Sanitary work upto first manhole for academic block at Medical College Baramulla

Amount

Providing and fixing water closet squatting pan (Indian type WC pan) of approved brand with 100mm sand cast Iron P or S Trap, 10 litre low level white PVC flushing cistern with manually controlled device (handel lever), conforming to IS 7231, with all fittings & fixtures complete including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern WC pan of size 580 x 440mm with intergal type foot rests. Hindware make - Orissapan (Comfort) Cat No 20070, Cera make - Orissapan (Calina) Cat No S3010102 or Equivalent

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Hindware make - Cat No 20079, Cera make - Cat No S1057101 or Equivalent

Providing and fixing wash basin with C.I. brackets, incl. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm Hindware make - Cat No 10100 Cera make - Cat No S2040119 or Equivalent

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm Make Jaina Jupitor SBSD 03 / Nirali Illigance SBSD OR Equivalent

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Cera , Jaquar(continental series ) or equivalent)

Providing and fixing toilet paper holder. Of C.P. Brass. Make Hindwar Cat No - F880003 or Equivalent

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. (Cera, Jaquar (continental series ) or equivalent

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(Cera , Jaquar(continental series ) or equivalent)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (Cera , Jaquar(continental series ) or equivalent)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.(Cera , Jaquar or hindware)Including concelled stopcock

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of Black/ Grey/Red Color

Providing and fixing brass bib cock of approved quality : (Cera , Jaquar(continental series ) or equivalent) 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : (of FINOLEX , ASHIRWAD or Equivalent brand ) 45 cm length, 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. Make Hindware Model No F730011/ Jaquar Continetal series or Equivlanat

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore. Make Hindware Model No F730013 / Jaquar Continetal series or Equivlanat

Providing, fixing, testing and commissioning of CP brass central hole wash basin mixer without popup waste with brass nuts casted spout complete including cutting and making good wherever required. Make Hindware Model No F730009 / Jaquar Continetal series or Equivlanat

Providing, fixing, testing and commissioning of CP brass swan neck sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required. Make Hindware Model No F730023 / Jaquar Continetal series or Equivlanat

Providing & fixing grab bar in toilets for physically handicapped with non-slip gripping surface complete in all respects, including cutting and making good the wall wherever required. Make Vijay / Hindware

Providing & fixing 600 mm grab rail in toilets for physically handicapped with non-slip gripping surface complete in all respects, including cutting and making good the wall wherever required. Make Vijay / Hindware

Supply, fixing, testing and commissioning of storage type automatic electric hot water heater made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge steel tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, non return valve and pressure release valve complete in all respect including testing etc. (Horizontal/Vertical) (of Venus , Jaquar brand) 25 litres storage capacity

P/F of 32mm dia PVC waste pipe for sink or wash basin inc. PVC waste fittings complete. (finolex, Ashirwad brand or equivalent )

Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge & as per approved architectural drawings. Granite work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

SOIL, WASTE AND VENT PIPES: Providing and fixing sound insulated Polyproplene piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with 3 layer pipe made of PP-C + PP-MV + PP-C in Blue Ral 5014 (halogen and calcium free) colour, push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe = 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength > 24 N/mm2,with all necessary fittings in blue colour, fitted with factory fitted lip ring incluiding painting with ordinary cement based paint for external installation. Of POLO PLAST OR PESTAN S LINE. PP 110 OD mm dia Pipes

Providing and fixing PP white Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections. Of POLO PLAST OR PESTAN S LINE. 110 mm inlet & 110 mm outlet Long ht

Providing and fixing 125 mm dia, 1 mm thick stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.Of JAQUAR , CERA

Providing and fixing floor drain (FD) with 50mm/40mm outlet and one 40mm inlet for waste, with SS grating (adjustable height), having 50mm water seal. Of POLO PLAST OR PESTON S LINE with SS Jaquar grating

Providing and fixing sound insulated Polyproplene piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with 3 layer pipe made of PP-C + PP-MV + PP-C in Blue Ral 5014 (halogen and calcium free) colour, push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe = 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength > 24 N/mm2,with all necessary fittings in blue colour, fitted with factory fitted lip ring. (For Indirect waste/ Wash Basin/Urinal/Sink/Floor Drain Of POLO PLAST OR PESTAN S LINE

a)PP 40mm OD Pipes

b)PP 50 mm OD Pipes

Providing, fixing, testing and commissioning of pipe inlet fittings fabricated with maximum 3 inlets 40, 50 & 75 mm OD size fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/rubber ring joint complete . Of POLO PLAST OR PESTON S LINE

Providing and fixing clean out pipe (door piece) for cleaning as required complete Of POLO PLAST OR PESTAN S LINE 100mm dia

P/F Polo Ultra-V (UV protected) ML5 PP-r PE80 glass fibre compound 5 layer pipe in black colour classified according to DIN EN 21003 having linear expansion coefficient 0.038mm/mK with proprietiry Polo-Ecosan fittings complete, of food grade quality,jointing to be done by socket fussion including painting with cement/other paint as required for external/exposed installation. (for use in shafts, basements, terrace all internal and external applications) (of POLO PLAST or PESTAN S LINE) Concealed work - Internal work - Exposed on wall

20x2.8 mm (OD)

25x3.5 mm (OD)

32x4.4 mm (OD)

40x5.5 mm (OD)

50x6.9 mm (OD)

63x8.6 mm (OD)

75x 10.3 mm (OD)

Providing and fixing, testing and commissioning of full bore brass ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete:in all respects (PN 1.6). Tested to 25 kg/cm2 hyd. (of POLO PLAST OR PESTAN S LINE). 25 mm nominal bore

Providing and fixing, testing and commissioning of cast iron slim type butterfly PN 1.6 valve complete corresponding flanges, bolts, nuts 1.5 mm thick EPDM rubber gasket. (IS: 13095) of POLO PLAST OR PESTAN S LINE

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

100 mm nominal bore

Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete. POLO PLAST OR PESTAN S LINE. 40 mm dia

Providing and fixing, testing and commissioning CI double flanges suction strainer (PN 1.6) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. Installed at terrace for water supply and fire line downtake pipes. of POLO PLAST OR PESTAN S LINE. 100 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

100 mm diameter

150 mm diameter

Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround stoneware/RCC pipes including in bed for pipes to be laid in trenches as per standard details.

a)100 mm diameter

b)150 mm diameter

Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. ( excluding cost of cement) Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty ) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg): 150 x 100 mm size P type With sewer bricks conforming to IS : 4885 (For Sewer)

Extra for depth for manholes Size 90 x 80 cm With sewer bricks conforming to IS : 4885.

Cutting holes up to 15x15 cm in R.C.C. floors/roofs/Beams/Walls for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and laying water proofing treatment in sunken portion of Gutters, WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying: (Tapecrete of CICO or approved equivalent) (incl. cleaning the surface and removing mulba from the surface ) (a) 1st layer of slurry of cement @ 0.488kg/ Sqm. mixed with water proofing cement compound @ 0.253kg/ Sqm. This layer will be allowed to air cure for 4hours. (b) 2nd layer of slurry of cement @ 0.242kg/ Sqm. mixed with water proofing cement compound @ 0.126 kg/ Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry but excludes cost of cement.

Providing and laying stone Dust blended with cement (10 % ) under sunkun portions of Bathrooms incl. compacting , watering , densifying ,all complete

All BOQ items are inclusive of cost & carriage of materail complete job

M/S BHAT CONSTRUCTIONS