REPAIR TO INTERNAL ROAD AND CONNECTED ITEMS IN THE AREA OF ZONE-I AND ZONE-II AT AGE B/R-I UNDER GE GWALIOR

Amount

Scarifying or picking graveled macadam or bituminous macadam surfaces in area n exc 400 sqm each and depth exc. 50 mm but n. exc 100 mm complete all as specified and directed.

M&L for WBM of 75 mm thick (compacted thickness) with coarse aggregate (Limestone or sandstone) of grading 2 (90 to 40 mm size) spread, rolled and consolidated to gradient and camber required with power roller 8 to 12 Ton complete all as specified and directed.

M&L for preparing surfaces of un-surfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10, @ 10 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous macadam with using paving bitumen VG-30, as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) by means of mechanical paver complete all as specified and directed.

M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 40 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid / spread uniformly by means of pavers mechanical over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed. Note : Filling of any pot holes (coming in the area to be re-carpeted) in the item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid / spread uniformly by means of pavers mechanical over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and as directed. Note : Filling of any pot holes (coming in the area to be re-carpeted) in the item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

M&L for moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed.

M&L for one coat of Painting Lines, Dashes, arrows, letters etc. on roads, pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow (retro reflective thermo plastic road marking paint 1.25 mm thick, uniform finish yellow / white in colour, applied by machine) ,all as specified and conforming to BS 3262-1989 including cleaning of surface completed all as specified and as directed.

S & F in repairs CAT eye solar reflected type of metal body allow of size 100 x100x20 mm with PAMA striplens reflector of modal no DA-972.0 fixed with and including MS studs of suitable size as per manufactures instructions etc completed all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and Fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt NI-ed recharchable battary ( 1.2V/ 1600ma) consisting of super bright LED with 10000 to 18000mcd completed as per manufatures instruction etc completed all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specifeid and directed

M & L, for 100mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1: 4 for laying floor finishes complete all as specified and directed.

M&L for chequered cement concrete tiles 200mm x 200mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and as directed.

S&F in repair ABS engineering plastic road speed breakers dynamically designed having high impact reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and size 750x75x250mm incl fixing with epoxy screed bed all as per manufacture direction, complete all as specified and directed.

M/s Bijender Singh

M/s Himgiri construction