KMC/WS/GRWW/T-27/2025-26

Amount

INCOMER FEEDER / TIE FEEDER : SUPPLY AND DELIVERY OF 11 KV , 800 A , 26.3 KA FOR 3 SEC, BIL- 20 KV RMS/60KVP, 12 NO + 12 NC , 64 PIN 8BK88 PLUS INDOOR TYPE VCB SWITCH BOARD WITH COPPER BUS BAR COMPRISING THE FOLLOWING EQUIP MENTS - CT - 800 - 400 / 5 - 5 A , (15 VA , CL 1.0 & CL 5P10), PT - 6600 / 1.732 / 110 / 1.732 ( 200 VA, CL- 0.5 AND 50 VA , CL- 3P ), FEEDER PROTECTION RELAY - 7SR1003 (50-51-50N-51N) WITH MODBUS PROTOCOL, AUX RELAY - VAJH 13, VAX-31, VOLMETER WITH VSS, AMMETER WITH ASS AND MFM- ELITE 447, CL- 1.0 WITH RS 485, 8-WINDOW ANNUNCIATIOR, 110 V DC FOR CLOSING AND TRIPPING THROUGH POWER PACK, 220 V AC FOR SPRING CHARGING MOTOR, HOOTER, INDICATION LAMP, TERMINAL BLOCK, FUSE,MCB ETC.(DETAILED BILL OF MATERIALS ENCLOSED IN SEPERATE SHEET) MAKE: SIEMENS/ SCHNEIDER/ ABB (COMPLYING SPECIFICATION).

TRANSFORMWER FEEDER : SUPPLY AND DELIVERY OF 11 KV , 800 A , 26.3 KA FOR 3 SEC, BIL- 20 KV RMS/60KVP, 12 NO + 12 NC , 64 PIN 8BK88 PLUS INDOOR TYPE VCB SWITCH BOARD WITH SURGE ARRESTOR AND COPPER BUS BAR COMPRISING THE FOLLOWING EQUIP MENTS - CT - 400-200/ 5 - 5 A , (10 VA , CL 1.0 & CL 5P10), FEEDER PROTECTION RELAY - 7SR1003 (50-51-50N-51N) WITH MODBUS PROTOCOL, AUX RELAY - VAJH 13, VAA-33, VAX-31, AMMETER WITH ASS AND MFM- ELITE 447, CL- 1.0 WITH RS 485, 8-WINDOW ANNUNCIATIOR, 110 V DC FOR CLOSING AND TRIPPING THROUGH POWER PACK, 220 V AC FOR SPRING CHARGING MOTOR, HOOTER, INDICATION LAMP, TERMINAL BLOCK, FUSE, MCB ETC.(DETAILED BILL OF MATERIALS ENCLOSED IN SEPERATE SHEET) MAKE: SIEMENS/ SCHNEIDER/ ABB (COMPLYING SPECIFICATION).

BUS-COUPLER FEEDER : SUPPLY AND DELIVERY OF 11 KV , 800 A , 26.3 KA FOR 3 SEC, BIL- 20 KV RMS/60KVP, 12 NO + 12 NC , 64 PIN 8BK88 PLUS INDOOR TYPE VCB SWITCH BOARD WITH RISER AND COPPER BUS BAR COMPRISING THE FOLLOWING EQUIP MENTS - CT - 800-400 / 5 - 5 A , (15 VA , CL 1.0 & CL 5P10), FEEDER PROTECTION RELAY - 7SR1003 (50-51-50N-51N) WITH MODBUS PROTOCOL, AUX RELAY - VAJH 13, VAX-31, AMMETER WITH ASS AND MFM- ELITE 447, CL- 1.0 WITH RS 485, 110 V DC FOR CLOSING AND TRIPPING THROUGH POWER PACK, 220 V AC FOR SPRING CHARGING MOTOR,INDICATION LAMP, TERMINAL BLOCK, FUSE, MCB ETC.(DETAILED BILL OF MATERIALS ENCLOSED IN SEPERATE SHEET) MAKE: SIEMENS/ SCHNEIDER/ ABB (COMPLYING SPECIFICATION).

OUTGOING FEEDER : SUPPLY AND DELIVERY OF 11 KV , 800 A , 26.3 KA FOR 3 SEC, BIL- 20 KV RMS/60KVP, 12 NO + 12 NC , 64 PIN 8BK88 PLUS INDOOR TYPE VCB SWITCH BOARD WITH COPPER BUS BAR COMPRISING THE FOLLOWING EQUIPMENTS - CT - 800-400 / 5 - 5 A , (15 VA , CL 1.0 & CL 5P10), FEEDER PROTECTION RELAY - 7SR1003 (50-51-50N-51N) WITH MODBUS PROTOCOL, AUX RELAY - VAJH 13, VAX-31, AMMETER WITH ASS AND MFM- ELITE 447, CL- 1.0 WITH RS 485, 110 V DC FOR CLOSING AND TRIPPING THROUGH POWER PACK, 220 V AC FOR SPRING CHARGING MOTOR,INDICATION LAMP, TERMINAL BLOCK, FUSE, MCB ETC.(DETAILED BILL OF MATERIALS ENCLOSED IN SEPERATE SHEET) MAKE: SIEMENS/ SCHNEIDER/ ABB (COMPLYING SPECIFICATION).

ERECTION, TESTING & COMMISSIONING OF 11 KV, 800A, 25KA FOR 3 SEC. 12 PANEL VCB SWITCH BOARD WITH AI BUSBAR COMPRISING FOLLOWING PANEL 1. INCOMER - 2 NOS. 2. TRANSFORMER FEEDER - 2 NOS. 3. OUTGOING FEEDER - 3 NOS. 4. BUS-COUPLER - 1 NO.

5.3. A 3. SUPPLYING OF11KV GRADE THREE CORE 300 SQ.MM HT POWER CABLE WITH STRANDED COMPACTCIRCULAR ALUMINIUM CONDUCTOR, CONDUCTOR SCREEN WITH EXTRUDED SEMI CONDUCTINGCOMPOUND, XLPE INSULATED, INSULATION SCREENING WITH EXTRUDED SEMI CONDUCTING COMPOUND IN COMBINATION WITH COPPER TAPE, CORES LAID UP, INNERSHEATH OF PVC, GALVANISED STEEL FLAT STRIP ARMOURED, AND OVERALL PVC SHEATHED CABLE CONFORMING TO IS 7098 (PART-2) 2011 WITH UP TO DATE AMENDMENTS.

5.3. A 3. SUPPLYING OF11KV GRADE THREE CORE 400 SQ.MM HT POWER CABLE WITH STRANDED COMPACTCIRCULAR ALUMINIUM CONDUCTOR, CONDUCTOR SCREEN WITH EXTRUDED SEMI CONDUCTINGCOMPOUND, XLPE INSULATED, INSULATION SCREENING WITH EXTRUDED SEMI CONDUCTING COMPOUND IN COMBINATION WITH COPPER TAPE, CORES LAID UP, INNERSHEATH OF PVC, GALVANISED STEEL FLAT STRIP ARMOURED, AND OVERALL PVC SHEATHED CABLE CONFORMING TO IS 7098 (PART-2) 2011 WITH UP TO DATE AMENDMENTS.

5.3 B / 4 : LAYING OF ONE NUMBER PVC INSULATED AND PVC SHEATHED/ XLPE POWER CABLE OF 11 KV GRADE OF FOLLOWING SIZE IN THE EXISTING MASONORY OPEN DUCT AS REQUIRED. ( B) ABOVE 120 SQ. MM AND UPTO 400 SQ.MM.

Making Indoor type End termination Joint by providing all required terminal joints accessories {viz Heat Shrink Type End Termination Jointing Kits complete with all accessories for 3 core 6.6KV(UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor}& man/equipments tools & tackles etc with the relevant Switch Gear inside the Pumping Station or Switch Room with care & caution including compliance of relevant safety norms & conforms to the relevant IS and complete in all respect as per direction of EIC. 3 core 6.6KV (UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor of following Sizes 240- 300 Sq mm Indoor type Heat Shrinkable Joint (Rechem KIT No- EPKT 3121)

Making Straight through Joint by providing all required jointing accessories {viz-viz Heat Shrink Type End Termination Jointing Kits complete with all accessories for 3 core 6.6KV (UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor} & man/equipments tools & tackles etc with care & caution including compliance of relevant safety norms & conforms to the relevant IS and complete in all respect as per direction of EIC. 3 core 6.6KV (UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor of following Sizes 240- 400 Sq mm Indoor type Heat Shrinkable Joint (Rechem KIT No- EPKJ 3118)

Earthing Installation by GI pipe ... (FOR Sub(station Neutral/Equipment earthing).Earthing with 80 mm dia GI pipe (TATA(Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (HOT Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

Earth busbar Supplying & fixing earth busbar of galvanized (HOT Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

Hire charges of moveable crane with fuel & manpower having load handling capacity upto 14MT with the 45 deg. moveable arrangement & the boom length of 40 feets for loading & unloading of various materials / accessories of water supply works. For minimum engagement of 8 hrs. In a day

Labour Rates Per Diem : 1)Mason (Head). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages

Supply, and fixing of HT insulation rubber Mat of the following sizes :- 6.0 mm thick (upto 11 KV)

Supply and delivery of 230V,50Hz Heavy duty Metal 12"exhuast fan.

BINA ENGINEERING ENTERPRISE (BID ID -7283158)

Traders and Engineers Private Limited (BID ID -7299014)