Loading
Loading…
Loading…
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
23 Jul 2026, 6:00 pm
GE SHILLONG
GARISON ENGINEER SHILLONG DIVISION SHILLONG-793002
REPAIR / REPLACEMENT OF LT FEEDER PILLAR BOX AND LT PANEL OF MD /OTM ACCN AT VARIOUS LOCATION OF SHILLONG CANTT AND HAPPY VALLEY UNDER GE SHILLONG
2026_MES_776027_1
GE/SHL/TOKEN-53 OF 2026-27
Open Tender
Civil Works
180 days
GE SHILLONG
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE SHILLONG
₹80,000
Yes
2 Jul 2026
2 Jul 2026
24 Jul 2026
2 Jul 2026
23 Jul 2026
16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, installing, testing and commissioning in replacement outdoor type stainless steel (SS 304) cubical enclosure compartmentalized to accommodate following accessories exterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2 mm thick SS 304 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304. Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm). All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands. The various feeders shall be indicated by font size not less than 20 mm letters using Acrylic sheet . The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level. | |||||
| 1.01 | Incoming :- (i) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-01nos, MCCB 200A 25kA 4 Pole-01nos,MCCB 100A 16kA 4 Pole-04nos,MCCB 63A 16kA 4 Pole-01nos Changeover 63A 4 Pole-01nos
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) with analog street light timer switch with contactor Location -SS-01 SE Falls | 1 | Each Job | - | - |
| 1.02 | All as per Item No 1 here in before, but to accommodate following accessories :- (i) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii), MCCB 200A 25kA 4 Pole-02nos,MCCB 100A 16kA 4 Pole-02nos,MCCB 63A 16kA 4 Pole-01nos
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt
selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) analog street light timer switch with contactor
Location -SS_01 SE falls | 1 | Each Job | - | - |
| 1.03 | All as per Item No 1 here in before, but to accommodate following accessories :- (i) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-02nos, MCCB 200A 25kA 4 Pole-01nos,
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt
selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) analog street light timer switch with contactor
Location SS-01 SE falls | 1 | Each Job | - | - |
| 1.04 | All as per Item No 1 here in before, but to accommodate following accessories :- (i) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-02nos, MCCB 100A 16kA 4 Pole-04nos,MCCB 63A 16kA 4 Pole-01nos
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) with analog street light timer switch with contactor
Location SS=-1 SE falls | 1 | Each Job | - | - |
| 1.05 | All as per Item No 1 here in before, but to accommodate following accessories :- (i) MCCB 315 Amps 4 pole breaking capacity 25 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-02nos, MCCB 200A 25kA 4 Pole-01nosMCCB 100A 16kA 4 Pole-02nos,
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3)
SS-02 SE Falls | 1 | Each Job | - | - |
| 1.06 | All as per Item No 1 here in before, but to accommodate following accessories :- (i) MCCB 200 Amps 4 pole breaking capacity 25 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 63A 16kA 4 Pole-04nos,
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt
selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3)
SE falls Office area | 4 | Each Job | - | - |
| 2Supply, installing, testing and commissioning in replacement outdoor type stainless steel (SS 304) cubical enclosure compartmentalized exterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2 mm thick SS 304 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304. Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than 20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm). All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands. The various feeders shall be indicated by font size not less than 20 mm letters using Acrylic sheet . The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape. Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level. | |||||
| 2.01 | All as per item No. 2 above but Incoming :- (i) MCCB 630 Amps 4 pole breaking capacity 25 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-03nos, MCCB 160A 16kA 4 Pole-02nos,MCCB 63A 16K 4 Pole - 01 No.
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) (vi) Digital Street light Timer with contractor- 01 No. for B CAMP S/S NO. 01 & KEY PERSONNEL QTR DM LINE | 2 | Each Job | - | - |
| 2.02 | All as per Item No 2 here in before, but to accommodate following accessories :- (i) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuit pro-tection having double insulation & positive insulation-01 No.
Outgoing :- (i) Aluminium busbar rating 500 Amps rating 04 Nos for outgoing connections all as required and as directed.
(ii)MCCB 250A 25kA 4 Pole-03nos, MCCB 100A 16kA 4 Pole-02nos,MCCB 63A 16kA 4 Pole-01nos
(iii) Current transformer 500/5Amps class-1 15 VA - 1 Nos.(iii) Digital Ammeter with inbuilt selector switch for Incommer and for each outgoing suitable as per load. (iv) Digital Voltmeter with in built selector switch-01 No. (v) Modular Indication lamp LED type RYB (set of 3) with analog street light timer switch with contactor for B CAMP Sub Stn No. 02 | 1 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
BOQ_869004.xls
BOQ • 0.64 MB
TENDERDOCUS53.pdf
Tender Documents • 1.41 MB
Download all tender documents and submit your bid