SASD KONDAGATTU

Drilling holes in hard granite or sheet rock 25mm dia Pneumatic compresor including cost and conveyance of all materials and labour charges etc., complete.(Sl.No.143 P.N .28)

Grouting the holes 25mm dia with neat cement slurry excluding cost of steel including including cost and conveyance of all materials and labour charges etc., complete.(Sl.No.146 P.N .29)

Supply and placing VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, steel centering & steel shuttering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, centering, shuttering, and also excluding seigniorage charges and taxes like GST etc. (APSS 403) A] PLINTH BEAM

Plastering to ceiling with 12mm thick single coat in CM (1:3) dubara sponge finish including cost and conveyance of all materials and labour charges, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, over heads & contractor profit, but excluding seignorage charges and taxes like GST, etc., complete for for finished item of work. (APSS 901 &903) (CSSR).

Supply, fabricating and fixing hand railing / Iron grill in position using MS tubes & pipes, flats as per IS 1161 including cost & conveyance of materials to site, fabrication, labour charges for fixing etc., in position complete, excluding taxes like GST etc. 50mmX50mmX4mm thick angular pattie

Supply, fabricating and fixing hand railing / Iron grill in position using MS tubes & pipes, flats as per IS 1161 including cost & conveyance of materials to site, fabrication, labour charges for fixing etc., in position complete, excluding taxes like GST etc. To Gate

Providing HYSD / TMT steel bars (Fe 415/ Fe 500 / Fe550 Grade as per IS 1786 to 1979) of different diameters for RCC works, including labour charges for straitening, cutting, bending to required sizes and shapes, placing in positions with cover blocks of approved materials and size and tying and lapse splicings with binding wire of 18 guage forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as over lapse, coupling, chairs, spacer bars, including cost and conveyance of binding wires, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding taxes like GST on all materials etc., complete foer finished item of work in all floors (APDSS No.126). For bars < 36mm dia for reinforcement (APDSS No.126)

Painting with Synthetic Enamel paint Two coats over primary coat total 3 coats surface to remove all dirt and remains of loose powdered materials incluidng cost and conveyance of all materials and labour charges etc., but excluding taxes like GST etc., complete for finished item of work.

Supply and fixing of Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 3"x3" (76 mm x 76 mm) - 8 Gauge including cost and conveyance of all materials and labour charges etc., complete.