REPAIR TO COMPUTER TABLE CHAIR COMPUTER SOFA SETS ALL TYPES TABLES STEEL WOODEN REPAIR PAINTING TO STEEL ALMIRAH LARGE MEDIUM LOCKER BED SIDE STEEL ETC AND POLISHING ALL TYPES OF WOODEN FURNITURE AT ATS BELGAVI

Amount

M & L for Polishing to wooden furniture, all unevenness shall be rubbed down to smoothness with suitable sand paper and the surfaces shall be well dusted, the porus in the surface of the wooden parts of the furniture shall be filled with a filler made of paste of in water of mathylated spirit with a suitable pigment like burnt sienna, polishing to the prepared wooden surface with two coats of French polish of high glossy finish of the following items of furniture.

Almirah large wooden with shelf. DRG NO DB-4116

Almirah medium with shelves wooden. DRG NO DB-4116

Almirah medium 1/2 S 1/2 H shelves wooden. DRG NO DB-4116

Sofa set 4 seated. DRG NO FD-281

Table conference. DRG NO FD-8(M).

Stool dressing cushioned MAP. DRG NO FD-27(M)

Table peg. DRG NO FD-384.

Table Office Clerk wooden. DRG NO DB-4920.

Rack side four spaces wooden. DRG NO DB-4123.

Side board. DRG NO FD- 241.

Table typist wooden. DRG NO FD-4122.

Teapoy. DRG NO FD-278.

Table office officer wooden. DRG NO DB-4119.

Table 600 x 600 x 760mm. DRG NO FD-95 (M).

Table 3' x 2' without drawer. DRG NO FD-231.

Sofa set 5 seater. DRG NO FD-281.

Chair dining. DRG NO FD - 279

Chair easy. DRG NO FD-229

Chair Writing. DRG NO FD-280.

Table center. DRG NO FD-274.

Table dressing gents. DRG NO FD-379

Board notices 1830 x 1230 mm. DRG NO FD-99(M)

Sofa Chair. DRG NO FD-281, 373.

Work Table 10' x 3' x 3' with 3 drawers one side. DRG NO F-46

Work Table 10' x 3' x 3' with 3 drawers both side. DRG NO F-46

Book Case DRG NO FD-232

Book Shelf open large DRG NO FD-69

Chair dining long back. DRG NO FD-357.

Chair easy cushioned. DRG NO FD-358.

Table dining 6 persons. DRG NO FD-273.

Table dining 8 persons. DRG NO FD-273.

Table writing. DRG NO FD-275.

Bed Hard with ply wood top. DRG NO FD-246.

M & L for Polishing to wooden furniture, all unevenness shall be rubbed down to smoothness with suitable motorized grinder / sand paper and the surfaces shall be well dusted, the porus in the surface of the wooden parts of the furniture shall be filled with a filter made of paste of in water of mathylated spirit with a suitable pigment like burnt sienna, polishing to the prepared wooden surface with two coat of French polish of high glossy finish, and painting the metal parts of the furniture such as bottom frame, legs etc made out of MS square/pipe after cleaning and preparing the surfaces all as directed for the following items of furniture.

Desk in first class hard wood. DRG NO FD-107

Form without back. DRG NO F-7

Form with back 1200 mm. DRG NO F-2,F-78(M)

Form with back 1900 mm. DRG NO FD-20

M & L for dismantling the existing unserviceable wheels/ bushings assembly of the computer tables supply and fix suitable PVC bushing wheel assembly all as directed.

M & L for repairing the unserviceable chair revolving Godrej pattern by replacing the old unserviceable parts such as swivel movement bearing, hydraulic seal, spring and ball wheel set (all three) with newer one complete including greasing and servicing etc., all as directed. DRG NO: PCH 9102R, PCH 5002T, PCH-7031

M & L for repairing the unserviceable chair revolving Godrej pattern by replacing the old unserviceable parts such as swivel movement bearing, hydraulic seal, spring, ball wheel set (all five) and base frame with newer one complete including greasing and servicing etc., all as directed. DRG NO: FD-E6 MAP 01

M & L for removing the existing unserviceable seat and back from chair revolving godrej and S& F new seat and back godrej pattern all as per DRG NO: FD-E6 MAP 01 and sepcification.

M & L for removing the existing unserviceable top from table computer godrej and S& F new table top of prelaminated particle board extrier grade 18/19mm thick all as per DRG NO: FD-E6 MAP 01 and sepcification.

M & L for removing the existing unserviceable cushion of 40mm thick, 40 density and supply and fixing suitably with same high quality cushion for chair seat and back all as directed. DRG NO: PCH 9102R, PCH 5002T, PCH-7031

M & L for removing the existing unserviceable tapestry cloth from chair seat/back and supply, cut and stich into required shape/size tapestry cloth air force colour high quality of same shade into the same position complete all as directed. DRG NO: PCH 9102R, PCH 5002T, PCH-7031

M & L for removing the following old unserviceable parts of Sofa set three seaters/single seater and S&F new components of first class teak wood including polishing the replaced component all as per DRG NO FD-281 and specification :-

Leg of sofa chairs (3/1 seater) size 70 x 35mm. DRG NO FD-281

Arms rest of sofa chair (3/1 seater) size 35 x 70mm. DRG NO FD-281

Wooden rail to support back frame (3/1 seater) size 30x50mm. DRG NO FD-281

Wooden bearers for sofa set (single seater) 40x40mm. DRG NO FD-281

Wooden top rails for sofa set (three seater) size 35 x100mm. DRG NO FD-281

Wooden battens for sofa set (3/1 seater) size 50x20mm. DRG NO FD-281

S & F cushion of size 535x500x100mm of 40 density including suitable cover tapestry cloth of good quality rate not less than Rs 250 over malmal cloth on stool dressing all as specified & directed. Drg No FD-281

Removing old unserviceable table top of table 3’ x 2’, with/without drawer S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging complete all as directed. DRG NO FD-223/231 /42(M) /224

Removing old unserviceable leg of table 3’ x 2’ with/without drawer after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced leg of the table complete. DRG NO FD-223

Removing old unserviceable long rail of table 3’ x 2’ after fully dismantling and S & F new long rail of first class HW (teak wood), duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced rail of the table complete. DRG NO FD-223

All same as item No.14 above but short rail of table 3’ x 2’ and S & F new short rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced rail of the table complete. DRG NO FD-223

First class HW (Teak wood) cross brackets of size 100 x 100 x 25 mm thick long teak wood fixed with MS screws including polishing. DRG NO FD-223/224

Dismantling / removing the old unserviceable table top of table dining 8 persons type S & F 18/19 mm thick three layered flat press teak wood pre-laminated particle board exterior grade one side teak finish and other side white lamination cut into suitable size of 1200 mm x 1800 mm including 6 mm thick teak wood edging and polishing to teak wood edging all as directed. DRG NO FD-376

Removing old unserviceable leg of table dining 8 persons after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced leg of the table complete. DRG NO FD-376

Removing old unserviceable long rail of table dining 8 persons after fully dismantling and S & F new long rail of first class HW (teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced long rail of the table complete. DRG NO FD-376

Removing old unserviceable short rail of table dining 8 persons after fully dismantling and S & F new short rail of first class HW (teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced short rail of the table complete. DRG NO FD-376

Removing old unserviceable table top of table peg’ and S & F new table top of peg table made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-384

Removing old unserviceable leg of table Peg after fully dismantling ; and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the table complete. DRG NO FD-384

Removing old unserviceable side rails of table peg’ and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-384

Removing old unserviceable table top of table center and S & F new table top of table center made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-235

Removing old unserviceable leg of table centre after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the table complete. DRG NO FD-235

Removing old unserviceable side rails of table centre and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-235

Removing old unserviceable table top of table writing and S & F new table top of table writing made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-375

Removing old unserviceable top of Teapoy and S & F new top of Teapoy made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-382

Removing old unserviceable leg of Teapoy after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg complete. DRG NO FD-382

Removing old unserviceable side rails of Teapoy and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-382

Removing old unserviceable table top of table dining 3’ x 3’ & S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging & polishing complete all as directed. DRG NO FD-1009

Removing old unserviceable table top of table dining 3’ x 3’ & S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging & polishing complete all as directed. DRG NO FD-88

Removing old unserviceable leg of Table dinning after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg of table complete. DRG NO FD-88

Removing old unserviceable side rail of Table dinning after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg of table complete. DRG NO FD-88

Removing old unserviceable table top of table dining ORs and S&F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing the edging and painting the MS tube frame all as directed. DRG NO FD-165(M)

Removing old unserviceable table top of table dining 6 persons and S&F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing the edging and painting the MS tube frame all as directed. DRG NO FD-273

Removing old unserviceable table top of Table office officers steel and S&F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-1002/FD-84(M)

Removing old unserviceable table top of Table office clerks steel and S & F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-89(M) FD-1004

Removing old unserviceable table top of Table typist steel and S & F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-1005

Removing the existing unserviceable drawer of Table office officers steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-89(M)/FD-1002

Removing the existng unserviceable drawer of Table office clerks steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-1004/FD-84(M)

Removing the existng unserviceable drawer of Table typist steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-1005

Repairing the metal part of table steel any type by tinkering , welding the dismantled out portion and refixing the same by means of elelctric arc welding all as directed. DRG NO FD-FD-89(M)/ FD-84(M)/ FD-1002/ FD-1004/ FD-1005

Supply and replace hard rubber / PVC bush 32mm size to the legs of the tables all as directed. DRG NO FD-FD-89(M)/ FD-84(M)/ FD-1002/ FD-1004/ FD-1005/FD-78/107

M & L for Locking device consisting of base plate made out of 12 gauge MS sheet and Lever plate made out of 16 gauge MS sheet to the required length, 'D' shape, suitable for almirah large/medium steel including taking down of old locking device. Drg No: FD-1031, FD-1032

S & F of 8 mm dia round bar type locking device of suitable size and shape for almirah large steel including painting with two coats of synthetic enamel paint over a coat of primer to new surface including taking down old bar. Drg No: FD-1031

S & F of 8 mm dia round bar type locking device of suitable size and shape for almirah medium steel including painting with two coats of synthetic enamel paint over a coat of primer to new surface including taking down old bar. Drg No: FD-1032

S & F for Godrej Lock 6 Lever with two keys suitable for almirah Large/Medium steel including taking down of old lock. Drg No: FD-1031, FD-1032

S & F for Godrej Lock 6 Lever with two keys suitable for table steel all types including taking down of old lock. Drg No: FD-1003, FD-1004, FD-1005

S & F for Chromium plated MS handle 125mm long suitable for Godrej brand lock for almirah Large/medium steel including taking down old handle. Drg No: FD-1031, FD-1032

S & F for MS Shelving clips/supports made out 0f 10 gauge Sheet with required number of screws of suitable size for almirah large/medium including taking down of old shelving clips. Drg No: FD-1031, FD-1032

S & F for Lock cover (outers) Godrej pattern made out of 10 gauge MS sheet to the required size and shape for almirah Large/medium steel including taking down of old lock cover. Drg No: FD-1031, FD-1032

S & F for Safety type Hasp & staples of MS chromium plated size 75 x 40x3mm for Locker bed side steel including taking down of old Hasp & staples. Drg No: FD-1029

S & F for 2 mm thick mild steel chromium plated steel Handle 100 mm Long fixed to steel Locker bed side including taking down of old handle. Drg No: FD-1029

S & F 380mm long 15mm dia C P tubular pipe for cloth hanging, welded to T brackets on side of bed locker all as directed DRG NO FD-1029

Supply and fixing Steel Shelves for Almirah Large Steel with necessary clips, screws etc., including two coats of synthetic enamel paint over a coat of red oxide primer and tanking down old unserviceable shelves complete all as specified and as directed Drg No: FD-1031, Drg No: FD-1034

Supply and fixing Steel Shelves for Almirah medium Steel with necessary clips, screws etc., including two coats of synthetic enamel paint over a coat of red oxide primer and tanking down old unserviceable shelves complete all as specified and as directed Drg No: Drg No: FD-1032

Removing and providing spot welding/ continuous welding where ever required for repairing Joints, door hinges, bottom legs, corners and other minor repairs like fixing of sheet etc for almirah Large/Medium and Locker Bed side, tables etc. Drg No: FD-1003, FD-1004, FD-1029, FD-1031, FD-1032

M & L for Preparation of existing painted steel surface by cleaning thoroughly of dirt, fluxing material and scrapped with hand scraper followed by wire bushing or by blow lamp and finally sand papering the surface to remove all scales and rust. The surface shall then be wiped finally with mineral turpentine to remove oil, grease etc. If any dents and scratches, it shall be filled with using a good metal putty by knife pressing and finally applying two coats of synthetic enamel paint of shade green/ phirozi blue over a coat of red oxide primer as required & approved (spray painting) for the following:-

Almirah large steel with shelves Drg No: FD-1031

Almirah large steel 1/2H, 1/2SH Drg No: FD-1034

Almirah medium steel with shelves Drg No: FD-1032

Locker bedside steel Drg No: FD-1029

Shoe rack steel FD/E6/MAP-02

Book shelf steel Drg No:

Applying Two coats of synthetic enamel paint over green colors (spray painting) to steel parts of table office officers /clerks including scrubbing down the rusted steel surface and giving one coat of red oxide primer to rusted surface, after carrying out sheet metal repair works such as removing dents, minor welding works, applying metal paste / putty etc.for the following:-

Table office officers steel Drg No: FD-1003

Table office clerks steel Drg No: FD-1004

Table typist steel Drg No: FD-1005

M/s PRATAP VIJAYSINGHRAO DESAI

LAKSHMI DEVELOPERS