REPAIR/REPLACEMENT OF MISC B/R WORKS IN OTM ACCN AND MD ACCN OF HQ 101 AREA AND GE SHILLONG AND EME WORK SHOP AND 101 PRO UNIT AT SHILLONG UNDER GE SHILLONG

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work).

Ditto in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

S&F 20mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc complete all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed.

S&F framed work as in doors , gates or tank staging of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each including make good and all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 30mm thick flush shutter solid core construction with block board core complete and all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged all as specified and directed.

M&L for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Taking down shutters of any description but not exc 1 Sqm each all as specified.

M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) but n.exc 1.5 sqm each including make good and all as specified.

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I.

S&F pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm.

S&F Extruded Aluminium, anodised, bow handles of size 150mm.

S&F Extruded Aluminium, anodised, bow handles of size 100mm.

S&F aluminium anodised barrel bolts and fixed of 200 mm length

S&F aluminium anodised barrel bolts and fixed of 100 mm length

S&F for 4 leversBrass Mortice lock,vertical type,100mm length

S&F for 50mm dia cupboard polished hardwood knobs fixed with screws

S&F Satinless steel Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm.

S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm.

S&F powder coated anodized aluminium frame for doors/windows /ventilators/, partitions with one or more rebates including joining cleats for fixing to existing tiled/concrete floring as required. etc complete all as specified and as directed. (Note : Any damage made to existing flooring with fixing frames shall be made good by contractor without any extra cost and match with existing flooring)

S&F Power coating, anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and directed.

S&F Powder coating anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified.

S&F Sheet glass, 4.8mm thick ordinary quality, in squares,n exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

M&L 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified.

S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked)

Dismantling boarding any description fixed in any position with nails

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet/cup-board completed all as specified and directed.

M&L 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work ® Plywood, grade BWP,

M& L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed.

S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open)

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed

S&F in repairs 50mm dia, cupboard polished, hard wood knobs fixed with crews and washer of mild steel, bright finished

Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed

M&L for Non skid light shade, joint free ceramic tiles, 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M&L for paving vitrified ceramic colour tiles (heavy duty tile)of size 400 mm x 400 mm x 10 mm thick as in path etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

All as per Item No. 62above but as in vertical surfaces such as wall, skirting and dado etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tiles over and including 10 mm thick backing course in cement sand mortar (1:4) complete all as specified and directed.

M&L for machine pressed pre polished chequered cement concrete tiles 300x300x25mm thick over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in hardstanding, path, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

Demolition of precast concrete block walling built in cement mortar complete all as directed.

M&L Precast cement concrete block masonry with solid block exc 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description in any position not otherwise described

M&L Precast RCC cover slab etc type B1 (1:2:4) using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.

M & L TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire not less than 0.90 mm dia on securing with clips complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

Supply only integral WPC (ISI Mark)

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed.

S&F in repairsVitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Urinal spreader ofchroumium plated any colour for fixing with 15 mm dia pipe.

S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs

S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap including jointing to pipe complete all as specified and directed.

S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern all as specified and directed

S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets all as specified and directed

S&F in repair Vitreous china (Pedestal pattern) WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste pipe all as specified and directed

S&F in repair Bip tap, chromium plated, 15mm fancy type,

S&F in repairs to 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms).

S&F in repairs to 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)

S&F in repairs to 15mm bore angle valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight15mm-90gms/ 20mm-92gms)

Taking up or down steel tubing and connections for 15 mm bore of pipes

Taking up or down steel tubing and connectionfor 20 mm bore of pipes

S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor

S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete

S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore (Make : SONA or equivalent)

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repair Sink/wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair Tubular towel rail 20mm dia 600mm long with brackets and fixed with screw

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

S&F in repairs Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed by Engr-in-Charge

S&F in repair PVC (SWR) bends, any radius, 110 mm bore

S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete as directed

S&F in repair PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with wooden beading in square n exc 0.5 sqm in each pan.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 40mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc all as specified.

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F vitreous china bowl urinal flat back full stall type white (excluding flushing cistern flush pipe and waste pipe) complete all as specified and as directed

S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed

S & F in repairs RIMLESS, BLIND INSTALLATION wall hung Vitreous China EWC including seat cover closed pattern of size 375x520x400mm complete of make Jaguar Cat Part No :- SLS-WHM-6953BIUFSM or equivalent in make cera, parryware or Hindware

S & F in repairs Single piece slim concealed cistern body with alnstallation kit & P Type drain pipe conncetion set for wall hung WC (Without flush control unit complete of make Jaguar Cat Part No :- JCS-WHT-2400P or equivalent in make cera, parryware or Hindware

S & F in repairs control plate Opal for wall hung WC (Without flush control unit complete of make Jaguar Cat Part No :- JCP-CHR-152415 or equivalent in make cera, parryware or Hindware

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39903 size 700x435x135 mm incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat part No-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F in repairs shower panel made of black tempered glass body with 2 ABS body massage jet and over head shower with shower arm incl hand shower with flexible hose and brass spout and glass shelf as per Jaquar Cat Part No JPL-BLK-GO842JAX or equivalent in Parryware/Prayag/Cera

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

S&F for Low density polyethylene (Waste pipe 32mm dia) pipes of pressure rating 6 kgf/sq. cm

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in kitchen plateform/wall/Cills/counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering complete.

M&L for Preparation and applying one coat of weather emulsion paint for exterior surfaces complete and as directed

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete.

S&F in repairs 20 mm dia harrison rails,(Curtain Rod) chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F in repairs 20 mm dia rod brackets stops , rollers etc wooden finished all as directed and specified.

Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 nexc 500 ltrs incl writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 nexc 1000 ltrs incl writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S K Construction (BID ID -3372027)

TN CONSTRUCTION (BID ID -3378155)