Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹13.7 L+₹1.3 L (10.7%)Rejected-Finance N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹14.7 L+₹2.3 L (18.8%)Rejected-Finance NO 17 PETER GNANA PRAKASAM NAGAR MARIYAMMAN KOVIL PO THANJAVUR 611501 | 611501 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹16.1 L
EMD Value
₹32,500
Closing Date
12 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Air Force
Garrison Engineer Air Force
ADDITION ALTERATION TO AIRMEN MESS AT AFS THANJAVUR.
2024_MES_646670_1
8116/E8
Open Tender
Civil Works
Item Rate
90 days
Thanjavur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Air Force
₹32,500
8 May 2024
15 Mar 2024
13 Apr 2024
15 Mar 2024
12 Apr 2024
30 Mar 2024
Amount
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc not exceeding 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard / dense soil complete all as specified as directed.
M&L Plain cement concrete PCC type 1:4:8 (using 40 mm graded aggregate) in foundation, filling and mass concrete all as specified and as directed.
M&L for RCC Nominal Mix type A1 (1:1.5:3) (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC Nominal Mix type A1 (1:1.5:3) (using 20mm graded aggregate)as in Columns, pedastral, pillars, piers, posts and struts complete all as specified and as drected.
M&L for Formwork for flat rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.
M&L for Formwork for square rough finished surfaces to sides of columns, pillars, posts, struts, piers and stanchions complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M&L for mild steel TMT bars over 5mm dia to 8 mm dia, cut to length, bent to shape required, including cranking, for stirrups, spacers and binders etc., and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
M&L for cement concrete Type B-1, 1:2:4 (using 20 mm well graded stone aggregate) including necessary form work in columns, plinth courses, parapets and railings upto 60 cm in height, copings, complete all as specified and directed.
S & F rolled mild steel sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.
S & F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.
S&F rolled mild steel sections as in truss (framed), trussed, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel of flat setion) including distance pieces, cleats etc , conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.
S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ 150 as in roof covering fixed with self tapping screws complete all as specified.
M&L for aluminium wind tie of any size having not less than 0.68 Kg per Rm fixed with self tapping screws with integral EPDM washer in roof covering complete all as specified and as directed.
S&F for Mild steel screw bolts (machine made 16 mm dia) with hexagonal or square heads at one end and screwed at onother end, eachscrewed end to be fitted with washer and one hexagonal or square nut, exc 15cm but n exc 22 cm in long all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified as directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar, removing rubbish off the permises complete all as specified.
M&L machine cut kota stone slab flooring 20 to 25 mm thick over cement screed bed base laid in 20 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.
M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing, granite slab edge with mirror polishing complete. (Note : Colour of granite as approved by GE)
Rounding (chamfering) to edge of marble/granite slab edge with mirror polishing such complete all as specified as directed.
M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.
All as per item No 27 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10mm thick backing coat in CM (1:3) complete all as specified.
Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified.
Taking down door shutters and re-fixing in same opening exc 1 Sqm and n.exc 2 Sqm complete all as specified.
S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified as directed.
S&F 30mm thick, Ist class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a) complete all as specified as directed.
M&L for preperation of new wooden surfaces of any description and appying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S&F Aluminum alloy anodized sliding door bolt 250 mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified as directed.
S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified as directed.
S&F extruded aluminum alloy handle fabricated type anodized 150 mm long complete all as specified as directed.
S&F 100mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified as directed.
S&F floor door stoppers, brass body and tounge with hard drawn steel spring, overall length of cover plate 140 mm complete all as specified.
S&F aluminium (dia cast) body, door closer hydraulically regulated designation No. 2, universal type, suitable for door shutters of 701 to 850 mm width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
S&F 2nd class HW plain fillet rectangular or triangular section wrought fixed scews for holding wire mesh n.exc 3 sqcm in cross sectional area complete all as specified.
Hacking out old broken glass (any thickness size , quality, description)from wooden frame or stone concrete or bricks surrounding glazed with putty or fixed with beads n.exc 1.5 Sqm in each pane complete all as specified as directed.
S&F 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square n. exe. 0.5 sqm in each pane complete all as specified as directed.
Taking down chowkats of frames .esc. 1.5 Sqm each (without taking off shutters from frames) complete all as specified.
S&F plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, IInd class H/W complete all as specified.
M&L for 19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work as incub board,kitchen cabinets (with anti termite proof) all as specified and as directed.
M&L for 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufaturer's instructions all as specified.
S&F auto hinges stainless steel suitable for kitchen cabinets,CB, Shelves etc
S&F extruded aluminum alloy handle fabricated type anodized 100mm long complete all as specified as directed.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified as directed.
M&L for 100mm thick PCC 1:4:8 type D2 sub base complete all as specified as directed.
M&L for Chequered cement concrete tiles 30 cm x 30cm x 25mm thick,with grey cement and pigments set, jointed and pointed in neat cement slurry in floors includig 20mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for Removing excavated material and debris n.exc. 50m and depositing where directed at al level not exc. 1.5 m above the starting point, complete all as specified
M&L for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in kerbs or mud pots, rounded or chamfered on edges, lintels up to 1.5 m cleatr span, seismic oan other bands, plinth courses, plinth coursed including necessary form work complete all as specified and directed.
M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 all as specified and as directed.
M&L for rendering 10mm thick on brick or concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified as directed.
M&L for preparation of new wall surface and applying two coats of cement base paint over a coat of primer complete all as specified as directed.
S&F welded steel fabric wire to wood or to steel members with weight not less than 4 Kg per Sqm complete all as specified and as directed.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified as directed.
M&L for UPVC roof gutter of size 220mmX195X195 mm of minimum 2 mm thick fixed to wall / roof projection etc complete all as specified.
M&L for UPVC runner drop to suit item No. 61 above complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid and fixed in wall / trenches or in floors complete all as specified as directed.
S&F PVC (SWR) bends any radius 110mm dia complete all as specified.
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall and surface on ceiling shed incl cutting & chases( making good all to the disturbed surfaces as per existing) and including modular flush metal boxes , modular cover & Plates suitable for modular fittings, concealed type for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified as described below:-
One light point controlled by one way switch 5 amp complete.
One Exhaust fan point controlled by one way switch 5 amp and one regulator complete.
One 3 pin 5 Amps socket point controlled by one switch on independent board.
All as per item No. 65.30 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent complete all as specified and as directed .
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.
Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.
Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting
S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, 12 way complete all as specified.
Supply & fixing MCB SP 5 - 32 Amps,240V, 'C' series ,bracking cap10KA complete all as specified and directed.
Supply & fix MCB DP 40 Amps,' C' series , bracking cap10KA, 240V complete all as specified and directed.
Supply and install of 35W LED building security light fitting with voltage range of 140-280V including all connections complete all as specified.
M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts
M&L for earthing complete with galvanized steel earth plate electrode size 600 mm x 600 mm x 6.3 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron wire 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm dia connected to main earth lead on pole or control board and GI pipe light grade 20 mm dia for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC (1:3:6) type C-2 including necessary excavation and earth work all as shown in electrical plate No 3 connected to earthing test point and testing on completion complete all as specified & directed. Note : GI wire and protection pipe upto 7.5 Mtr length from earth electrode shall be included in quoted rate of item.
Cutting holes for air ducting of exhaust fan in Circule / square shape or as per site requirement into or through brick walls built in cement mortar of superficial area exc 400 sq.cm but n.exc 0.10 sq.m to a depth of 30cm including making good in cement mortar 1:3 or cementconcrete 1:2:4 type B-l as required and rubbish off the premises.
Supply and fix exhaust fan 450mm sweep metallic body, heavy duty type , single Phase 240 Volt alongwith blade,frame and louvers complete with connection all as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.
Excavation in trenches in any type of soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables/GI pipe and getting out including all as specified.
M&L for clean dry sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and levelling complete all as speccified.
M&L for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.
M & L for GI Pipe light grade 50mm bore for cable protection in floor/road crossing/along pole complete all as specified and as directed.
M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for filing of road cuttings, repair of PCC Path etc ,including provision of necessary form work, finishing even and smooth without using extra cement complete all as specified
M/s KM Marimuthu Achary
M/S. SRI RAMANUJA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .