Tender for execution of Development Works to Kalleswara Temple (Construction of Sculpture Shed) at Ambli for the year 2025-26

Sub Heading 1

Removal of old grill from the dwarf wall at the corner of the compound wall by cutting and keeping it safely for reuse etc., complete all as per the directions of site in charge

Excavation work by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m., etc complete all as per the directions of site in charge.

Providing and laying1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources), etc complete all as per the directions of site in charge

Providing and constructing of Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with cement mortar 1:6 (1 cement: 6 coarse sand), etc complete all as per the directions of site in charge.

Providing and constructing of Random rubble masonry with hard stone in superstructure above plinth level and up to floor five level, including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement: 6 coarse sand) etc complete all as per the directions of site in charge.

Providing, fixing, fabrication and installation of structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat and two coats of enamel paint of approved color and brand etc all complete. (Provision for providing and erection of sculpture shed by using heavy 'C' Channel at the corners, frame structure by using 50 x 50 x 6 mm angle iron all around and on top of the shed and inserting the 16 mm square bars an interval of around 0.20 cm c/c all around and on top of the shed for the safety of the sculpture including cutting, welding, fabricating, lifting, carrying, fixing, all required necessary fixtures etc complete all as per the directions of site in charge.

Providing and constructing of Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6(1 cement: 6 coarse sand) etc complete all as per the directions of site in charge.

Providing and applying plaster of 20mm thick in 1:4 (1 cement: 4 coarse sand) including all charges, etc complete all as per the directions of site in charge

Providing and fixing corrugated G.I. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m². etc complete all as per the directions of site in charge.

Providing Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand): Flush/ Ruled pointing etc complete all as per the directions of site in charge

Providing and fixing of benches using granite stone slabs with 2-line dressing including, cutting, moulding, chamfering, lifting, carrying, fixing, cost of all charges etc complete all as per the specifications and directions of site in charge.