SPL REPAIR TO BLDG NO. P-1A OR SINGLE LIVING AND WAITING SHED AT STN HQ INCLUDING CERTAIN REVENUE AND MINOR WORKS UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed

S&F 1.25 mm thick pressed steel frames for doors of size 125X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed

S&F second class hardwood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, shutters as specified in SSR Part -I, Section 8, clause 8.20 (a) complete all as specified and directed

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, ( double or single shutter) complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) as in filling in door frame/Chowkhat etc, complete all as specified and directed.

S&F mild steel work as in hold fasts, plain angle cleats for securing purlins ,and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in filling of hold fast , kneelers, apex stones, bed plates etc, complete all as specified and directed.

S&F partly glazed 5.0 mm thick tinded glass and partly prelaminated board panel min 12 mm thick, aluminum door powder coated consisting of frame of 83 mm x 44 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with 125mm long aluminium handle 'D' type in each door, 100mm long ISI marked stainless steel hinges 03 Nos in each shutter has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, 1 No. of aluminium tower bolt 200 long ISI marked,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (Al. section thickness 2.00 mm } ) confirming to IS complete all as specified and directed

S&F Aluminium window with and including aluminium powder coated frame of aluminium section 64x38x1.83 mm thick with shutters double shutter having styles of aluminium section 83x44x2 mm thick and rail of aluminium section 83x44x2 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as 100mm long ISI marked stainless steel hinges, aluminium tower bolts 150mm long ISI marked, handles etc including providing and fixing 4.8mm thick tinted glass in two shutters and fixed stainless wire gauge 0.36 mm nominal dia of wire and average width of aparture 1.40mm with ,Including Aluminium chequred Decco grill of 50x50 mm mesh with suitale aluminum section screwed fixed and neccessary fixing arrangments complete all as specified and directed

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed (Al. section thickness 1.50 mm }

S&F in repair partly glazed (5.0 mm thick plain / tinded glass) and partly prelaminated board panel (min 12 mm thick) aluminum partition powder coated consists of frame size is 83 x 44 mm fixed with rubber gasket & aluminum beading any No of panels with incl. necessary joining cleats , glazing clips etc complete (Al. section thickness 2.00 mm } ) confirming to IS complete all as specified and directed

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F MS 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats complete all as specified and directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section complete all as specified and directed

S&F Aluminium alloy, anodised,sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F extruded aluminium alloy handles 125 mm long , fabricated type anodised, complete all as specified and directed

S&F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed

S&F in replacement GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4 mm as per manufacturer instruction as in ceiling with and incl S&F white Non Asbestos designer ceiling cement boards 4 mm thick of size 595 x 595 mm complete all as specified and directed.

Dismantling framed timber scantlings 40 sq. cm & over in section, in any position

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws including dismantling of old existing Asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet precoated coloured Profile ridge ,fixed with self driving screws including dismantling of old existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified & directed.

Cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15mm dia GI tubing and connection complete all as specified and directed .

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connection complete all as specified and directed .

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed .

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed .

S&F in repairs brass chromium plated 15 mm bore wall mixer for mixing Hot & Cold water with arrangement of head shower and with hand shower complete ,high pressure, screwed down for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for iron pipe complete all as specified and directed.

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia (Make -prayag or equvilent) complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repair 15mm bore C P bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair angular/ concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repair 75 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed..

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed..

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F wash hand basin of size 550 x 400 mm vitreous China white flat back/corner type including brackets, waste coupling & PVC waste pipe of 32 mm dia complete with and including vitreous China full size pedestal for wash hand basin complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including dismantling water tanks complete all as specified and directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to wall with & including mild steel clamps complete all as specified and directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified and directed.

S&F in repars PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete.

S&F in repairs PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed.

Demolition of roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work cement concrete (unreinforced) complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bar 6mm to 8mm dia , cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 18mm to 20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed.

M&L for rounding/ chamferring to edges of granite/Kota stone slabss one edge , such as in steps , cooking plateform,window cill and other similar situations complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement provided with construction joint 10 x 20mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile (600 mm X 600 mm) exc 0.18 sqm but not exc 0.38 Sqm as in floors set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over & including 15 mm thick screed bed in CM 1:6 including dismantling of floor tiles / terrazo including cement mortar bedding ,removal of tiles from site and rubbish off the premises complete all as specified and directed.

All as per Srl item No.64 above but in dado / skirting laid over and including 10mm thick rendering in CM 1:4 including dismantling of wall tiles / terrazo including cement mortar bedding ,removal of tiles from site and rubbish off the premises complete all as specified and directed..

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400 x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 including dismantling of floor tiles / terrazo including cement mortar bedding ,removal of tiles from site and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles of size 450x 300 x 6 to 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over 10 mm thick rendering in CM 1:4 including dismantling of wall tiles / terrazo including cement mortar bedding ,removal of tiles from site and rubbish off the premises complete all as specified and directed..

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc over and incl 25mm thick uniformly levelled surface of stone dust cushioning including dismantling of existing tiles of any type complete all as specified and directed..

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed..

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed..

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed..

M&L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggt , as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed..

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed..

M&L for rendering 15mm thick on brick work or conc surfaces in cm 1:6, finished even and smooth without using extra cement complete all as specified and directed..

M&L two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5 mm thick in CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed.. (Note:- WPC shall be measured and paid seperately under respective item).

Supply only WPC complete all as specified and directed..

M&L for preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls & complete removal of existing treatment and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent.

M&L for preparation of new wall surfaces and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-charge. Make Asian ACE or equivalent.

M&L for preparation of old surfaces of walls by complete removal of existing treatment from walls & by properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of interior emulsion over a coat of alkali resistant primer complete all asspecified.

M&L for preparation of new surfaces of walls and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of interior emulsion over a coat of alkali resistant primer complete all asspecified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..

M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed..

S&F in repair 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed..

Excavation in trenches, not exc 1.5 m wide and n.exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and exc 1.5 m but not exc 3 m deep in soft/loose soil and getting out complete all as specified and directed

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated soil exc. 50m but not exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for RCC Design mix M-25 (using 20 mm graded stone aggregates) as in column footings and plinth beams complete all as specified and directed

M&L for RCC Design mix M-25 (using 20 mm graded stone aggregates) as in columns complete all as specified and directed.

M&L for RCC Design mix M-25 (using 20 mm graded stone aggregates) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. fair finished surfaces of concrete flat complete all as specified and directed.

M&L for 25mm thick PCC type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed in CM(1:4) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM(1:4) complete all as specified and directed..

S&F vitreous China counter wash hand basin oval type, including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe complete all as specified and directed

S&F chromium plated two way bib cock with wall flange single lever screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. Make- Jaquar Cat No ; ORM-10041 or equivalent in Cera

S&F Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar or equivalent in Cera

S&F as in repairs Vitreous China Pedestal pattern EWC complete all as specified and directed (Make : Johnson P2307PW/P23008PW (P/S) Trap or equivalent in Cera)

S&F brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for 15 mm bore iron pipe complete all as specified and directed.

S&F CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed

S&F stop valves/angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed..

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed..

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls with mild steel clamps complete all as specified and directed..

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed..

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed..

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed...

S&F PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed..

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed..

S&F brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed...

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. 32 mm bore complete all as specified and directed..

S&F aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed..

M&L for cutting openings, through brick walls built in CM or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m complete all as specified and directed..

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and directed

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F aluminium anodised ventilator shutter with and including aluminium frame fixed type without sash bars, aluminium section weighing 0.55 Kg/Rm including necessary glass panes & wire mess ,cleats, glazing clips, rubber packing anodized aluminium beading, screws, etc complete all as specifed and directed

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specifed and directed.

S&F figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specifed and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specifed and directed

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,square pipe or flat sections) including distance pieces, cleats complete all as specifed and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, in hard/dense soil ,getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, including removal of excavated soil to a exc 50 mtr complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-2 using 40mm graded stone aggregates as in posts complete all as specified and directed.

M&L for mild steel rolled tubular sections as in main and cross beams, hip and jack rafters; purlins Posts where connected to common rafters and angle cleats or other connecting plates incl wind ties etc Fe410 Gde E-250) Quality A complete all as specified and directed

M&L for rolled mild steel plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, FE-410W Gde-'E 250' Quality 'A' complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet precoated coloured profile pattern fixed with self driving screws complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured for fidge or fixing for closing gable truss suitable for profile pattern fixed with self driving screws complete all as specified and directed.

S&F mild steel screw bolts (machine made) 16 to 20 mm dia and 280 cm long complete all as specified and directed by Engineer-in-charge.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB of any capacity complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC(FR) insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square TW Mica Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green for the following:-

For one light, fan point controlled by one switch

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.136 here in before but for power point wiring using with 2.5 sqmm PVC (FR)insulated , unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt complete all as specified and directed

S&F switch piano type flush, single pole, one way,15Amp 230 Volt complete all as specified and directed

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp ,flush type universal shuttered 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal complete all as specified and directed

S&F lamp holder PVC type insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb complete all as specified and directed

S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.146 above but SPN32- 63 Amps, 240 V

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size complete all as specified and directed

S&F electronic double space rotary step type 5 speed regulator 120- 280 V complete all as specified and directed

Taking down and refixing connecting of Ceiling fan after greasing complete all as directed by Engr-in-Charge.

Taking down old exisitng tube light fittings of any watts and any type complete all as directed by Engr-in-Charge.

S&F LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet or eqvt in Phillips/CG.

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make Bajaj/Wipro/CG II

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body complete all as specified and directed. Make - Havells TURBOJET/Bajaj MAXX AIR/Crompton EXHD300-6-1.

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 10 sqmm 4 core complete all as specified and directed.

S&F double door metallic sheet metal enclosure for DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate

S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles, all as specified & directed.

S&F in replacement 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 10 sqmm 2 core over all PVC sheathed in service connection suspended by insulating hangers not more than 1 Mtr apart including 4mm suspension wire complete all as specified and directed.

M&L LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness. Make Havells Cat Part N0 LUMILINEBS20WLED830SPCWH LED 6500K 4 feet or eqvt in Phillips/CG.

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/L&T/Havells

M&L for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

M K Construction

A Raza Enterprises

maharaja construction and suppliers