Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.8 L
Closing Date
15 Oct 2026, 2:00 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CPO-SOUTH ZONE
TENDER FOR TANK REPAIR WORK AT CASSIMODE BLOCK OIL TERMINAL. OVERALL L1 BASIS
2600027945-HD-07750
5100027945
Open Tender
Two Bid
Unknown (Unspecified Location)
₹0
₹1.8 L
15 Oct 2026
22 Sept 2026
15 Oct 2026
15 Oct 2026
24 Sept 2026 - 9 Oct 2026
| Item No | Item Title | Description | Qty | Unit |
|---|---|---|---|---|
| 1 | FAB - BOTTOM & ANNULAR | FAB - BOTTOM & ANNULAR — Cleaning the protruded annular plate surface by removing the bitumen, rust deposists and applying 1 coat of tank mastic protective primer & 2 coats of acrylic polyurethane finish paint | - | meter |
| 2 | SPLY AND LAYG OF | SPLY AND LAYG OF — Breaking the concrete of sand pad apron upto below the annular plate, Filling Bitumen sand mixture between the annular plate and the apron for a width of 50 mm all around the tank. | - | meter |
| 3 | ERECTION OF SCAFFOLDING | ERECTION OF SCAFFOLDING — Erection of double scaffolding all around the tank with steel structurals(20 m dia * 16.5 m Height) | - | square meter |
| 4 | RPLCMNT,OF WIND SCREEN | RPLCMNT,OF WIND SCREEN — Erection of GI screen wall for tank 20 m Dia * 16.5 m Height | - | square meter |
| 5 | WELDING OF PATCH PLATE | WELDING OF PATCH PLATE — Gouging and removing the existing corroded steps, Welding a patch plate of size 300 x 150 x 8 mm on the shell plate, Fabricating and welding a new step of size 800 x 200 mm and positioning the same with 50 x 50 x 6 mm angle base support. | - | Each |
| 6 | Power tool buffing corroded steps 1973-CASSIMODE BLACK OIL | Power tool buffing corroded steps 1973-CASSIMODE BLACK OIL — Power tool cleaning the balance steps to remove the rust, repairing by weld build up. | - | Each |
| 7 | DISMAN SHELL PLATE&WIND | DISMAN SHELL PLATE&WIND — Cutting & Removal of corroded wind girders on the 5th & 8th shell, lowering and shifting to scrap yard | - | Running Meter |
| 8 | WELDING OF PLATE BUILD- | WELDING OF PLATE BUILD- — Weld Build up at the shell to bottom plate & roof areas due to corrosion | - | Each |
| 9 | WELDING OF SHELL PLATE | WELDING OF SHELL PLATE — Welding a patch of size 500 x 500 on the shell plate, roof plate, by providing MS plate of suitable thickness | - | Each |
| 10 | FAB AND EREC OF WIND | FAB AND EREC OF WIND — Supplying, Bending, Lifting, Setting & Welding a cover plate of width 500 mm and thickness 8 mm covering the existing primary & secondary wind girder area, including Supplying, Fabricating & erecting the new wind girders on the 5th & 8th shell. | - | kilogram |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2600027945-HD-07750.pdf
TENDER_DOCUMENT • 21.87 MB
2600027945-HD-07750_1.pdf
ADDENDUM_DOCUMENT • 21.87 MB
2600027945-HD-07750_1.pdf
ADDENDUM_DOCUMENT • 21.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .