at site horizontal spindle horizontal split casing/end suctions (back full out arrangement) single/double/ multistage centrifugal pump or combination of pump in series of recommended make such as Mather and Platt/KSB/Kirloskar/Becon weir/BE/Jyoti as per IS-1520-1980 / IS 5659 - 1970 with up to date amendments, read with IS: 9137-1978 or latest edition suitable for lifting clear / raw water for under mentioned characteristics with bronze impellers/priming funnels, casing ring and shaft sleeves of bronze, shaft of steel grade EN-8 with cast iron casing coupled directly through a flexible coupling on a MS/Cast steel base plate ( base plate to be from the manufacturers of the pumping unit only) to Squirrel Cage / Slipring drip proof induction motor of standard make such as Kirloskar/ Crompton/ Bhel/NGEF/ GEC/ Siemen / Jyoti/ ABB and suitable for operation on 400 (+)/-) 10% volts, 50 cycles/second, 3 phase AC electric supply. The power of electric motor should be at least 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-) 25% of the duty point head. The motor should be as per IS: 325-1978 with up to date amendments read with IS: 900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements:- (1 Set of 20 HP complete i/c allied accessories)
Head : 235.29 mtr
Discharge : 1.970 LPS.
Length-1008 mtrs Dia = 50 mm
Providing ICTP Main Switch with HRC fuses / Side handled operated Change over switch of L&T/Crompton/Standard/Havells make suitable capacity Operational rating as per IS: 4064 (Part - II) 1978 with up to date amendments immediately after the power meter of HPSEB . (1 No.)
Providing M.S. sheet, steel fabricated floor mounted closed ( Almirah type) switch board including angle iron post of suitable height and size ISA 40x40x6mm, duly painted, with steel sheet of 16 gauge comprising, capable of mounting the following accessories with all internal connections:-(1 No.)
Providing Installation i/c testing and commissioning at site A.C.B./ OCB of Kilburn/ Havell/MDS/Standard/ L&T/MEI/GEC make of suitable capacity on incoming feeder with or without initial oil filling as the case may be with neutral linked under voltage releases as per IS: 2516 (Part - II) 1985 with up to date amendments with. (1 No.)
Providing Installation i/c testing and commissioning at site suitable oil immersed star delta/ direct on line/ Auto trasformer/ starter rotor starter of MEI/ Kilburn/ Jyoti/ L&T/ Siemens make as per IS: 8544 -1979 with up to date amendments for Squirrel Cage motor mounted on panel board with magnetic type overload release and dashpot time lag, under voltage release with or without initial oil filling as the case may be with single phase preventor as per IS 1248 (P-V)-1983 with up to date amendments. (1 No.)
Providing and laying copper PVC insulated armoured power cable ( one cable carrying all the three phases) of suitable size and capacity to and all other electrical equipments as per IS: 1554 (P-I)1988 or latest with upto date amendments of Siemens/ IEC/ICC/GICO/Grandly/National make including all other accessories such as thimbles, flexible, pipes solder, nuts and bolts, cable glands etc. laid in pipes or trenches under floor complete in all respects. (1 Job.)
J.K. ENTERPRISES (BID ID -528613)
SACHN KUMAR (BID ID -529169)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .