Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
23 Feb 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
07
1 condition
Regular/Bulk order 1. The bidder shall meet the requirements set out in RCF bid Document Ver- 14 clause 2.13.6, Similar item shall be Stainless tubes & Double ferrule Fitting for LHB/MEMU/Vande Bharat coaches(Its variant). Developmental Order 1. The bidder shall meet the requirements set out in RCF bid Document Ver- 14 clause 2.13.6.1. Firm should have in-house infrastructure and M&P for manufacturing of the tendered item and Firm shall have ISO or IRIS certification. Note: CCA/QAP Audit/FAI/Prototype shall be required if the supplier is manufacturing the tendered item for the first time. CCA: Capacity cum Capability Assessment: It shall be carried out after Placement of Letter of acceptance. Purchase Order shall be released only after successful completion of the CCA. QAP: Quality assurance Plant: To be submitted by the firm before the FAI. FAI: First Article inspection: It shall be carried out at firm's premises during manufacturing of the first product. Estimated purchase value Rs 1,23,80,062.04
21 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Third Party Inspection Agency.
For verification of local content, bidders shall submit certificate from authority as prescribed in clause no . 2.28.3 (b) of bid document ver.14
CONSIGNEE : DY.CMM(DEPOT/SHELL)/RCF/HSQ
QUANTITY SPLITTING : As per letter No STROSP9OTH)/61/2025-O/0 PCMM/ RCF dated 15/05/25 and as per clause No. 2.17.2 of Bid Document Version 14.0 with all corrigendum/amendments if any issued before closing of tender shall be applicable.
Installation of commissioning charge :- Firm to ensure to quote Installation and commissioning charge seperately in the offer.
SPECIAL CONDITION FOR GST : Special Note : Standard SVC along with the following clause will be applicable if any variation in the GST after opening of this tender if any variation in GST than firm must declare the following :- We hereby declare that in quoting the above price, we have taken into account the full effect of Input tax credit available under GST. We further agree to pass on any financial gain/ benefit as may become available in future in respect of all the input tax credit on the date of supply by way of reduction in price and advise the purchaser accordingly.%u201D We also undertake that we are aware of the provisions of section 171 of the CGST Act and consequences thereof if we fail to comply with the same.
Note : Notwithstanding the delivery period and/or schedule offered by the bidders in variance to the above, the purchaser reserve the right to incorporate the delivery period as per the tender condition and successful tenderers are expected to abide by the same."
All others condition of Bid Document Version 14.0 with all corrigendum and amendments if any issued before closing of tender shall be applicable.
1 location across Punjab · 62 Set total
SUPPLY,INSTALLATION,COMMISSIONING & TEST SUPPLY,INSTALLATION,COMMISSIONING & TESTING OF STAINLESS STEEL TUBES AND DOUBLE FERRULE FITTINGS FOR LHB NON-AC HOT BUFFET CAR COACHES.
07251255A~RCF
07251255A
Open - Indigenous
Goods
Punjab
₹0
₹2.5 L
23 Feb 2026
20 Jan 2026
1 item · 62 Set total
SUPPLY,INSTALLATION,COMMISSIONING & TESTING OF STAINLESS STEEL TUBES AND D OUBLE FERRULE FITTINGS FOR LHB NON-AC HOT BUFFET CAR COACHES. NOTE:-INSTALLATION CHARG ES ARE TO BE GIVEN/QUOTED SEPARATELY., as per Drawing: RCF/MD/MAT SCH/LWCBAC , VER-01 WIT H DESIGN CORRECTION SLIP NO.-01 & 02 DATED 02/04/2025 & 08/04/2025 respectively. SEPERATE PA CKING OF FURNISHING AND BOGIE ITEMS (FURNISHING ITEMS:- SET LIST ITEMS PAGE 01 GROUP A, B, TUBE LENGTH & PIPE CLAMPS. BOGIE ITEMS:- SET LIST ITEMS PAGE 02, GROUP E, F & G)., Packing Inst ruction: AS PER STANDARD PACKING. IT SHOULD BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH ADEQUATE STRENGTH. TRANSIT DAMAGE , IF ANY , SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SHELL DEPOT, RCF | Punjab | 62.00 Set |
| Total | 62 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .