SPL REPAIR TO BLDG NO P 9S COOK HOUSE AT HQ MUPSA AND PROVN OF RAIN WATER SHED, PATH AND MODULAR KITCHEN IN BLDG NO 10 JOGGERS PARK UNDER GE EAST LUCKNOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Virified Ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 and taking down cement plaster /terrazo dado/wall tiling and skirting. etc on brick or stone walls etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc complete all as specified and as directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and as directed.

M&L for mirror polished machine cut kota stone slab as in flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for wax polished machine cut kota stone slab as on skirting / dado 10-12 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed.

Ditto all as per item 10 above but 15 mm thick on other than fare faces of brick work in CM 1:6 complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and as directed.

Dismantling textile covering incl frames (if any) and cover fillets (measured flat and not girthed) complete all as specified and as directed.

S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sectin (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 3mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed.

M&L 4 mm thick non asbestos fibre cement building boards (E- Board) pre-painted designer fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.

M&L preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and as directed.

Ditto- as per item No 16 above but three coat white wash on ceiling complete all as specified and as directed.

Ditto- as per item No 16 above but two coat of cement base paint on wall complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is included)

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for cutting chases n. exc 10 cm girth in brick wall and making good in cement mortar 1:3 for embedding of AC sheet in wall complete all as specified and as directed.

M & L for PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks/roof gola etc etc complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm and over in section, in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed.

S & F second class hard wood (sal) in timber scantling clean sawn as in unframed work complete all as specified and as directed.

M & L preparing surface of wood and wood based material, new or old of any description and girth not otherwise described and treated with two coat of creosote oil complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Description same as per item No 27 above but exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed.

S&F IInd class hard wood plain, soild chowkhats and frames wrought,framed rebated on the solid rounded or chamfered put together with glue pined at jints complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side. complete all as specified and as directed.

S&F 35 mm thick second class hard wood locally fabricated glazd and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with palin chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed.

S&F 30 mm thick IInd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified and as directed. in SSR Part-I 1991 section 8 clause 8.20 (b)

S&F mild steel work as in framed work as in grill with ends of bars shouldered and riveted or fixed in spike framed guard bars confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

S&F IInd class hard wood small fittings such as brackets of any type latch and hinge blocks shaped door and windows stops and the like including all labours articles n.exc 200 cucm each complete all as specified and as directed.

S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed 100 mm long.

-Ditto- as above item but 200 mm long complete all as specified and as directed.

S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size complete all as specified and as directed.

-Ditto- but 100 mm size . complete all as specified and as directed.

S&F butt hinges, ISI market medium weilght cold rolled mild steel and fixed complete all as specified and as directed. 100 mm size.

-Ditto as above item but 75 mm size. complete all as specified and as directed.

S&F stainless steel wire clothes 0.56 mm nominal dia of wire and average width of operturel 1.18 mm complete fixed stables complete all as specified and as directed.

S&F sheet glass 3 mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as direcetd at site.

S&F mild steel work as in hold fast made out of flat iron 25mm x5 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.

M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing steel surfaces over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F Anodised aluminium frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified and as directed.

M & L for 4.8 mm thick sheet glass, ordinary quality in squares exc. 0.5 Sqm in each pane complete all as specified and as directed.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge.

M&L for plain cement concrete 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position complete all as specified and as directed.

M & L for 20 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces on other than fair face surface , surface finished even and smooth without using extra cement using waterproofing compound fair and complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for application of high performance hybrid polyurea elastomeric water proofing coating cold applied, liquid membrane at 1.5 kg/Sqm with an elongation minimum of 500+100% by airless spray machine and tensile strength of minimum 11-13 N /mm2 as per ASTM D2370,crack bridging ability minimum of 3 to 4 mm as per ASTM C1305 ,Shore Hardness of minimum 70+5 as per ASTM D2240 complete as per directed by Engr-In-Charge. The System shall also include final base preparation including cleaning of the plaster surface etc and applying epoxy primer as approved makes in one coats at a coverage of 0.20 kg/Sqm, etc as per manufacturer specification, complete all as specified. Note:-(a) The work pertaining to water proofing treatment shall be executed for authorized applicator through manufacture of wich the materials is proposed to be used by the contractor and approved by Garrison Engineer.(b) The contractor shall upload along with the documents under technical bid (cover-1) 'Memorandum of understanding '(MOU) with Only one manufacturer mentioned in the contract,falling which the bid shall be liable to be rejected." Note: (1)- Work shall be executed by OEM under the provision of MOU. (2)- MOU shall be uploaded with cover -I (T bid) as per format attach with tender documents.

Taking up or down GI tubing 15 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm. complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and as directed.

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and as directed.

M&L for making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 10 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and as directed.

S&F 500 ltrs three layer in white colour capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks and removing to store complete all as specified and as directed.

S& F in repairs white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover. complete all as specified and as directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and as directed.

S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified and as directed.

All as per above item No 2 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 and taking down cement plaster /terrazo dado/wall tiling and skirting. etc on brick or stone walls etc complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. complete all as specified and as directed.

S & F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make

S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and as directed.

S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc complete all as specified and as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and as directed.

M&L old kota stone floor treating the surface with bee wax polish complete all as specified and directed by Engr-in-Charge.

M & L for Providing and applying Sika Monotop 122F or equivalent ready to use single component fibre reinforcement high strength polymer modified cementitious repair mortar in 25 mm thickness water/powder ratio shall be as speficied by manufacturer so as to achive the following parameters ;- 28 days Compressive strength >=5N/mm2 Flexural strength at 28 days >=5/mm2 Note :- Work to be executed by the authorised applicator of manufacturer only. complete all as specified and as directed.

Taking down door and window easing and repair (handle, peg set, tower bolt, glass and smoth closing and opening) and refixing in same opening complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint, complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD), complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified and as directed.

S & F in repairs cast iron floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and as directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and as directed.

S & F in repair vitreous China bowl type urinal flat back size of 465 X 355 X 265 mm white with grating and union for discharge pipe complete with and providing and fixing plugs , bedding against wall in Cm 1:2 , securing urinals to plugs with and including 60 mm long brass screws fixing with brackets, flush pipe etc. complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate in filling foundation and mass concrete, complete all as specified and directed.

Surface excavation n.exe 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L Hard core of Broken bricks of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness complete all as specified and as directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8, as in sub base to floor, complete all as specified and as directed.

M & F for chequered cement concrete tiles 30cm x 30cm x 20mm thick, set jointed and pointed in neat cement slurry, with grey cement and pigments, laid over 15 mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F 1.5 mm thick powder coated aluminium partiton wall, partly panelled and partly glazed, size of aluminium section 44x44x1.5 mm th divided in square or rectangular (n exc 1.2 sqm each panel), top panel shall be glazed with 5.50 mm thick sheet glass any shade or tint and bottom panel shall be made of 5 mm thick ACP sheet of any shade or colour as directed by Engr-in-Charge including necessary cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, with required EPDM rubber/ neoprene gasket complete all as specified and as directed.

S&F in cabinet shutter with frame including shelves,drawer made of solid WPC block board 18/19mm thick of density not less than 600 kg/cum both sides decorative face having smooth outlet integral skin are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of WPC 18/19mm solid board profile complete all as specified by manufacturer instruction complete all as specified and as directed.

S&F 100 mm long, fancy type, stainless steel handles, complete all as specified and directed.

S&F magnet catcher for cup board shutter complete all as specified and as directed.

S&F stainless steel cutlary basket/ wire basket for cup and saucer, plates, bottles, having size 18"x20" and depth as required, complete all as specified and as directed.

S&F MS sliders of size 21" for facilatate to drawer slide on steel ball bearing ,fixed with screw/nut and bolts complete all as specified and as directed.

S & F auto concealed hinges, hydraulic type, SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F of Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle of Fe 410-w (Gde E 250) quality A complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including DBs,submain,cables etc complete all as specified and as directed. by Engineer-in-charge.

Taking down carefully Ceiling fan/wall fan/Exhaust fan/Geysers complete and refixing after 2 coat of spray painting with enamel paint complete all as specified and as directed. by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) complete all as specified and as directed. by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP acomplete all as specified and as directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 113 hereinbefore but for One 5 A socket outlet on independent Board complete all as specified and as directed.

All as per Item No 113 hereinbefore but for One 5 A socket outlet on same Board complete all as specified and as directed.

All as per Item No 113 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor complete all as specified and as directed.

Supply and fix frame plate with match cover twelve module complete all as specified and as directed.

Supply and fix frame plate with match cover eight module complete all as specified and as directed.

Supply and fix frame plate with match cover six module complete all as specified and as directed.

Supply and fix frame plate with match cover four module complete all as specified and as directed.

All as per item No.120 above but three module complete all as specified and as directed.

Supply and fix terminal box suitable twelve modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix terminal box suitable eight modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix terminal box suitable six modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix terminal box suitable four modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

All as item No 125 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and as directed.

Supply and fix TV Socket 1 Module Modular complete all as specified and as directed. by Eng-in-Charge

Supply and fix Telephone socket 1 Module Modularcomplete all as specified and as directed. by Eng-in-Charge.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and as directed..

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and as directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two modulecomplete all as specified and as directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and as directed.

M&L in factory made distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs as outgoing complete all as specified and directed conforming to IS: 8623 along end box for above DB complete all as specified & directed

M&L in factory made distribution board 4 way TPN DB Double door with metal double door (IP-43 protection) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and 12 SP MCBs outgoing complete all as specified and conforming to IS :8623 along with cable end box for above DB complete all as specified & directed.

M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified & directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning 40 to 63 Amp capacity complete all as specified and as directed.

M&L for replacement TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module complete all as specified and as directed.

S&F modular bell push single pole 1 module 6 Amp, 240 volt complete all as specified and as directed..

S&f call bell , ding dong / musical AC single phase 230 volts complete all as specified and as directed.

S&F Ceiling rose PVC polycarbonate complete all as specified and as directed.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and The driver should be complied with Fixed output/DALI/POE version and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. complete all as specified and as directed. by engineer in charge.

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 complete all as specified and as directed. by engineer in charge.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and as directed.

Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and as directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings complete all as specified and as directed.

S&F of electric chimney commercial type three phase 415 volts inclufing push control, baffle filter, metal blower, min suction power 1250 cum/Hr, black powder coated with min size L-90 cm and all accessories including aluminium hose pipe 4/6 inch 8 mtr complete including cutting of holes wherever required and matching with the existing surface after fixing of chimney complete all as specified and directed. Note:- Aluminium hose pipe rate is including in the item rate and no extra payment will be done to contractor

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.

Supply and fixing of wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and as directed. by Engineer - in - charge.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB complete all as specified and as directed.

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion. complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and as directed. by the Engr-in-Charge.

M &L for Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and directed.

M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.

M &L for Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning for protection of cables complete all as specified and directed.

Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.

Supply & fix HDPE pipe DWC grade 80mm bore in trench/ wall/floor for protection of Cable including making good of the distubed surface complete all as specified and as directed.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color.complete all as specified and as directed.

Supply and fixing Exhaust fan PVC body 250 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and directed.

Supply and fixing Exhaust fan steel body 380/450 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and directed.

Supply and fixing storage water heater (Geyser) Vertical/Horrizontal type of capacity 50 ltrs, 230 volts, Anode Rod, PUF Insulation, Whirl flow Technology, Water Resistance and Splash Proof (IPX 4), Adjustable Knob Star Rating 5 Star, Dimension 53.5 cm x 52 cm x 75 cm Wattage 2000 W Pressure 8 Bar Rated Voltage 230 V AC Rated Input Current 8.7 A Warranty Summary 7 Year Warranty On Inner Container ; 4 Year Warranty On Heating Element ; 2 Year Comprehensive Warranty Mixing Ratio 0.3 Accessories 1 N storage electric water heater , 1 N user manual , 1 N multi-function safety valve, 2 N fasteners & 2 N flexi pipes Reheat 104 min including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge.

M/S KAUSHIK CONSTRUCTION (BID ID -3288274)