REPAIRS TO ROOFING,SHEETS,FLOORING, JOINERY,PLUMBING,TILING INCLUDING IMPROVEMENTS TO COOK HOUSE,TOILETS AND SANITARY SHAFTS AREA ETC OF OTM ACCN AT AIR FORCE STATION SRINAGAR

Amount

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting any gauge in roof coverings complete all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description exc 1 sqm but n exc 2 sqm each and refixing in same opening after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description n exc 1 sqm each and refixing in same opening after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description exc 1 Sqm and not exc 2 Sqm each and removing from site etc all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description exc 2 Sqm each, and removing from site etc all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm all as specified and directed by Engineer-in-Charge. Note: The damaged portion of the tiles/rendering brick work shall be made good with the same material to match with the adjacent surface and nothing extra shall be paid on this account.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm all as specified and directed by Engineer-in-Charge. Note: The damaged portion of the tiles/rendering brickwork shall be made good with the same material to match with the adjacent surface and nothing extra shall be paid on this account.

Dismantling timber scantlings framed work 40 sq. cm and over in section, in any position complete all as specified and directed by Engineer-in-Charge

Dismantling boarding any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection complete 20 mm bore, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection complete 15 mm bore, complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Galvanised, corrugated mild steel sheeting, 0.63 mm thick with two corrugations side lap,fixed with coach screws and washers , in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

M&L for Galvanised, corrugated mild steel sheeting, 0.63 mm thick with two corrugations side lap,fixed with coach screws and washers , in roofs, walls etc with grade of zinc coating 275 fixed with coach screws and washers,except sheeting , complete all as specified and directed by Engr-in-Charge.

M&L for Plain, galvanised, mild steel sheeting, 0.80mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with coach screws and washers , complete all as specified and directed by Engineer-in-Charge.

M&L for tightening / Closing bolt holes, etc.,to rectify the leakage / seepage in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length (Ditto) complete all as specified and directed by Engineer-in-Charge

S&F for Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in Ist class softwood all as specified and directed by Engineer-in-Charge

S&F 30mm thick Ist class softwood, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); Complete all as specified and directed by Engineer-in-Charge

S&F 35mm thick Ist class softwood Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); , Complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick Ist class softwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers;Complete all as specified and directed by Engineer-in-Charge

S&F Mild Steel, 300mm ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F for Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge

S&F Butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 150mm size complete all as specified and directed by Engineer-in-Charge

M&L for Plain cement concrete 1:2:4 type B-0 using 20mm graded stone aggregate for holdfasts, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick Sheet glass as in repair ordinary quality and glazing with oil putty in squares not exc 0.5sq m , complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty / beading in squares not exc 0.5sq m complete all as specified and directed by Engineer-in-Charge.

M&L Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples,as in repairs complete all as specified and directed by Engineer-in-Charge.

M&L Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples,complete all as specified and directed by Engineer-in-Charge.

S&F Figured Glass pin head type 4mm thick n exc 0.5 Sqm and glazing with oil putty fixed in repairs, Complete all as specified and directed by Engineer-in-Charge

S&F Mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, as in repairs, complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hardwood,timber framed and fixed,wrought,in scantlings complete all as specified and directed by Engineer-in-Charge

M&L for Particle board 12mm thick, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with nails to timber frame work,as in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars,aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws,anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)Complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc as approved by GE complete all as specified and directed by Engineer-in-Charge

M & L for repairing aluminium door/window n exc 1.50 Sqm by taking out aluminium door/window shutter & fixing missing screw of frame to wall,adjusting floor door spring,repairing hook joints of frame,replacing rubber gasket of door,refixing of existing door hinge or replacing with same size hinge with frame after adjustment and re erecting in good working condition by necessary lubrication all as specified and as directed by the Engineer-in-Charge.

M & L for repairing aluminium door/window exc 1.50 and n exc 4.00Sqm by taking out aluminium door/window shutter & fixing missing screw of frame to wall,adjusting floor door spring,repairing hook joints of frame,replacing rubber gasket of door,refixing of existing door hinge or replacing with same size hinge with frame after adjustment and re erecting in good working condition by necessary lubrication all as specified and as directed by the Engineer-in-Charge.

S&F Mortice lock, vertical type, size 75mm 4 lever aluminium body for aluminium door, complete all as specified and directed by Engineer-in-Charge

S&F Door closer aluminium (extruded body) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge

S&F Mortice lock, vertical type, size 75mm 4 lever aluminium body for aluminium door, in repairs, complete all as specified and directed by Engineer-in-Charge

S&F Door closer aluminium (extruded body) hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neoprene gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge.

S & F Asbestos cement plain building boards/tiles 6mm thick for insulation and acoustic purposes, any size, fixed with screws to timber frame work or with staples on snap grid, on ceiling, Complete all as specified and directed by Engr-in-Charge.

S & F 6mm thick (5ply) plywood, Grade BWR,Type BB fixed with screws to timber framework complete all as specified and as directed by Engineer-in-Charge.

M & L for Ist class softwood plain fillets, square or rectangular or triangular in section clean sawn exc 6 Sqcm but not exc 13 sqcm in repairs, secured with nails or screws in repairs , complete all as specified and directed by Engineer-in-Charge.

M&L 18-20mm thick Granite (of any type) tiles machine cut , rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation laid over and including 15mm thick cement screed bed CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and directed by Engineer-in-Charge.

M&L Granite (of any type) tiles 16-20mm thick machine cut as in dado/skirting, over 10mm backing coat of cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types, Complete all as specified and directed by Engineer-in-Charge

M&L 75mm thick Plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in Plinth protection/path and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Non skid straight edge (Joint free) Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:6, Complete all as specified and directed .

Material & Labour for glazed ceramic tile in verticle surface such as skirting and dados size 450x300x7-8 mm thick on screed bed or bedding layer of mortar 10mm thick in CM( 1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade.

Material & Labour for double charged Vitrified coloured tiles 7-10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying tile. complete all as specified and directed by Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engineer-in-Charge.

Formwork to sides and soffits of rough finish surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete,type B1,1:2:4 using 20mm graded crushed stone as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S & F Steel rolling shutters, thickness of lath is 1mm, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual operated type,fixed in repairs, complete all as specified and directed by Engineer in charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L 20mm bore Steel water tubing galvanised "medium grade" with all fittings and fixed to walls, ceiling or laid in floor,or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.

Description All as per item 71 here-in-before but except steel tubing of 20mm dia bore as in refixing, complete all as specified and directed by Engineer-in-Charge.

M&L 15mm bore Steel water tubing galvanised "medium grade" with all fittings and fixed to walls, ceiling or laid in floor,or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.

Description All as per item 73 here-in-before but except steel tubing of 15mm dia bore as in refixing, complete all as specified and directed by Engineer-in-Charge.

M&L Lagging to pipes of 15mm bore water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

M&L Lagging to pipes of 20mm bore water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh on already existing GI pipes complete all as specified and directed by Engineer-in-Charge

M & L for repairing to urinal sensors including all necessary fittings and fixture complete to make smooth functioning of sensor urinals, complete all as specified and directed by Engineer-in-Charge.

S&F CP Health faucet fixed with spring action and lever along with health faucet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets as fixed in repairs, Make : Cera, Cat Part No : F8030103 or equivalent in ESSCO,Complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water15 mm dia bore fixed in repairs, Make : Cera, Cat Part No : F2002461 or equivalent in ESSCO, complete all as specified and directed by Engineer-in-Charge.

S&F TubularTowel rail 600mm long of CP fixed with screws, including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), as in repairs complete all as specified and directed by Engineer-in-Charge. Make: Cera or equivalent in ESSCO

S&F as in repair Bib tap of PTMT any color high pressure screwed for iron pipe 15mm bore fixed (Minimum weight 90 Gms),, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge

S&F as in repair vitreous China wash basin, white, flat back, size 630x450mm with & including 32mm dia PVC waste pipe and waste coupling including angle iron brackets, complete all as specified and as directed by the Engineer-in-Charge

S & F for Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete in repair, Complete all as specified and directed by Engineer-in-Charge

S & F for Vitreous China bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), fixed in repairs Complete all as specified and directed by Engineer-in-Charge.

S & F for Wash down water closet (EWC) white with P or S trap including flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc as in repairs complete all as specified and directed by Engineer-in-Charge

S & F for PVC connections 15mm size with PTMT nuts of length 450mm, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S & F for PVC valveless, syphonic action type, flushing cistern, low level 10 litres capacity, white, with inlet, ball valve, float and handle including brackets, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall, as in repairs complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall as in repairs complete all as specified and directed by Engineer-in-Charge

S&F 75mm bore PVC(SWR) door bends any radius fixed in repairs complete all as specified and directed by Engineer-in-Charge

S&F 110mm bore PVC(SWR) door bends any radius fixed in repairs complete all as specified and directed by Engineer-in-Charge

S&F as in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks (Triple/three layered) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.

S&F as in repairs 1000 litres capacity Rotational moulded polyethylene water storage tanks (Triple/three layered) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bib tap CP, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule fancy type, as in repair complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Stop/angle valves of PTMT any colour high pressure screwed for iron pipe 15mm bore fixed (Minimum weight 90 Gms),, screwed both ends for iron pipe or for unions and complete all as specified and directed by Engineer-in-Charge

S & F in repairs 15mm dia stop valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F as in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe 15mm bore and fixed (Minimum weight 15mm-142 gms) complete all as specified and directed by Engineer-in-Charge

S & F in repairs fancy type pillar cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel surfaces of steel of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

M&L for Preparation of new or previously untreated wooden surfaces of wooden of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over 2-3mm thick wall care putty applied in two coats to obtain the smooth surfaces with a coat of primer complete all as specified and directed Engineer-in-Charge.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint of any colour or tint as ordered on surfaces of wall including cornices complete all as specified and directed by Engineer-in-Charge.

M/S GULZAR ENTERPRISES

M/S M.R. Construction

M/S GULAM AHMAD ABDUL SAMAD