SPECIAL REPAIRS TO INTERNAL/EXTERNAL LIGHT FITTINGS OF TECH AND OTM AREA AT AIR FORCE STATION PUNE (PHASE-II) UNDER GE (AF) LOHEGAON

Taking down old light fitting along with fixture and Supply & fix LED tube light fitting comprising of 20 watt Aluminium T-8 LED tube rod with inbuilt driver and acessories, the tube rod shall have min efficiency of 100 Lm/Watt,rated system lifetime of 50000 burning hours at L70.The lumanaires should have colour temperature of 6500k and CRI>80,IP 20 rating with THD<15% and PF>0.95 including providing prewired CRCA box type batten with holders for fixing LED Tube rod along with provision of 02 no PVC square block for fixing of the fitting with necesary screws, including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal, complete as specified and and as directed by Engr-in-charge. (NOTE : All tubelights should be marked Serially numbered and entered in tubelight register (Inventary) duly marked with Qtr/block number and Signed by Engr-incharge , JE and contractor and vetted by User and AO and register shall be submitted while claiming the RAR and FB)

Taking down cearfully light fitting any type , complete as specified and and as directed by Engr-in-charge.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire, complete as specified and and as directed by Engr-in-charge.

Taking down cearfully by unscrewing the unserviceable Main DB/VTPN/TPN incl MCCB/MCB with porcelain cutouts etc , complete as specified and and as directed by Engr-in-charge.

Supply and fixing LED mirror light fitting 10 Watt including electrical connections, complete as specified and and as directed by Engr-in-charge.

Supply and fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 35 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device, Thd<10% including 40mm dia & luminous efficiency not less than 100 lumens /Watt PF not less than 0.95 CRI not less than 70 including bracket 60cm long/ clamp 25x4 mm/ nut bolts etc. The light fittings shall be fixed on pole/bldg with , complete as specified and and as directed by Engr-in-charge.

Dismentling and taking down Old Panel box and Supply install, testing and commissioning of LT wall mounted/Floar mounted in free standing stand made out of equal angle iron of size 45 mm x 45 mm x 5 mm of height upto 600 mm including foundation indoor Panel board factory fabricated made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing MCCB, MCB and TPN copper bus bars of rating not less 1.5 times the rated cap of incomer MCCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. A detachable predrilled gland plate of thickness not less than 2 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front openable lockable /openable by key, The Panel shall be manucatured from CPRI approved manufacturerof makes stipulated. The cost is inclusive of disconnecting existing cables, reconnecting the cables with lugs & glands, making good of distribued PCC all as directed, including following acessories:- (a) Incoming MCCB FP 415 Volt 200 Amps 25 kA - 01 Nos (b) Outgoing MCB TPN 100 Amps, 230 Volts , 10 kA - 1 Nos (c) Outgoing MCB TPN 63 Amps, 230 Volts , 10 kA - 6 Nos (d) Outgoing MCB SPN 63 Amps, 230 Volts , 10 kA - 10 Nos (e) Panel Indicator lamp (f) Heat resistance sleeve (g) Bus bar support Epoxy 50 mm (h) Brass nut bolt washer 10x15mm Note :- (i) The cost quoted is deemed to be inclusive of taking down of old panel/DB box, incl disconnecting existing UG cable , Submain wiring and reconnecting cable gland, Copper/Aluminium lugs etc. (ii) Layout diagram of panel shall be got approved by GE.

All as per item No 7 above but with consisting following switchgears and accessories :- (a) Incoming MCCB FP 415 Volt 125 Amps 25 kA - 01 Nos (b) Outgoing MCB TPN 63 Amps, 230 Volts , 10 kA - 1 Nos (c) Outgoing MCB TPN 40 Amps, 230 Volts , 10 kA - 6 Nos (d) Outgoing MCB SPN 40 Amps, 230 Volts , 10 kA - 10 Nos

Supply and fix Vertical double door Distribution board TPN 4 way with busbar and consisting of MCCB 4pole 125 Amps 25 KA - 1 No complete including fixing on wall surface and making good the disturbed surface making all necessary incoming and outgoing (LT UG cable / submain wiring) LT connections by providing proper size copper/Aluminium thimbles/Lugs (Ring & Pin type) all as required on site complete all as specified and directed by Engr-In-charge. (Note : Cost of MCCB 125 Amps, 4 pole, 25 KA -01 Nos is included in quoted rates)

Supply and fix Vertical double door Distribution board TPN 6 way with busbar and consisting of MCCB 4pole 125 Amps 25 KA - 1 No complete including fixing on wall surface and making good the disturbed surface making all necessary incoming and outgoing (LT UG cable / submain wiring) LT connections by providing proper size copper/Aluminium thimbles/Lugs (Ring & Pin type) all as required on site complete all as specified and directed by Engr-In-charge. (Note : Cost of MCCB 125 Amps, 4 pole, 25 KA -01 Nos is included in quoted rates)