Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC HOUSE NO 11 VILLAGE POST SAIGAON THE BHALKI DIST BIDAR STATE KARNATAKA 585416 | BIDAR | KARNATAKA | 585416 | L1 | Accepted-AOC lowest tenderer | |
| 2 | L2₹21.1 L+₹3.9 L (22.6%)Rejected-Finance PLOT NO 14 NEAR BALGRAM INS SHIVAJI ROAD LONAVLA 410 401 | PUNE | MAHARASHTRA | 410401 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹21.8 L+₹4.6 L (26.4%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
17 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
P Bangar Raju,IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
ADDN / ALTN TO EXISTING WASHROOM FOR WOMEN TRAINEES AT CMET AND TRAINING WINGS (BLDG. NO P-213, P-230, P-238, P-342, P-343, P-367, P-523) AT INS SHIVAJI LONAVLA
2022_MES_571501_1
GE/LONAVLA/8117/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹44,000
Yes
31 Jan 2023
27 Dec 2022
19 Jan 2023
27 Dec 2022
17 Jan 2023
30 Dec 2022
27 Dec 2022 - 29 Dec 2022
Amount
Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.
Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.
Demolition of cement concrete (unreinforced) in sunken floors and in any description
Dismantling of existing water proofing treatment treatment if any consisting of cement mortar,tarfelt and foreign materials etc incl cleaning the surface and removal of dismantled materials outside MD land as direted by the Engr-in-charge.
Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6
M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4
Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors/ walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4
M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.
S&F for Renewing glazed wall tiles in patches, area n exc 5 sq. m. including cutting out broken tiles, removing and cleaning loose tiles, preparing bed, removing rubbish and replacing old with new tiles to match, complete with all cuttings, etc. and laying or setting, jointing and pointing new or old tiles complete
S&F for Renewing floor tiles in patches, area n exc 5 sq. m. including cutting out broken tiles, removing and cleaning loose tiles, preparing bed, removing rubbish and replacing old with new tiles to match, complete with all cuttings, etc. and laying or setting, jointing and pointing new or old tiles complete
M&L for 15mm thick plastering over the floor and side walls of sunken portion in CM 1:3 mixed with water proofing compound of approved quality @ 1kg per bag of cement including rounding of all corners wherever required, smooth, rendering, curing etc complete also providing 40mm Dia HDPE spout pipe of 60cm long in external wall and as per instructions of ENgineer-in-Charge.
Material & Labour for preparing RCC sunken floor surface to made dry, clean, even and checked for soundness, removal of oil, dirt, laitance and other contaminants by manually and surface shall be fairly smooth finish, chamfering the floor wall junction with CM 1:4 admixed with Nitobond SBR or equivalent @ 1 Litre per 50 kg bag of cement. Down take rain water pipe annular space packing using Conbextra GP2 or equivalent mixed water and filling as per manufacturer's specification. Water ponding for min 48 Hrs and injection grouting of construction joints, leaking spot and honey combs with cementitious pressure grouting with 40 psi pump using Cebex 100 or equivalent @ 225 gms mixed to 50 kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface and 1.5 mm thick with 2 coats with interval period of 6 hrs over a substate at a coverage rate of 2 kg/ sqm using spray/ squeegee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90) tear resistance of 21 KN/m(ASTM D624-00), and tensile strength of > 1.9N/mm2(ASTOM D412-90), Termination to be done on wall extending the coating to min 300 mm height above the finished floor level as per vendor recommendation. Laying 200 gsm non woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete complete all as per manufactures instruction and as direcetd by Engr-in-charge. Make FOSROC/Dr fixit or equivalent as given in approved list of makes.
Material and labour for plain cement concrete type D2, 1:4:8 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.
Material and labour for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring complete all as specified and as directed.
M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry
M&L for half Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in in CM 1:4
M&L for 5mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement all as specified and directed.
M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)
M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)
Supply Integral Water Proofing Compound
M&L for preparation of new plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.
M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty
M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.
M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.
Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.
S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..
S&F in repairs PVC (SWR) bends of 110 mm dia bore with access door
S&F PVC (SWR) bends of 110 mm dia bore
S&F PVC(SWR) vent cowl of 110mm dia bore.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm dia
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia
S&F in repairs PVC (SWR) bends of 75mm dia bore with access door
S&F PVC (SWR) branch piece, single (double Y) equal or unequal 75 mm dia
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia
S&F in repairs Stack clamps made out of 50mm x 5mm flat iron fixed to any dia of pipe at any height. Including bolts and nuts and securing ends of stays to wall or roof
M & L PVC Nahani trap 75mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)
S & F in repairs Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap complete all as specified
S&F in repairs Vitreous china squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe anti- syphonage pipe, complete all as specified.
S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings all as specified
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets
Repairs to PVC flushing cistern including replacement of top cover, flushout pipe, ball valve, float and handle including brackets
S&F in repairs Vitreous China urinal, coloured of size 420x395x635mm large flat back with all fittings including spreader, CP connection suitable for 15mm bore stop valve, discharge pipe and taking down the existing one.
S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe
S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe.
S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs
S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.
S&F Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware.all as specified and directed
CP hand Health faucet of brass body with wall hook and 1mtr stainless steel braided rubber hose pipe fixed in repair complete all as specified and as directed.Make: Cera Cat No F8030102 or equivalent in Hindware / Parryware.
S&F in repairs pvc flexible waste pipe of length n exxc 1m and dia 32/40mm fixed to wash basins.
S&F Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes as specified
Towel rail brass chromium plated fancy type 60cm long including bracket fixed between flanges complete Make: Cera Cat No. F5007103 or equivalent in Hindware/ Parryware
Taking up or down steel tubing of bore 15/20 mm and connection, including cleaning for refixing or removal complete all as specified.
Taking up or down steel tubing 25/32 mm and connection, including cleaning for refixing or removal to store complete all as specified.
Taking up or down steel tubing 40/50 mm and connection, including cleaning for refixing or removal to store complete all as specified.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F CPVC pipes, SDR 11, 32 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
Dismantling PVC water tanks capacity n exc 2000 and removing
S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) of 2000 ltrs capacity hoisted and fixed in any position all as specified
S&F in repairs ball or float valve 32 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.
S&F Powder coated aluminium alloy curtain rod of any size including fancy type brakets all as directed by Engg-in-charge
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation , etc or for shafts, wells, cesspits, manholes, pair holes, etc n.exc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dense soil.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete.
M&L rendering in CM (1:4) 15mm thickness on fair face of brick/concrete surfaces mixed with water proofing compound finished even and smooth without using extra cement (water proofing compound measured separately).
supply only water proofing compound
M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of masonry including watering slightly rounded, including necessary form work.
Returning filling in, including, spreading levelling watering and well ramming in layers not exc 25cm in soft/loose soil etc complete.
Removing excavated material exc 250m but n.exc 500m and depositing where directed as in soils.
S&F factory made moulded PVC double door frame of size 50 mm x 95 mm made out of 5 mm single side prelaminted PVC sheet reinforced with MS Square tube all as specified and as directed .
S&F for 30 mm Factory made Moulded door shutter - Wood free consisting of frame made out of M.S. tube of 19 gauge thickness and size of 25 mm X 25 mm for stiles, top and bottom rails M.S. frame shall have a coat of steel primer. The inner panel shall consist of 25 mm thick High density EPSconforming to IS 4671-1984 bonded with 2 mm termite proof, water proof and fire resistant molded PVC sheet with 2,4,6 raised panel designs in different plain and / or prelam colours after routing the Moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of the panel is to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2 nos , PVC sheets of 5 mmt thickness using PVC solvent cement ) and stile sides 25 mm (5mm x 5)thick and 30mm wide PVC sheet fitted along M.S tube for lock provision & for lock height 5 mm thick PVC sheet of 150 mm x 100 mm fixed with upper & lower face of inner side of EPS panel and manufacturer's specification & drawing etc, complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F in 125 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F Aluminium bow handles, cast type, anodised 150 mm long
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F for rolled steel section/ ms plates as in Posts, trusses (framed) Purlins, Rafters, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections of Fe410-W (Gde-E-250) qualit-A including fixed with welded/ rieveted joints or distance pieces, cleats etc.
S&F for rollled steel section as wind ties over roof sheet including securing with bolts/J hooks or self tapping screw at any height including necessary scaffolding etc all as directed Enngineer-in-charge
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any design/colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws at any height all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty
M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.
M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main 'T' runner 38mmx25mmx1.5mm and secondary/cross 'T' runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long, icluding romoving and refixing of existing fittings and fixtures complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.
S&F 4 mm thick Non Asbestos (E-board) designer tiles (Electra) suitably fixed in false ceiling grid /frame with staples or screws complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for issue under Schedule of credit and making good disturbed surfaces of walls, floors, etc.
M & L for point wiring with 1.5 sq mm single core FRLS PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as s specified and directed for following. (a) One light/Fan point controlled by one switch.
(b) One socket 3 pin outlet 5 amp on independent board.
All as per item no 90 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm.
S&F in repairs switch piano flush type single pole one way 5 amp.
S&F in repairs ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified.
S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type universal.
S&F in repairs switch socket combination 2 in 1,5 amp flush type.
Labour for taking down and after repairs refixing to Ceiling Fan, Exhaust Fan, any Make & any Sweep Oiling, Greasing , removing all dust with painting and replacement of unserviceable spares, complete all as directed by EIC at site. NOTE : Spares shall be measured & paid resperative item of this sch.
S&F of Tubelight Rod ultra bright LED tubelight with very high efficacy suited for installation in existing tubelight G13 lamp holder to give glare free light for 18W20W/22W complete all as required at site and as directed by Engineer -in-Charge. Make : Havells,CRYSTAL812DSTL20WLED865GLASS or equivalent of Bajaj/Philips / Wipro
S&F of surface and wall mounted reagal batten for 18W20W/22W compact batten suitable for single LED Tubelight with integral LED driver complete with all accessories complete all as required at site and as directed by Engineer -in-Charge. Make : Havells,REGALBATTENT8UPTO1X22WSSBSWH or equivalent of Bajaj/Philips / Wipro
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completewith aluminum housing & integrated electronic driver . Make: Havells Lumiine+BS10WLED865SPCSS or equivlent Bajaj/Philips
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. Make : Anchor / Cona / Bajaj
Supply and fix new adore LED lamp 9 Watt Inverter bulb B22 CDL confirming to Cat No LHLDEGEDML8009 of Havell's or euivalent in Philips / Bajaj
S&F in replacemen MCB DB SPN 6 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed
S&F in repairs MCB SPN 40 to 63 AMP, 240 Volts 10KA 'C' curve , Complete all as specified and directed.
S&F in repairs MCB SP 5 To 32 AMP, single pole 240 Volts 10KA 'C' curve, Complete all as specified and directed.
Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.
M&L for sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Three run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.
M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.
VIJAYA ENTERPRISES
M/s S.D Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .