Special repair works to be carried out for the existing Fire and Rescue Service building at VEDHARANYAM in Nagapattinam District

Amount

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

41) Painting 2 coats - New "iron work"

Electrical arrangements 73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase 32A per way with neutral link

74) Charges for assembling and fixing of ceiling "Fan"

238) Anticorrosive treatment for steel reinforcement rods

Annexure 3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand with Admixture a. In Ground Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture b. In Ground Floor

14.2.1) Precast Cupboard slab 40mm tk in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor

18.1) Formwork using M.S.Sheet b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.5.3) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

21.5.4) Supplying and fixing in position of UPVC louvered ventilator type for all sizes

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of colour Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement for inner new walls

38.4.3) Painting the old walls with two coats of Oil Bound Distemper including thorough scrapping

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

40.1) Two coats of painting over the old wood work including Removing old paint from doors, windows & wood works by manual labour

43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52.2) Supplying, laying, fixing and jointing the following dia UPVC pipes with PVC special clamps etc., a. 32 mm dia

b. 25 mm dia

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming lS: 694:1990 for Fan point (Open wiring)

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring) using PVC electrical box

69.1) Supplying and fixing of 15 amps 3 pin flush type plug using (PVC Box, Fire Retarded Box)

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.7.1) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

87.1) Supplying and fixing of Three Phase ELCB/RCCB

90.2) Providing additional strutting to centering of plain surface

110) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA

119) Supplying and delivery of 1 HP single phase piston type motor

120) Labour charges for erection of 1 HP Single phase piston type motor

122) Supplying and fixing of following dia of the PVC, GI, CI & GM specials a) 40mm dia CI foot valve with stainer

b) 40mm dia GI Flange

c) 40mm dia UPVC Union

d) 40mm dia UPVC Bend

e) 40mm dia UPVC Tee

f) 32mm dia UPVC Bend

g) 32mm dia UPVC Tee

h) 32mm dia UPVC Coupling

i) 32mm dia GM Gate valve

j) 32mm dia UPVC Union

125) Supplying and delivery of following dia UPVC pipe a) 40mm dia UPVC Pipe

125.4) Supplying and delivery of following dia Special blue PVC pipes for Borewell a) 110mm dia Special Blue PVC pipes

b) 110mm dia Special Blue PVC Slotted pipes

132.4) Drilling of borewells of size 4" to 5" dia. in Sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes

160.1) Supplying and fixing of 40 Amps cam operated Rotary switches with 3 Nos. of Indicator lamp including inter connection wire

238.1) Anticorrosive treatment for window grills

272) Providing two legged scaffolding using 13 to 15 cm dia casurina post with country wood planks (Silver Oak) 40mm thick a) 5.5m height in addition of 2.5m height

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

796) Two coat of plastic emulsion paint including primer

796.1) Painting the old walls with two coats of emulsion paint without primer and including thorough scrapping

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.3) Clean removal of cement plaster from the existing wall surfaces

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Under 3.00m height

800.9) Dismantling, clearing away and carefully stacking materials useful for reuse for old steel Windows and ventilators including removal of frames, hinges and fastenings

800.11) Dismantling, clearing away and carefully stacking materials useful for re-use of Plain cement concrete

BMB BUILDERS & DESIGNERS