WOT-CIVIL-11-2025-2026

Earth work excavation in hard gravelly soil. Stiff black cotton soil, hard red earth, shales, Murram, gravel, stoney earth mixed with small sized boulders etc., complete as per standard specification.

Earth work excavation and depositing on bank with initial lead of 10m and initial llift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

Earth work excavation and depositing on bank with initial lead of 10m and initial llift of 2.0m in medium rock,or dence medium rock not requiring blasting, as per standard specification, etc., complete.

Earth work excavation for foundation in hard rock wedging & chiseling and trimming to proper shape where blasting is prohibited including all lead of10m and lift of 2m, as per standard specification. etc., complete..

Supplying and filling in M. sand for foundation and basement including cost of sand, filling charges as per standard specification (watering & consolidation) with all leads and lifts as per standard specification, etc., complete.

Plain cement concrete 1:3:6 using 20 mm HBGS jelly, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Plain Cement Concrete 1:2:4 using 20 mm HBGS jelly for Plinth including dewatering wherever necessary well rammed, consolidated and curing etc. complete complying with standard specification

RCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with out form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

Providing form work for plinth for above ground level including cost of all materials, labour charges leads, lifts, as per standard specification etc., complete.

Brick work in C.M. 1:5, using class II chamber burnt bricks for super structure including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete (Non Building)

RCC 1:1.5:3 using 12 to 20mm HBG metal for RCC Slab for Cable Duct & Steps including cost of cement, all materials, Centering, Shuttering. labour curing, vibration, including cost of all leads, lifts as per standard specification

Labour charge for fixing template in correct level and alignment etc complete

Supplying and fabrication of grouting bolt including cost thread all materials lead lift etc complete - 25 mm dia bolt and nut

Supplying and fabrication of grouting bolt including cost thread all materials lead lift etc complete - For 20 mm dia bolt and nut

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete

Supply and fixing labour charges for cutting GI/MS angles to required length and fixing and keeping in cable duct.

Labour charge for transporting of all types of cable duct cover slab to working site from curing tank, keeping in in position with proper alignment including labour, lead, lift, etc., complete.

Supplying and spreading 100 mm tk of 20 mm metal over crusher dust of 100 mm thick, including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification

Plastering with CM 1:5, 12mm thick, including cost of cement, labour, curing, all leads and lifts etc., complete. as per standard specification

Colour washing two coats with cement paint of approved quality over a coat of white cement for exterior surfaces including thorough scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.

Providing and laying 150 mm dia PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.

Providing and laying 25 mm dia PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.

Providing and laying 32mm dia PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.

Supplying and fixing 25 mm dia GM gate valve ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete., as per standard specification.

Supplying and fixing 32 mm dia GM gate valve ISI make of approved quality including cost of all materials, labour, lead, lift, etc., complete., as per standard specification.

Providing fixing 12mm screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, etc., complete, as per standard specification.

Supplying and fixing RCC color 0.60m dia 0.3mx 0.05m including cost of all materials, labour, lead, lift, etc., complete.,

Supply of MS RSJ 200*100mm as per IS 2062 and latest issued of IS.

Supply of MS Channel 100x50mm as per IS 2062 and latest issued of IS.

Supply of MS angle 100x100x8mm as per IS 2062 and latest issued of IS.

Supply of MS angle 50x50x6mm as per IS 2062 and latest issued of IS.

Supply of MS flat 65x10mm as per IS 2062 and latest issued of IS.

Supply of MS flat 50x8mm as per IS 2062 and latest issued of IS.

Supply of Ms flat 25x3 mm as per IS 2062 and latest issued of IS.

Transporting of Iron and Steel items from Coimbatore and Karamadai to 110/11 KV Perumanallure AIS 60KM.

Labour charges for Loading/Unloading/Shifting Iron & steel materials by manual or crane at Store, AIS site, and fabrication site etc.,

Labour charges for fabrication of Heavy Section without lengthwise welded joints(Sectional weight 14kg/m and above) The electricity will be borne by the Department.

Labour charges for fabrication of Light Section with welded joints(Sectional weight beloe 14kg/m and above) The electricity will be borne by the Department.

Labour charges for erection of Heavy Sections(Sectional weight 14kg/m and above) including alignment and minor transporting etc.,Under LC.

Labour charges for erection of Light Sections(Sectional weight below 14kg/m ) including alignment and minor transporting etc., Under LC.

Labour machineries,consumables for erection of earth mat & earth raisers(Electricity supply will be brone by department).

Labour machineries, consumable for earth raisers for equipment's and structurs.( Electricity will be brone by department ).

Labour for erection of CT/PT/Light box junction box including fabrication of clamping arrangements.

Labour for erection of 33/22/11 KV CT, PT, NCT, Reactor, auto recloser using manual labour (one S.Ph or 3 Ph. Unit) Under LC.

Labour for erection using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tackles etc… as per standred 33 KV VCB Under LC.

Labour for erection of Isolator / AB switches without earth hand operated 33 or 22 or 11 KV Under LC .

Erection of strung bus Labour for strining of strung bus including hosting of insulator, erection of eye bplts and hardware fittings etc 33 KV Single Zebra Conductor (1 span 3 run) Under LC.

Labour for providing Droppers and jumpers up to height of 6 mtr to 10 mtr under LC.

Labour for providing Droppers and jumpers up to height of 6 mtr.

Labour for erection of bus bar without bends using 50mm IPS Aluminum tube under LC.

Supply, Fabrication and fixing of bell mouth ,insertion of Jumper in the solid core/ PT Isulators and other consumables & as directed by the field Engineer (Electricity supply will be brone by department).

Supply and provision of M8,M9,M10,M12 & M16 Half/full thread GI bolt, Nuts & GI washer of various size for erection of Structures/insulator or any other purpose wherever required and as directed by the field Engineer.

Labour for laying of cable in duct/ trunch including the cost of aluminum tag for identification Above 8 core.

Labour for laying of cable in duct/ trunch including the cost of aluminum tag for identification Upto 8 core.

Labour for laying of cable in structure Upto 8 core.

Supply of ISI mark cable glands - 19/22 mm.

Supply of ISI mark cable glands - 25 mm.

Supply of ISI mark cable glands - 28 mm.

Erection of cable glands - 19/12 mm.

Erection of cable glands - 25 mm.

Erection of cable glands - 28 mm.

Supply of lugs,ferrules, sleeves,cable tie insulation tape and other accessories for providing cable core end termination.

Labour charges for cable core termination.

Supply of mounting channel suitable for CBTM 5 terminal block in panel / box as required and as directed by the field engineer.

supply of fabricated CT/PT junction boxes of size 400x300x150 out of 14 swg MS sheet wherever required as directed by the field engieer including cost of locking arrangements cost of all materials labour etc complete.

Supply of Red oxide paint.

Supply of Aluminium paint.

Supply of Eanmel paint.

Painting of structures after proper surface preparation using appropriate machinery to remove rust / scales etc., one coat of enamel painting / primary coat on iron & steel.

One Primary coat of Red oxid painting of various structures after proper surface preparation using appropraite machinery to remove rust/scales etc.

Labour Charges for Two Coats of Aluminium Painting of fabricated strutures after proper surface preparation using appropriate mahinery to remove rust and scales including supply of paint,brush and consumables etc.,

Supply of disconnected type terminal block suitable for CT circuits in panel / box as required and directed by the field Engineer.

Fixing of disconnected type terminal block suitable for CT circuits in panel / box as required and directed by the field Engineer.

Labour for dismantling of yard light pole.

supply of the Tension Fitting 4 Bolted for Zebra asper the latest IS code.

supply of the Switch end Clamp Zebra as per the latest IS code.

supply of the Switch end Clamp for 2" Busbar as per the latest IS code.

supply of the Switch end Clamp for mink asper the latest Iscode.

supply of the T clamp for Zebra asper the latest IS code.

supply of the T Clamp for 2" Bus to Zebra asper latest IS code.

supply of the 2" Free end clamp asper latest IS code.

supply of the 2" Carona bell asper latest IS code.

supply of the 2" Seating black asper latest IS code.

supply of the 2" Reducer clamp asper latest IS code.

Labour for erection of single / double pole stack up right, under hang or suspension. with provision of hardwares,etc.33/22/11 KV.

Labour for erection of simplex indoor/outdoor panel/battery charger including supply & fabrication of MS flat 65*10mm for mounting arrangements and earthing of panel including hardwares.

Labour for excavations and refilling of avg depth of 0.8 Mtrs for earth mat.

Providing earth pit of 115 mm dia to a depth of 6 mtrs. labour for fabrication of earth electrode using M.S.rod 40 mm dia & insert electrode in to the bore and refilling with red soil and bentonite powder of 30 Kg and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod to be fixed in the board and aluminium paint should be painted top of the earth rod & its holding portion as directed by the field Engineer as per DRG No: TR/GCC/CBE/230-110-33-22-11-EP/044.

Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. including cost of materials for earth electrode using M.S.rod 40 mm dia , red soil and bentonite powder of 30 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG as directed by the field Engineer as per DRG No: TR/GCC/CBE/230-110-33-22-11-EP/044.