Rejuvenation of Existing Openwell and Providing Rain Water Harvesting Structure Arrangements at JJ Nagar in Ward No.88, South Zone.

Clearing of bushes, grass, and undergrowth around and inside the open well area including uprooting of vegetation and disposal of the same up to a lead of 50 meters, complete as directed by the Engineer-in-Charge.

For Removing Thick Bushes In Well Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in a stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal and vertical tubes joint with cup and lock system with M.S. tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc., wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.

ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

For Lift 0.0 to 2.0

For Lift 2.0 to 4.0

Plain Cement Concrete 1:2:4 (M-15) (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10- 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over apriming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. (Sl.No.395)

Providing and fixing M.S Ladder 600mm wide, with vertical angle 65x65x6, Horizontal 16mm Dia. MS Bar @ 300mm C/c with 50x50x6 MS angle support @ 3000mm C/c with necessasry painting and fixing in Concrete block etc. complete.

Providing Barbed wire (Two Ply and Four Pronged) fencing fixing horizontally in 5 rows, with L angle 50X50X6 mm ht. 2.5m (0.45m below G.C.) @ 2.5m interval set in 1:3:6 mix using 20mm jelly including tying the binding wire etc., complete, over UCR Masonry of 0.45m thick and 1m height. (0.5m below ground and 0.5m above ground) including necessasry PCC, Coping in M-150, pointing in CM: 1:3 and painting with cement paint,etc. complete.

Providing and fixing wicket gate 1.0 M Wide foor compound with 20 mm dia G.I. PIPE APPROVED GRILL WORK, RCC M-155 Side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting, etc, complete.

Supplying Mild Steel Grills over the open well including painting etc. complete.

Fixing in position mild steel grills for windows, ventilators, etc.

Construction of underground filter having size- 1mx1m. Inside with 230mm thick brick masonry, with inside-outside plaster, bed concrete and coping in M-15 Grade including filling filter sand (of size 1mm to 2mm) 500mm thick over garvel (of size 5 to 10mm) 500mm thick over Boulder (of size 5 to 20mm) 500mm thick with all labour material etc. complete.

Construction of underground Chamber having size- 0.60mx0.60m inside with 230mm thick brick masonry, with inside-outside plaster, bed concrete and coping in M-15 Grade including excavation and necessary labour and material etc. complete.

Dewatering using 3HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.

Supplying PVC Pipes for rainwater harvesting [working pressure: 4kg/Sq.cm]

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Panel board (for 7.5hp Motor)

Supplying and erecting 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

( 7.5HP-5.5KVAR )

Supply of 2 core 4 sq.mm Aluminium conductor PVC insulated LTUG cable

MAINTENANCE WORK

Maintenance of 7.5 hp pump including servicing and maintenance of key items such as; Lubrication, bearing, Seals & Gasket, Impeller, Valves, Piping, Electrical components, performance monitoring, Cleaning etc. 7.5 hp pump cost 150000 Rs -Market rate (30 % Cost of pump)

Maintenance for 3 Years

For First year

For Second year

For Third year