FACADE CONSERVATION AND RESTORATION WORKS OF HERITAGE BUILDINGS IN GANESH GHATI ZONE.(E-11_USCL_work No. 02)

Amount

Removal and refixing of stone chajja 50 to 75mm thick, stone used to be similar to the existing ones at the site, cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respects in lime surkhi mortar (1 lime putty : 2 surkhi).

Repairing of existing historic window/doors for hardware, rotten/ deteriorated parts. Proper fixing and making it operational with locking possibility including moulding, carving and polishing. Refer drawings for window types.

P/F of Fine dressed & machine cut edges 75 mm thick chittor/nimbahera/Gogunda/Dungarpur stone flooring over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of stone complete with grinding & polishing as per the intructions of Engineer In-charge complete in all respects.

P/F of Fine dressed & machine cut edges 25 mm thick chittor/nimbahera/Gogunda/Dungarpur stone flooring over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of stone complete with grinding & polishing as per the intructions of Engineer In-charge complete in all respects.

Restoration of stone niches in udaipur style including base, verticle stone ,lintel mehrabs etc and all masonry plaster, lime kara , araish complete as per direction of conservation architect.

Providing and fixing new /restoration of decorative stone door frames & architraves stone mouldings, Bends, as per existing design and details found on site. Damaged portions of the original stone part to be carefully remove without damaging adjacent areas, & replacing the same with new detail of the same size & design.and complete in all respects as per direction of conservation Architect.width and depth of stone bend up to 150 mm.

Removal and Refixing of loose stone cladding and pointing with rich Lime mortar & proper adhesive with pigment to match the shade of stone complete. Thickness 50 to 100 mm with nessacary joining accassory etc. Complete .

Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in lime mortar 1:2 (1 lime : 2 coarse sand), including making the necessary chases.

Providing and applying two or more coats of linceed oil on heritage wooden door and window on cleaned and prepared sub base/base surface ie 3.5sqmt per litre per coat and difference between each coat minimum 3days or absorb linseed oil as per direction of conservation architect.

Providing & fixing ornamental (both side carved)Nimbahera/Gogunda/Dungarpur/Chittor stone Jali as per existing desing & pettern with fine finising and grained lime surki mortar 1:2 incuding all scaffolding, lead and lift complete on all respected. the expose rectangle area shall be mesured for payment at the place directed by Engineer Incharge Avg thickness of stone upto 50 mm

Providing,carving and Fixing of building signages in Nimbahada/Chittor/Dungarpur/Gogunda equivalent approved sand stone of size 750x450x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the building wall complete as per details and drawings and as directed by engineer incharge.

Providing,carving and Fixing of information signages in Nimbahada/chittor/equivalent approved sand stone of size 1000x500x50 mm.Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 100 x 100x 1350 above ground and 1/3 of total height of post shall be embedded in ground with neccesary earthwork and concreting etc.as per the intructions of Engineer In-charge complete in all respects.

Removing damage solid stone Architectural elements(Pillers stone, Plinth stone, sill stone, pannel stone,Niches etc) and Providing & fixing new stone ( plain / ornamental) in white Chittor/Nimbahera/Gogunda/Dungarpur with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect.

Removing damage solid stone Architectural elements(Pillers stone, Plinth stone, sill stone, pannel stone,Niches) and Providing & fixing new stone ( plain / ornamental) in white Marble Stone with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect.

Providing and fixing new Stone Ornamental Architectural elements(Mehrab, Surface pannels, Oranmental bends) in Nimbaheda/Gogunda/Dungarpur/Chittor Stone and fixed with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect. Thickness up to 100 mm

Providing and fixing new Stone Ornamental Architectural elements(Mehrab, Surface pannels, Oranmental bends) in Marble Stone and fixed with mechanical/ manual system carefully as per existing stone design & pattern as directed by engineer in charge complete in all respect. Thickness up to 100 mm

Providing and fixing Chittor/Nimbahera stone Kangura on top of the wall as per Udaipur traditional practice and existing design pattern and size up to 450 mm height including all scaffolding, lead & lift and as per the intructions of Engineer In-charge complete in all respects.

Providing and refixing of 1 mm thick 150 mm height strip Ornamental G.I. sheet strip (Udaipur pattern) hand /C.N.C with primer and two coat of synthetic enamel paint.

Providing and fixing of traditional thin wall (Plain and Ornamental) 100-150 mm thick made in combination of tile bricks and stone pieces fixed in interlocking pattern in lime surkhi mortar (1:2 ) complete in all respect as directed by engineer incharge.

Providing and fixing of traditional thin wall (Plain and Ornamental) made in Nimbahera stone up to 100 mm thickness and stone pieces fixed in interlocking pattern in lime surkhi mortar (1:2 ) and araldite and stone dust and complete in all respect as directed by engineer incharge.

Removing of sign boards including frame and electrical wires etc complete as directed by engineer incharge.

Removal , providing and re fixing of stone inverted lamcha (lattoo) with stone base and moulded as per existing design with fine finishing in grinded lime mortar 1:2 i/c all lead and lift complete in all respect.dia - 200 mm and Height 250

Removal , providing and re fixing of stone pipe holder (for railing , flag and canopy pipes ect )moulded as per existing design with fine finishing fixing in grinded lime mortar 1:2 i/c all lead and lift complete in all respect. - 75mm thick

Providing and fixing new Deodar/ Teak wooden jali/ railing of the balcony/ parapet etc. as per design and pattern instructed by the conservational architect including all necessary faiting like screw, nails etc. item to also include all the moulding on the railing contractor to insure that the moisture contain is well within the IS code all timber to be free Knots cracks. It includes the cost of polishing and finishing in all respect.

Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in lime mortar 1:2 (1lime : 2coarse sand), including making the necessary chases.

Providing and Fixing Lime/Mud/Masonary Bluster with Lime Kara finish as per detail and design as per the Engineer in Charge.

Providing and fixing of Helifix make Hi-fin reinforcement Helibars of 8mm dia, single bar in one slot, MOC Austenitic stainless steel, ASTM 304, having cross section area of 10.5 mm² , pitch 38/40, with UTS 13.7 kN, shear strength 7.2 kN, along with Helibond Grout, a special cementitious grout with low expansion, non gassing and injectable with exceptional thixotropic properties having compressive strength of 45 N/mm² at 28 days. Including chasing of bedjoints for HeliBars, cleaning to achieve good bonding of HeliBar with HeliBond grout in the slot of masonry ensuring that it remains tight at the joint after curing, including Providing and filling of general purpose styrene free resin with the help of manual pressure applicator and nozzle, to be used for anchoring helical bars wherever needed at locations as per instructions provided by Structure Engineer/ Helifix, excluding Staging & Scaffolding, at various places where there is a crack in brick/stone/block masonry as directed by structural engineer / Helifix. - HeliBar 8mm

Providing, supplying and fixing of Helifix make Hi-Fin reinforcement pins - CemTie having 10mm Dia and specified length. MOC. Austenitic Stainless Steel, ASTM 304, having cross section area of 14.8 mm², pitch 45/48, with UTS 17.5 KN as per structural drawing & design in the brick/stone masonry wall. Drilling a 18 to 20mm dia hole by mechanical means at marked positions at the required angle and to the specified depth from the outer face of the wall. Cleaning out all dust from the hole and thoroughly flushing with water. Ensure the hole is damp or primed prior to inserting the nozzle. Attach the required length of CemTie pinning Nozzle to the gun and grouting same with Helifix make Helibond grout, a special cementious grout with low expansion, non-gassing and injectable with exceptional thixotropic properties having compressive strength of 45 N/mm² at 28 days, is to be used to bond the stainless steel Hi-fin reinforcement bars and pins with the help of pressure gun to be injected in the drilled holes of masonry, ensuring that it remains tight after setting as directed by structural engineer/Helifix. All above excluding staging/scaffolding. - CemTie 10mm

Providing, supplying and fixing of Helifix make Hi-Fin reinforcement pins - CemTie having 8mm Dia and specified length. MOC. Austenitic Stainless Steel, ASTM 304, having cross section area of 10.5 mm², pitch 38/40, with UTS 13.7 KN as per structural drawing & design in the brick/stone masonry wall. Drilling a 16 to 18mm dia hole by mechanical means at marked positions at the required angle and to the specified depth from the outer face of the wall. Cleaning out all dust from the hole and thoroughly flushing with water. Ensure the hole is damp or primed prior to inserting the nozzle. Attach the required length of CemTie pinning Nozzle to the gun and grouting same with Helifix make Helibond grout, a special cementious grout with low expansion, non-gassing and injectable with exceptional thixotropic properties having compressive strength of 45 N/mm² at 28 days, is to be used to bond the stainless steel Hi-fin reinforcement bars and pins with the help of pressure gun to be injected in the drilled holes of masonry, ensuring that it remains tight after setting as directed by structural engineer/Helifix. All above excluding staging/scaffolding. - CemTie 8mm

Bidder Name

Amount

BORDIA AND ASSOCIATES

VIJAYPRATAP SINGH CONSTRUCTIONS PRIVATE LIMITED

VIJAYPRATAP SINGH CONSTRUCTIONS PRIVATE LIMITED

VIJAYPRATAP SINGH CONSTRUCTIONS PRIVATE LIMITED