Provn of certain road works under GE (West) JRC

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and as directed by Engineer-in Charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level not exceeding 1.50m above then starting point.

Rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne capacity power road roller, watering as necessary including filling in hollows and depressions and consolidating to the required level, gradient and camber complete all as specified

M&L for 150 mm spread thickness soling (or sub base ) with broken boulders or quarried stone interestices filled surface formed and rolled and consolidated to required camber and gradient complete all as specified

M&L Water bound macadam (WBM), 150 mm thick (compacted thickness), in two layers of 75mm thick each with crushed stone aggregates of grading 2 ( 63 to 40 mm size) (granite), spread, rolled with 8 to 12 tonne power roller and consolidating to required gradient and camber complete, all as specified.

M & L for Preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M & L for applying a tack coat of paving bitumen VG-10 @ 10Kg/10 Sqm of road surface complete all as specified and directed.

M & L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-30 complete all as specified and directed.

M& L for Preparing bitumen macadam surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 40mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 12 ton power road roller to required camber and gradient, complete all as specified and directed.

M & L for Precast factory made cement concrete solid blocks for road edging exc 10 cm in width and setting in CM 1:6 type B1 1:2:4 continous on both sides of road complete including necessary excavation embedding blocks in the ground to required depth, tamping around and removing surplus spoil and deposited to a distance not exceeding 50m complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA stiplens reflector of model No DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions as specified and directed

Providing and marking broken centrle line/side lines /zebra lines, dashes, arrows, etc on road pavement and the like of any descriptions and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and most (Ministry of suface Transport)specification 2001(4th revision)complete all as specified and as directed

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified

M&L rendering 15 mm thick on brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified

M&L Hard core of broken bricks/stone boulders of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thck watered and ramemed to a true surface

M&L cement concrete 100mm thick type D2, 1:4:8 ( 40 mm graded agg.) in foundation and mass concrete.

M&L for Sand filling under floors or in foundations in-cluding watering and consolidation for laying interlocking tiles

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment complete all as specified and directed.

M&L cement concrete type D2, 1:4:8 ( 40 mm graded agg.) in foundation and mass concrete.

M&L for cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 15 cm complete all as spd.

M&L for forming 12mm thick expansion joints, thickness of concrete slab 150mm and filled with pre -formed bituminous filling and top 30mm primed and sealed with sealing compound, Grade 'B' complete

M&L for forming Contraction (Dummy) joints 30mm deep x 10mm wide,filled with sealing compound, in concrete slab/pavement complete all as spd.

SANDEEP JHANJI CONSTRUCTIONS