Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹22.4 L
EMD Value
₹44,900
Closing Date
22 Jan 2026, 5:00 pmClosed
GM(P)
YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY
Pond rejuvenation in village gadana .YEA WC-06
2026_YEIDA_1105538_7
YEA/GM(PROJECT)/2025/453 DT-09/01/2026
Open Tender
Civil Works
Fixed-rate
120 days
YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY
Please refer Tender documents.
5 documents required · 5 mandatory
₹840
₹44,900
3 Jul 2026
13 Jan 2026
23 Jan 2026
13 Jan 2026
22 Jan 2026
13 Jan 2026
Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared
Pumping out water by Diesel pump of discharge capacity of 4000 lts per hour including fuel operator , suction & delivery pipes of size 4'' X 4'' length 150 as per direction of Engineer in Charge
Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance with requiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters
Add extra for sludge/mud/liquid 50% of Excavated earth 25% of H.No.3 UP PWD
Providing and laying in position cement concrete with 4 cm gauge approved stone ballast c sand and cement in pro of 8:4:1 including supply of all material labour tools and plants etc req for proper comp of work
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note:- Cement content considered in this item is @330 kg/cum.Excess/less cement used as per design mix is payable/recoverable All work up to Plinth level. UPPWD/SOR/DAR/5.33.1
Rinforcement for R.C.C. work including straightening. Cutting Bending placing in position and bending all complete upto plinth level using Hot rolled Deformed bars. (UPPWD/SOR2020/5.22.3)
Centering & Shuttering including strutting. propping etc and removal of form work for. Foundation footing bases of column etc. (UPPWD/SOR-2020/5.9.1)
Suspended Floors, roofs, landings, balconies, and access floors. (UPPWD/SOR-2020/5.9.3)
Edges of slab and breaks in floor and walls under 20cm wide. (DAR/5.9.16.1/ Based on UPPWD/SOR-2020)
Laying non-pressure NP2 class R.C.C Pipe jointed with stiff mixture of cement mortar in the proportion of 1:2(1cement: 2 coarse sand) including testing of joints etc, 250mm UP PWD SOR-2020/DAR-18/ NP2 pipe
Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 8:4:1 including supply of all material labour tools and plants etc required for proper completion of the work
M-150 brick work in 1:6 cement & fine sand 1.25f.M mortar in foundation and plinth including supply of all materials labour complection of the work compiation of work (1:4:8)
Cement Concrete with 4cm gauge approved stone ballast corse sand and cement in the propertion of 4:2:1 including supply of all material labour tools and plants etc required for proper completion of the work. Same as above item no.279 but with 2cm gauge stone grit in stend of 4cm gauge stone lallast. UP PWD SOR-2020/DAR-18/279a
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DAR/10.25.2/Based on UPPWD/SOR-2020))
Supplying and stacking at site 53mm to 22.4mm siza stone aggregate
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately).
12mm Cement Plaster of mix 1:6 (1 cement : 6 coarse sand)
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 1.36 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.77 MB
7.pdf
Tender Documents • 1.25 MB
BOQ_2040451.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .