SPL REPAIR TO TOILET BLOCK (SET OF SIX) BLDG NO. OWT-147 OF MH, PROVN OF TOILET BLOCK NEAR TCP NO. 4 AND PROVN OF STORE ROOM NEAR BLDG NO. OWT-369 AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

SCHEDULE "A" PART - I [B/R WORKS]

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Work, Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. including Serviceable Bricks keep in Safe custody for Re-use at Site, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/ Worn out Wire Cloth/Netting of any descrip-tion, fixed with Beads, etc., complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness, Seggregating Serviceable Steel Sheeting and keep in Safe Custody for Refixing, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, Segregating the Serviceable Pipes and Connections, Stacking properly at Site(s) and Keep in Safe Custody for Re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, Segregating the Serviceable Pipes and Connections, Stacking properly at Site(s) and Keep in Safe Custody for Re-use, complete all as specified and as directed.

Dismantling/ Lowering down Unserviceable Water Storage Tank exc. 500 Litre but not exc. 1000 Litre Capacity of any description after disconnecting of Water Supply Connections including Float Valve, complete all as specified and as directed.

Taking up or down PVC (SWR) Soil, Waste and Ventilating Pipe 75/110mm bore (dia) with Fittings of any description from any Situations, complete all as specified and as directed.

Surface Excavation not exc. 30 Cm and averaging 15 Cm deep, getting out in Soft/ Loose Soil, complete all as specified and as directed.

Surface Dressing not exc. 15 Cm in deep, getting out in Soft/ Loose Soil including Removing Grass, Vegetation, Saplings, Shrubs, Brush-wood, Undergrowth and Roots, Rubbish, Soil, etc., complete all as specified and as directed.

Excavation in Over Areas not exc. 1.50 Metre in Depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.

Excavation in Over Areas exc. 1.50 Metre and not exc. 3.00 Metre in Depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre Wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.

Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25 Cm, Watering and Removing Surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Labour for Spreading and Levelling of soil otained from Excavation in layer n.exc. 25 cm thick including Well Ramming and watering as reuired complete all as specified and as directed.

Removing Excavated Materials (Soils), exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Sand (as approved) Filling under Floors, Foundations, etc. including Spreading and Levelling, etc., complete all as specified and as directed.

M&L Loose filling with Broken Bricks of Gauge 40mm to 80mm in Soakage Pits, Soakage Wells, complete all as specified and as directed.

M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, Deposited, Spread and Levelled in Layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded aggregates) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:4:8 (40mm graded aggregates) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Raft, Footing, Foundation Beam for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete (20mm graded stone aggregate) Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides Pillars, Posts, Struts, Piers, Columns and Stanchions and Similar Work; Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished Surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), N. Exc. 10 Cm in width and setting in Cement Mortar 1:4, complete all as specified and as directed.

M&L Machine Made Autoclaved aerated concrete (AAC) Block Masonry with Blocks 600mmX200mmX100-300mm in Sizes, having Compressive Strength as specified in IS-2185 Part 3, Exc. 10 Cm in width and setting in Cement Mortar 1:4, complete all as specified and as directed.

M&L Machine Made Autoclaved aerated concrete (AAC) Block Masonry with Blocks 600mmX200mmX100-300mm in Sizes, having Compressive Strength as specified in IS-2185 Part 3, N. Exc. 10 Cm in width and setting in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed.

S&F Flush Shutter 35mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open Rebated and Prepared to receive Glass, Gauze, etc., Divided into Squares, with Plain, Chamfered or Rounded, Mitred and Rebated Sash Bars any Numbers,with Edges of Sash Bars and Framing Moulded fitted with cut and mitred Beads for securing Glass, Gauze, etc.; Sizes of Members of Shutters as specified in SSR Part-I, Section 8 Clause 8.4(b) and fitted to Chowkat, complete all as specified and as directed.

S&F MDF Board, Exterior grade, 25mm Thick, Both side decorative choice laminations, fixed at top of workstation with stainless steel screw, L clips, glue including 1mm thick PVC edge Binding all around the edge of workstation of suitable width complete all as specified and as directed.

S&F MDF Board, Exterior grade, 18/19mm Thick, Both side decorative choice laminations, as n workstation, cupboards, mobile pedestals (Drawer) fixed with stainless steel screw, L clips, sliding runners, necessary fastners and accessory including 1mm thick PVC edge Binding on all exposed edges of suitable width complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Sliding 3 Track Window, 3 Shutter Series B (SHUTTER SECTION - 18mm) with Two Glazed Shutters and One Gauzed Each Covering Half Opening including Self Closing Locking Arrangement, Stoppers and Rubber Beading Gasket Without Sash Bars, Auminum Section Weighing 1.06 KG/RM including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Powder Coated Aluminum Beading, Screws, etc. including Anodised Aluminium Fittings in Each Shutter and fixed with 'C' Channel, complete all as specified and as directed. NOTE : Cost of Builders Hardware as mentioned are deemed to be included in the Quoted Unit Rate. However, Glazing and Wire Mesh will be Measured & Paid separately against respective Items.

S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick Plain colour PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain Color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/ sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement and fixing in the Frame with Butt Hinges as per Site as per Specifica-tion and Drawing of MES Schedule, complete all as specified and as directed. NOTE : Builders Hardware will be Measured & Paid seperately under appropriate Items.

S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed.

S&F Aluminium anodised Handle of Size 150mm, Cast type, complete all as specified and as directed.

S&F Stainless Steel Handle of Size 75mm, Bow shaped, complete all as specified and as directed.

S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n. exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Mild Steel in Compound Girders and Stanchions, Lattice Girders, Aerial Masts, Staging for Water Tanks and the like including Caps, Bases, Splices, etc., built up from Two or more Beam or Channel Sections or Angles with Plates including all Lattice Bars, Stiffeners, Gusset Plates, etc, conform to Fe-410-W (Gde E-250), Quality 'A', complete all as specified and as directed.

M&L Plates (Plain or Chequered) Channels, Square cut or Notched (Ordinary and Counter Sunk) forming Holes, without any Aattachment, conform to Gde Fe-410-W (Gde E-250) Quality 'A', complete all as specified and as directed.

M&L Mild Steel Tubular Trusses including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.

S&F Factory made Steel Ventilator with Top Hung Shutters including Hinges, Steel Peg , Stay complete all as specified and as directed. Note:-The rates include for painting with one shop coat of zinc chromate primer.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Aluminum Anodised Snap Grid/ Frame Work of Size 605x605mm in Ceiling, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed.

S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 595x595x4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Glazed Ceramic White Tiles 300x450x7.0mm thick (1st quality as approved) conforming to IS:13753 in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Vitirified Tiles 10mm thick (Square/Rectangular) light shed (as approved), Polished, Area of Each Tile not exc. 0.36 Square Metre in Floors, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platform and like in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with Admixture of Pigment to match with Shade of Granite, fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc, Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.

M&L Bitumastic Filling comprising 1 Part of Bitumen of Grade 85/25 and 2 Parts of Sand by Weight, complete all as specified and as directed.

M&L Machine Pressed Pre-cast Concrete Coloured Interlocking Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean Dry Sand as in Floors, complete all as specified and as directed. NOTE : Clean Dry Sand will be Measured & Paid separately under appropriate Item.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 20mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even without using Extra Cement including mixing WPC, complete all as specified and as directed.

M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

Supply only Liquid Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening, (Priming Coat) complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, Over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any description, over 10 Cm in Width or Girth and applying One Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old trated surfaces by complete removal of exissting treatment of Asbastos Cement sheet of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

M&L Refixing Steel Tubing 15mm bore (dia) and Fittings (Old Serviceable Pipes and Fittings obtained from BOQ Item No. 1.008 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes and Fittings by using Wire Brush including Provision of New GI Fittings (as required/ ordered at Sites), complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

M&L Refixing Steel Tubing 20mm bore (dia) and Fittings (Old Serviceable Pipes and Fittings obtained from BOQ Item No. 1.009 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes and Fittings by using Wire Brush including Provision of New GI Fittings (as required/ ordered at Sites), complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Valve 15mm bore (dia), Cast Copper alloy, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Angle Cock 15mm bore (dia), Cast Copper alloy, screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, Providing Water Supply Connections with GI Tank Nipple and Union (02 No. Each), complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, Providing Water Supply Connections with GI Tank Nipple and Union (02 No. Each), complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Gram, high pressure with Epoxy Coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) ‘P’ or ‘S’ Trap, Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/Distrubed Surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/Distrubed Surfaces, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting, Pinning in Ends and Making Good to Distrubed Surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting, Pinning in Ends and Making Good to Distrubed Surfaces, complete all as specified and as directed.

S&F Hand Shower (Health Faucet) with Inner Flexible Tube not less than 1.00 Metre in Length and Wall Hook, complete all as specified and as directed.

S&F Brass Chromium Plated Toitet Paper Holder of approved Size with Flap and Brass Chromoum Plated Rod to hold Paper Roll, fixed to Walls with Brass Chromium plated Screws, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin of Size 450x300mm, with Pedastal, Flat Back including Brass Chromium plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, Chain, Plug & Porocelain Stopper, complete all as specified and as directed.

S&F Brass Chromium Plated Waste Fitting 32mm bore (dia) for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm bore (dia) of length not less than 900mm (as approved), suitable for Wash Hand Basin, Urinal, Sinks, etc., complete all as specified and as directed.

S&F Vitreous China White Urinal, Half Stall type with Brass Chromium plated Waste Coupling 32mm bore (dia), (excluding Flushing Cistern, Flush Pipe and Waste Pipe), complete including Providing and fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe), complete all as specified and as directed.

S&F Double bowl Sink, made of 1mm thick Stainless steel for kitchen or laboratory with plug washers & bedding in cement mortar (1:3) on the dwarf all including fixing cantilever brackets and connecting union to pipe oever all size 1160mmX500mm and bowl size 530mmX400mmX200mm, complete all as specified and as directed.

S&F Sink Mixer with swinging spout, 15mm bore (dia), Brass Chromium Plated, suitable for mixing Hot & Cold Water, screwed down for Iron Pipe or for Unions, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc., complete all as specified and as directed.

S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and including Brass Chromium plated Screws and Wooden/ Plastic Cleats, complete all as specified and as directed.

S&F Soap Dish not less than 125mm in Size (as approved) Chromium Plated and fixing to Walls with Screws and, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 75mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement, complete all as specified and as directed.

SUB TOTAL OF SCHEDULE "A" Part - I

SCHEDULE "A" PART - II [E/M SERVICES/WORKS]

M&L Taking down carefully Copper/Aluminium Point Wiring (Light/Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any description), etc., Making Good Disturbed Surfaces of Walls/Ceillings, etc. in Cement Mortar 1:3 including Providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including Providing Surface Treatment (White/ Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down Unserviceable Service Connection Cable and Connected Items of any description and from any Situations, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheath-ed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. NOTE : Cost of PVC Conduit with all Fitting/ Fixtures, Modular Plates, etc. for mounting Switches, Sockets, Fan Regulators, etc. as required at Site of Work will deemed to be inclussive of Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relavent Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6 AMP, 3/5 PIN SOCKET OUTLET on INDEPENDENT BOARD, complete all as specified and as directed. NOTE:- Cost of PVC Conduit with all Fitting/ Fixtures, Modular Plates, etc. for mounting Switches, Sockets, Fan Regulators, etc. as required at Site of Work will deemed to be inclussive of Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relavent Item.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in Surface/ Concealed PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 16 AMP, 6 PIN SOCKET OUTLET on INDEPENDENT BOARD, complete all as specified and as directed. NOTE :- Cost of PVC Conduit with all Fitting/ Fixtures, Modular Plates, etc. for mounting Switches, Sockets, Fan Regulators, etc. as required at Site of Work will deemed to be inclussive of Quoted Unit Rate. However, Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces will be Measured and Paid under relavent Item.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire for ONE 6 AMP 5 PIN SOCKET OUTLET POINT on SAME BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Conduit will deemed to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc. as ordered will deemed to be included in the Quoted Unit Rate. (c) Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces shall be Measured and Paid under relavent Item.

M&L Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour), complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cables & 1-Run of PVC Casing Capping will deemed to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire for Looping (as ordered/required), etc. will deemed to be included in the Quoted Unit Rate.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Conduit will deemed to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc. as ordered will deemed to be included in the Quoted Unit Rate. (c) Cutting into Chases to Walls required for concealing PVC Conduit and Making Good to damaged Surfaces shall be Measured and Paid under relavent Item.

M&L Cutting Chases for Concealed Conduit Wiring, Pinning in, Depth not exc. 40mm and Girth exc 5.0 Cm and not exc. 15 Cm, Making Good to Disturbed Portion/Surfaces of Walls/ Floor/ Ceiling, etc. with Cement Mortar 1:3 including Applying Two Coats of Wall Care Putty, Cutting and Rubbing Down to obtain an Even and Smooth Surface and Applying Surface Treatment (White/ Colour Washing/ Distempering/ Painting) to match the Existing Finishes, complete all as specified and as directed.

S&F Rigid Non-metallic PVC Conduit of Size 25mm (External Dia) exclusive of Boxes (Junction/ Terminal) but inclusive of all Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends and Fixing Accessories such as Couplers, Lock Nuts, Saddles, Pipe Hooks, etc, complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp, 5 Pin, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 5 Pin, Multi-plug, Flush type, 230 Volt AC, complete all as specified and as directed.

S&F Switch Socket Combination 6/16 Amp, 2 in 1 3 Pin, Multi-plug, Flush type, 230 Volt AC, complete all as specified and as directed.

S&F Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and connecting up, Fixed-in-Repair complete all as specified and as directed.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F LED Bulb 9Watt, including Taking down/ out Unserviceable Light Fitting, complete all as specified and as directed.

S&F Decorative LED Light Fitting 1x10 Watt Bulkhead Luminaires including LED Light, Driver, Holder and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable including Taking down/ out Unserviceable Light Fitting, complete all as specified and as directed.

S&F Decorative LED Light Fitting 1x10 Watt Bulkhead Luminaires including LED Light, Driver, Holder and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed.

S&F LED Light Fitting 10 Watt, 220 Volt AC, 2 Feet long, Wall mounted, Decorative Box type with Driver, Holder including LED Tube, Wall mounted and Connecting up with Flexible Copper Conductor Cable, 3 Core of suitable Size and Length from Ceiling Rose to Light Fitting, complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 220 Volt AC, Wall mounted, Decorative Box type with Driver, Holder including LED Tube, Wall mounted and Connecting up with Flexible Copper Conductor Cable, 3 Core of suitable Size and Length from Ceiling Rose to Light Fitting including Taking down Unserviceable Light Fitting (2 Nos Only), complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 220 Volt AC, Wall mounted, Decorative Box type with Driver, Holder including LED Tube, Wall mounted and Connecting up with Flexible Copper Conductor Cable, 3 Core of suitable Size and Length from Ceiling Rose to Light Fitting, complete all as specified and as directed.

S&F LED Luminaire 600x600mm 35/36 Watt, (3000K to 6000K), 220 Volt AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light complete with Driver, Holders and LED Lamp suitable for Roof Ceiling and Connecting up with suitable Length and Size 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed.

S&F Exhaust Fan 300mm Sweep, Metal/ Steel Body, complete with Louvers Shutter, 1200 RPM, Single Phase, 230 Volt AC, 50 Hz, Copper Winding with Fixing Arrangement using Fastener, Connecting up with and including suitable Size and Length 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed.

S&F Exhaust Fan 250mm Sweep, made of Sturdy engineering plastic complete with Louvers Shutter, 1200 RPM, Single Phase, 230 Volt AC, 50 Hz, Copper Winding with Fixing Arrange-ment using Fastener, Connecting up with and including suitable Size and Length 3 Core Twisted Flexible Copper Conductor Cable, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up incluing Taking down/out Old Unserviceable MCB of any description, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F MCB 32Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting upincluing Taking down/out Old Unserviceable MCB (01 Nos Only) of any description, complete all as specified and as directed.

S&F MCB 32Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting upincluing Taking down/out Old Unserviceable MCB (01 Nos Only) of any description, complete all as specified and as directed.

S&F MCB 63Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting upincluing Taking down/out Old Unserviceable MCB of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 4-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 4-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion,including Taking down/out Old Unserviceable Earthing of any description complete all as per specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed.

S&F Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade Heavy duty Cable with PVC insulated Aluminium Stranded Conductor served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed 10 Sqmm Nominal Cross Section, 2 Core in Service Connection complete all as specified and as directed.

S&F Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade Heavy duty Cable with PVC insulated Aluminium Stranded Conductor served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed 16 Sqmm Nominal Cross Section, 2 Core in Service Connection, complete all as specified and as directed.

M&L Sand Cushioning (Dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying Sub-class ‘B’ Bricks of Size 230x115x75 mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and/or Laying of UG Cables, Water Pipes Lines, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the UG Cables, Water Pipes Lines, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

M&L Cutting Cast Iron/ GI Pipes of any Size and bore (dia) and reducing to required Length before Laying and to existing Pipe Lines for Taking up for Branch Connections and Insertion of Specials (as per Site requirement), complete all as specified and as directed. NOTE : Cost of Specials will deemed to be included in the Quoted Unit Rate.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 25mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 32mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm Outer dia, Brass insert with Wheel Head, screwed both Ends, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 32mm Outer dia, Brass insert with Wheel Head, screwed both Ends, complete all as specified and as directed.

SUB TOTAL OF SCHEDULE "A" Part - II

SHRI MANOJ KONWAR

KULA PRASAD GOHAlN

M/S Abhi Traders

boruah construction

M/S A K ENTERPRISE

M/S CHANDAN ENTERPRISE