Special Repair to Toilet and Bathroom of Bldg No P-241 and P-230 (OTM) at New Mil Stn Kapurthala under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 300 x200 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 15 mm thick cement screed bed (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid seperately.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of Ceiling and applying three coats white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on old plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Charge.

S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm incl PCC (1:3:6) filling in frame complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge.

S&F factory made second class, hard wood, 30mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc (without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engr-in -Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge.

S & F steel window 1.25mm thick Box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately under appropriate item.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter:- (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work as specified and directed by Eng-in-Charge.

S&F steel ventilators fixed type with glazing bars etc complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick plain glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed by Engr-in-Charge.

S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 25mm dia laid in floor / trenches or fixed to walls complete all as directed by Engr-in-Charge.

S&F GI tubing 25mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop valve/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed by Engr-in-Charge.

S&F for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose size 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolition of mud in roof any thickness including plastering & leeping removed complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound complete all as specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid seperately.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multi polymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:5:10) type E2 using 40mm graded aggregate as in sub base complete all as specified and directed by Engr-in-charge.

M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 25mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed by Engr-in-Charge.

All as per item no 56 above but except brick tiles complete all as specified and directed by Engr-in-charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed by Engr-in-Charge.

S&F in repairs of vitreous china urinals bowl type of size 465 x 355 x 265mm (flat back or corner wall type) complete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, jointing around urinal back in cement paste including flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe incl PVC connection length of 450mm complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as directed by Engr-in-Charge.

S&F 75 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend with complete all as directed by Engr-in-Charge.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engr-in-Charge.

S&F 110mm PVC vent cowl complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 2000 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) of capacity 2000 Ltrs hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing tank of any description, capacity complete all as specified and as directed by Engr-in-Charge.

S&F in repair gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 25mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and as directed by Engr-in-Charge.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engr-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for:- (a) One light point controlled by one, one way switch

One fan point controlled by one, one way switch

One socket outlet 3 Pin, 5 Amp on independent board

M&L for point wiring with 4.00 Sqmm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 5 Amp complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and as directed by Engr-in-Charge.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specified and as directed by Engr-in-Charge.

Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED lamp 09W complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape complete all as specified and as directed by Engr-in-Charge.

S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high S&F in replacement Exhaust fans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and as directed by Engr-in-charge.

Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and as directed by Engr-in-Charge.

Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- (a) S&F of MCB, 10 to 32 Amp, SP, 240 Volt complete all as specified and as directed by Engr-in-Charge.

S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt complete all as specified and as directed by Engr-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-in-Charge. Note:- Three run of 6.00 Sqmm cable and one run of PVC Conduit shall be measured & paid as one unit.)

Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed by Engr-in-charge.

M/S Satguru enterprises