Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC RM 01 RIDHISIDHI I SRI GANGANAGAR 335001 RAJ | SRI GANGANAGAR | SRI GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC The lowest tenderer | |
| 2 | L2₹31.9 L+₹14,434 (0.45%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L2 | Rejected-Finance Not the lowest tenderer | |
| 3 | L3₹32.0 L+₹19,356.50 (0.61%)Rejected-Finance H NO 1 BLOCK NO 2 SRI GANGANAGAR 335001 RAJ | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Not the lowest tenderer | |
| 4 | L4₹32.6 L+₹80,170.76 (2.52%)Rejected-Finance | L4 | Rejected-Finance Not the lowest tenderer | |
| 5 | L5₹32.8 L+₹99,574 (3.13%)Rejected-Finance | L5 | Rejected-Finance Not the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹86,400
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
SPL REPAIR TO COOK HOUSE BLDG NO P 62 6 OR MESS AT SRI GANGANAGAR MIL STN
2024_MES_641832_1
CA NO CWE SGNR T-73 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SRI GANGANAGAR
As per NIT
9 documents required · 9 mandatory
₹500
GE SRI GANGANAGAR
₹86,400
9 May 2024
10 Feb 2024
11 Mar 2024
10 Feb 2024
9 Mar 2024
24 Feb 2024
Amount
Dismantiling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer - in - Charge.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)
M&L for Roof treatment to RCC roof as follows :- (a) Cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints,washing,drying and removing all dirt/dust to receive concrete padding/ plaster etc complete all as specified and directed by Engineer - in - Charge. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC , finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based polymeric membrane,minimum weighing 3 Kg/Sqm reinforced with non woven polyster fabric (weight not less than 150 gms/Sqm) by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer-in-Charge.
Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/ as per site requirement and cured well before laying membrane by torching. (ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only.The name of firm shall be got approved by GE before execution the work. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarantee of treatment shall be for minimum 10 years reckoned from date of completion of whole work.
S&F heat resistance tiles of size 300x300x10mm thick on roof slab of any colour approved over and laid including 15mm thick in CM 1:4.Techinical specification of roof tiles shall be as prer IS 4457:2007 complete all as specified and directed by Engineer - in - Charge.
M&L for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in benching (gola) making concave shape gola of 80mm radius at juctions of roof/terrace with parapets/sides walls complete all as specified and directed.
Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new interior surfaces for Distempering (over a coat of 2mm thick cemet based putty) with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50 gms/Litre, of approved manufacturer, of required shade and colour complete , as per manufacturers specification, Two or more coats of new work all as specified and directed by the Engr-in-Charge.
M&L for applying two or more coats to new surfaces of 100% premium acrylic emulsion paint (over a coat of 2mm thick cement based putty) having VOC less than 50gm/Litre and UV resistance as per 15489: 2004, Alkali resisstance exterior paint of required shade (Company depot tinted) with silicone additives @1.43 litre/10sqm over and including priming coat of exterior primer applied @0.90 Litre/10 Sqm over new surfaces all as specified and directed by Engineer-in-Charge.
M&L three coats of white wash to new surfaces on ceilings including preparation of surface complete all as specified and directed.
M&L for scraping existing treatment to walls and washing down with water and applying two or more coats to new surfaces of 100% premium acrylic emulsion paint (over a coat of 2mm thick cement based putty) having VOC less than 50gm/Litre and UV resistance as per 15489: 2004, Alkali resisstance exterior paint of required shade (Company depot tinted) with silicone additives @1.43 litre/10sqm over and including priming coat of exterior primer applied @0.90 Litre/10 Sqm over new surfaces all as specified and directed by Engineer-in-Charge.
M&L for scraping of existing treatment to walls and washing down with water and preparing old interior surfaces for Distempering (over a coat of 2mm thick cemet based putty) with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50 gms/Litre , of approved manufacturer, of required shade and colour complete , as per manufacturers specification, two or more coats of new work all as specified and directed by the Engr-in-Charge.
M&L two coats of white wash to old surfaces on ceilings including preparation of surface complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, AC insulation etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description.
S&F for power coated aluminium snap grid frame work for false ceiling including hangers all as specified. (size 605x605mm).
S&F 10mm thick PVC solid PVC false ceiling of size 600x600 with approved design inserted to timber/GI/Aluminium framework with screws.
Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed.
S & F galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed.
Fixing only tubes, of 15mm bore medium grade to walls and ceilings or laying in floors complete all as specified and directed.
Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed.
S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed.
Fixing only tubes, of 20 mm bore medium grade to walls and ceilings or laying in floors complete all as specified and directed.
Dismantling water tanks any type exc.250 ltr but n.exc 500 ltr complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks any type exc. 500 ltr but n.exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.
S & F 500 ltr rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity.
S & F 1000 ltr rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity.
Supply and fixing in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.
M&L for providing Reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) as in slabs supported on walls , beams and columns in floors, roofs landings, balconies, canopies, deck slab and in shelves complete all as specified and directed by Engineer in charge .
M&L for formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work not exceeding 200mm thick all as specified and directed by Engineer-in-Charge.
M&L providing reinfoced cement concrete design mix M-25 (20mm graded stone aggregate) as in chajjas etc and similar work complete all as specified and directed by Engineer-in-Charge. Note : The rate quoted shall be deemed to include of necessary form work.
M&L providing reinfoced cement concrete design mix M-25 (20mm graded stone aggregate) as in beams , cantilevers , bresummers , lintels over 1.5 span or similar work complete all as specified and directed by Engineer-in-Charge.
M&L for Form work to sides and soffits of floor or roof beams , beam haunching, girderss , bressummers, lintels, cantilevers , shelves including supports , over hangs, etc, .also splays between floors and beams etc. Complete all as specified and directed by Engineer-in-Charge.
M&L providing reinfoced cement concrete design mix M-25 (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts or similar work complete all as specified and directed by Engineer-in-Charge.
M&L for Formwork to sides of columns, pillars, struts, piers, posts and stanchions complete all as specified and directed.
M&L TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.
M&L TMT bar 6 to 8 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.
M&L in repair providing precast 40mm thick RCC Jallies (cement concrete Type B0 1:2:4 12.5mm graded stone aggregate) louvres and jallies including all mouldings & set in CM 1:4 and demolition comnplete all as specified and directed by Engineer-in-Charge.
M&L for rollled mild steel grade FE-410 -W (Gde E-250 quality A as in roof trusses (framed), trussed, purlins, crane gantries , rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections ) including distance peices, cleats etc.
S & F for Flat iron for wind ties, plates (plain or chequered) channels, posts, square cut or notched (ordinary and counter sunk) forming holes etc Fe 410 -W (Gde- E- 250) quality- A.
S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, and screwed the other,or screwed both end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long and dia of neck 11 to 15mm complete all as specified and directed by Engineer-in-Charge.
S&F Prepainted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for 5mm thick plain coloured PVC Sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed by Engr-in-Charge
M&L for 5mm thick PVC sheet fitted of width 35mm for wall panelleing inclusive of fixing on to wall to make PVC frame as per specification
Taking down steel window / ventilators any size complete all as specified and directed by Engineer-in-Charge..
Taking down chowkhats or frames with shutter (without taking off shutters from the frame ) not exc 1.5 Sqm complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutter (without taking off shutters from the frame ) exc 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer-in-Charge.
M&L powder coated aluminium frames for doors, windows with one or moe rebates including jointing cleats for fixing etc.including power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified.
S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified.
S&F steel windows with side hung shutters including hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded.
S&F Powder coated aluminum door shutter, aluminum section weighing 0.55 kg/m including necessary jointing cleats glazing clips, rubber neoprene packing , handles 2 Nos in each door , SS hinges powder coated snap beading screws etc complete all as specified and directed.
S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.
S&F Aluminum alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in- charge.
S&F Aluminum extruded section hydraulic door closer designation No 2, universal type for door shutter of 701 to 850mm in width and of weight between 36 to 60 kg.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M & L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing over and including 15mm of screed bed in CM 1:6 complete all as specified and directed.
M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges over and including 10mm of backing coat in CM 1:4, complete all as specified and directed.
M & L granite (of any type) work 16 to 20 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm of screed bed in CM 1:6 complete all as specified and directed.
M&L pressed steel frame for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.
M&L pressed steel frame for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.
M&L providing cement concrete (1:3:6), type C1, using 20mm graded stone aggregate for filling in pressed steel frames and other similar items etc complete all as specified and directed.
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165).
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S & F factory made 35mm thick shutter, plain, framed, panelled shutters factory made(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.
S & F Second class hard wood glazed and skeleton Door, window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a).
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 Sqm but not exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified.
M&L 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling sub base as in floors, sub floor etc finished even and smooth all as specified and directed.
M&L 25mm thick cement concrete flooring type B0, 1:2:4, using 12.5 mm graded stone aggregate finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade 20mm graded stone aggregate) complete all as specified and directed.
M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throating etc and setting in mortar CM (1:4) complete with joints to match all as specified
M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graded stone aggregate as in plinth protection all as specified.
M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement all as specified.
Demolition of brick work built in cement mortar of any description.
M&L brickwork with flyash bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
All as Per Ser item No 86.00 above but except bricks.
S&F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21
S&F 125 alminium anodies barrel tower bolts of extruded section and fixed.
S&F 100mm long butt hinges, heavy weight, cold rolled Stainless Steel .
S&F aluminium handle cast type, anodised, 150mm long complete all as specified.
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F Mortice lock vertical type size, 100mm of brass, 4 levers to existing doors .
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads.
S&F 4mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane all as specified.
Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.
M&L one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.
M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L one coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed.
M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engineer-in-Charge.
Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed.
S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket.
S & F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.
Supply and fix in repairs stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed.
Supply and fix in repairs Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed.
S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm long as directed.
S&F in repair CP gratings 100 mm dia of PTMT (Minimum weight 25 gms).
Dismantling of cast iron or reinforced concrete drain pipes (any size) jointed in cement mortar and taking out of trenches, if required.
M&L for 100mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.
M&L for 75mm dia cast iron sand cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.
M&L for 100mm dia cast iron Bends.
M&L in repair bends for 75mm bore pipe of cast iron.
Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground leve .
S&F 110 mm dia PVC (SWR) bend with oval access door.
Supply and fixing drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel steel sheet not less than 20 guage, including brackets and pair of decorated end knobs, stop roller etc, pretreated powder coated natural color complete all as specified & directed by Engineer-in- charge.
Excavating post holes (or similar holes) each n.exc. 0.5 cum getting out returning filling, in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm including watering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specified and directed by Endineer -in -Charge.
M&L PCC 1:3:6 (40mm graded stone aggregate), type C2, in foundation filling mass and foundation of posts and struts complete all as specified and directed by Engineer -in -Charge.
S & F in repair stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repairs for Plate Rack Stainless steel 600 x 750 x 250 mm thickness of sheet 1 mm complete all as specified and directed.
S&F fiber glass reinforced plastic (FRP) Door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fire retardant grade unsaturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame.
S&F 30mm thick fiber glass reinforced plastic (FRP paneled Door Shitter of required colour and approved brand and manufacture made with fire-retardant grade unsaturated polyster resin. Moulded to 3mm thick FRP laminate for forming places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed.
S&F in Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination including lipping with second class hradwood, fixed with screws to timber frame work including sliding platform , paino hingesand wheels complete all as specified and directed by Engr-in-charge.
M&L for repair mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws , clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required.
Supply, fixing, testing & commissioning of electric chimney (90 cm) with feature of filter less & auto clean technology, oil collector tray, inbuilt light, digital display, noise level, 46 dB, 340W motor capacity with copper winding, extra installation kit, air suction capacity 1400 cum/h, input vol 220-240 V/50 Hz and fitting in wall as concealed or duct all as specified and directed by Engineer-in-Charge.
Supply and fixing of MS powder coated fly catchers machine with dimensions (L 24.5” X D 5.5” x H 17”), light source Philips actinic UV tubes (two tubes), capacity of 18 watt each of tube all as specified and directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed.
Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed by Engr-in-Charge.
M & L for sand cushioning with dry and clean locally available sand for underground cable 8cm before laying cable and 15 cm after laying cable and punned to 18 cm after laying of cable complete all as specified and directed by Engineer-in-Charge Note: Pressed thickness shall be considered for payment purpose
Supply and lay standard size bricks subclass B type complete all as specified and directed.
Supply and lay jointing and testing and commissioning in replacement of 25 Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing (light grade) 50mm dia for cable protection laid under path/ trench/ wall/ on pole all as specified and directed by Engineer-in-Charge.
Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.
All as per Ser item No 140.00 above but for one switch socket combination 5/6 Amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Ser item No 140.00 above but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Ser item No 140.00 above but for one switch socket combination 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.
All as per Ser item No 140.00 above but for one industrial socket metal clad 20 Amps on independent board with copper conductor 4.0 Sqmm complete all as specified and directed by Engineer-in-Charge.
S&F in replacement switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.
S&F in replacement switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer-in-Charge.
S&F in replacement switch socket combination 6 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer-in-Charge.
S & F in replacement socket outlet 5 Pin 5 Amps flush type flush type complete all as specified and directed by Engineer-in-Charge.
S & F in replacement ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S & F in replacement compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 feet version including LED lamp 10 watt complete all as specified.
S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.
S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge
S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.
S & F in replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge
Supply and fix in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.
S&F in replacement stepped type single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge
S&F in replacement of sub main wiring with two single core cable PVC insulated and unsheathed 6 sqmm (Nominal area) FRLSH standard copper conductor drawn in concealed PVC conduit dia 20mm "medium quality" conduit including 6.00 Sqmm (Nominal area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and covers including necessary connections, PVC flexible pipes are user in pannel board while connecting the cable complete all as specified and directed by Engineer-in-Charge. Note : Two run cable, one run of warth wire and one run of PVC conduit will be measured as one unit.
S & F in replacement sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.
S&F in replacement Sheet metal enclouser for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting SP & N 12 ways, 240 volts, ISI marked, 200 Amps busbar stove enameled dust and vermin proof suitable for incorporation MCBs and Isolators etc complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of MCCB TP & N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.
S & F in replacement MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.
M & L in replacement for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge
S&F in replacement security light fitting LED type 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge
S&F in replacement sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge.
S&F Heavy duty metal body exahust fan of 450mm sweep, 230 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.
Supply and fix PVC body tent/ industrial type desert cooler (1135 x 600 x 1535mm) alongwith four wheels, electric driven (single phase), 3 speed motor with 950 RPM, 30 inch axial type fan, noise level 68 db having nominal air blow capacity of 18000 CMH/ 10500 CFM, large size pad sixe (1100 x 100 x 1150 mm), water tank 90L capacity, black colour all as specified and directed by Engineer-in-Charge.
Dismantling and re-fixing of solar water heater at roof of cook house, unsecrewed grouting nuts/ bolts of panels atand on fabricated steel, removing of cble/ wiring of solar geyser, carefully dismantling of all GI pipes joints, after roof treatment all solar geyser with panels, tank, GI piping connection to be fixed in past form. Note : Contractor is fully responsible to rectify or bring new item of same make if damaged during the execution.
Fixing only ceiling fan any sweep and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engineer-in-Charge. Note : Ceiling fan will be supplied by the MES.
Fixing only Exhaust fan (MD supply) and connecting up including provision of cable from ceiling rose/ connector to fan and clean the existing exhaust fan with chemical solution all as specified and directed by Engineer-in-Charge. Note : Exhaust fan will be supplied by the MES.
Supply and fix RJ-45 data and TV socket each for connection of data network and TV cable (dish) all as specified and directed by engineer in charge.
S&F rigid non metalic PVC conduit 20mm dia inclusive of all tees, bends, elbows, reducers, bell, mouth tube ends and complete with all fixing accessories such as couples, lock nuts, saddles, pipe, hooks, etc all as specified and directed by Engineer-in-Charge.
PAREEK AND COMPANY
Gyan Chand Marothia Engineer Contractor And Suppliers
M/s HANS BROTHERS
J and P CONTRACTOR
SHIVA CONSTRUCTION COMPANY
Easyways Enterprises
M/S BUDHRAM BISHNOI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .